Sub: NAD 320 BEE pre in/out interconnect

rashmikant · #1 29-08-06, 01:20 PM

Mr.Mohan,

NAD 320 BEE should i connect pre in/pre out with good qaulity cable(Inter Connect)(remove jumper between pre in/out) and it is true if this interconnect produce very audiophile terrific sound? which cable shoud use?

Ajay Kamath · #2 29-08-06, 07:37 PM

Quote:

Originally Posted by rashmikant

Mr.Mohan,

NAD 320 BEE should i connect pre in/pre out with good qaulity cable(Inter Connect)(remove jumper between pre in/out) and it is true if this interconnect produce very audiophile terrific sound? which cable shoud use?

At this level, I don't think you should bother. You can however try by borrowing a good quality cable on trial basis from a friend or retailer, hear the setup with and without the RCA cables and keep it if you like it. I doubt that you will however be able to percieve the change. I have sufficient experience with the NAD C320BEE, and I havent found this to be very helpful.

Dr.Bass · #3 30-08-06, 10:34 AM

Exactly....
With a NAD320BEE, you would hardly hear any difference between a 1000 rupees cable/interconnect and a 5000 rupees cable/interconnect hence please save your money and dont even think of going into expensive cables and interconnects. Instead use that money to buy CDs...

neo · #4 31-08-06, 03:56 PM

I use the nad 320BEE & i've changed the jumpers with kimber & there is a def improvement in the soundstage.It all boils down to your system in totality.

Jagat · #5 04-09-06, 02:39 PM

There is a definate improvemnt by using good quality jumpers between the pre-power in the NAD 320BEE. I noticed it during my audition.

For those interested check out http://www.russandrews.com/lookup/1/...mpers-2031.htm

manek · #6 05-09-06, 12:37 PM

I use VDH D102MKIII jumpers(same as my interconnects) and the difference is very noticable.

Another thing you could do with your 320bee is to change the power chord. Even using a finolex home electrical two core wire(16-18 AWG) makes a diff. If you are worried about the warranty...please ask your dealer to do this for you.

Try and plug the open/unused RCA sockets with dud RCA plugs. Wrap the dud plugs in teflon tape.

manek.

rashmikant · #7 15-09-06, 03:15 PM

Hi Ajay,

Have u recomnded good budget book shelf with nad 320 bee?reply

Mohan · #8 16-09-06, 10:06 AM

You can consider the Wharfedale Diamond 9.1 or MA Bronze B2

Jagat · #9 19-09-06, 10:10 AM

Quote:

Originally Posted by manek

I use VDH D102MKIII jumpers(same as my interconnects) and the difference is very noticable.

Another thing you could do with your 320bee is to change the power chord. Even using a finolex home electrical two core wire(16-18 AWG) makes a diff. If you are worried about the warranty...please ask your dealer to do this for you.

Try and plug the open/unused RCA sockets with dud RCA plugs. Wrap the dud plugs in teflon tape.

manek.

Thanks for the valuable tips Manek.

Can you tell me where I can purchase the VDH jumpers you mention. Also I think the 352 does have an IEC power connector.

daumaster · #10 16-10-06, 11:34 AM

Why is the original power cord of the NAD 320BEE to be changed ?