My New DIY Project: 3-Way Floorstander

[bibin3210]

3-Way Floorstander using Peerless S20NI, SKO130 and Vifa BC25TG15-04

 

[anm]

interesting. any design goals in mind? What about the crossover and cabinet?

 

[bibin3210]

Hi,

Posting here a photograph of the completed product. Will be posting more detailed photographs and designs of the project soon.

Thanks,
Bibin

 

[Flash]

Brilliant-
Have you frozen down on the cabinet dimensions, Port tuning and crossover design ?

 

[avidyarthy]

Had a look at the email ....... FANTASTIC!

 

[gopib]

Was this a kit? Did you build the X-over or was it a kit also. Some more details would be nice,

TIA

 

[bibin3210]

Hi Flash,

Yes, everything is done. I will post more photos and details soon.

 

[bibin3210]

Hi Gopib,

It is not a kit...everything started from scratch......

 

[Flash]

Hi Flash,

Yes, everything is done. I will post more photos and details soon.

I have seen the pics ... jeetubhai sent out an email yesterday with the link ... I just happened to check the link a short while ago

Brilliant job ....

 

[gopib]

I too saw the exhaustive pictures. You have captured almost all the steps.
Now need to understand the design aspects.

Thanks

 

[ukjeyaraj]

Amazing work. I have already posted my comments in your google plus site.

 

[bibin3210]

These are the drivers i have selected for this project:
1. Peerless S20NI (Varsha Electronics)
2. Peerless SKO130 (Varsha Electronics)
3. Vifa BC25TG15-04 (Part Express)

 

[bibin3210]

Enclosure Design. The calculations are done using BassBox Pro 6 and the drawings are made on CorelDraw.

 

[bibin3210]

X-Over:
Used X-Over3 Pro,X Over Frequencies: 1000Hz & 5000Hz

 

[bibin3210]

Other Accessories:
1. Grill Lock (Part Express)
2. Spike Set (Part Express)
3. 4mm T-Nuts and Allen head Bolts (From Coimbatore)
4. Binding Post (MX)
5. Grill Cloth (Part Express)

 

[bibin3210]

Few major tools i have used for the enclosure work:
1. B&D Router
2. B&D Circular Saw
3. B&D Jig Saw
4. B&D Cordless Hand Drill
5. B&D Hand Drill
6. Air Compressor
7. HVLP Spray Gun

 

[ukjeyaraj]

Where did you procure crossover components? Please share the Crossover design.

 

[avidyarthy]

What else do you fabricate other than this one-off speakers .... thats a hell lot of tools at your disposal!

 

[bibin3210]

@aidyarthy, basically i am a software engineer by profession. It is one of my passion to collect tools and work with it. These are just few of the power tools from my collection. There are lot many in my work room.......

Thanks for the comment.....

 

[avidyarthy]

Wrong profession ...... BTW, the red Punto looks great too .....