10000 mfd Capacitors:

[flat_listener]

Hi all,

I am looking for 8 nos. 10000mfd /100vdc snap in type electrolytic capacitors for power supply filtering.
Any on line source where i can procure these?

TIA

 

[manniraj]

Try Samwha/Keltron/Nichicon/Elna caps for power filtering and you can try the following online sites:

Next Buy Online Electronic Components - Diversified Shop : ElectronComponents.com

The online electronic components Store at the best price in the market with wide range of products and hassle free service. Semiconductors, Connectors, Embedded, Programmer, Optoelectronics, Transistors, Capacitors, Resistors, Inductors, Relays, Sensors, New Technologies and Robotics for...

www.electroncomponents.com

https://www.electronicscomp.com/

Project Point

My Store

projectpoint.in

Parts For DIY Audio Speakers Amplifiers

Parts For DIY Audio Speakers Amplifiers Speakers Crossovers

theaudiocrafts.com

diycomponents.in

diycomponents.in

 

[flat_listener]

Thanks manniraj, ordered from theaudiocrafts.

 

[manniraj]

Nice Elna caps are very good for power supply and by the way which amp needs max of 100v

 

[johnmicheal]

You should try Cornell dublier or Nippon chemicon for 100V,most High current amplifier are built with these. Easily available at Mouser,RS component.

 

[flat_listener]

Nice Elna caps are very good for power supply and by the way which amp needs max of 100v

For a 400 WPC amp power supply. The trafo is 60-0-60 vac secondary, which after rectification will be 85VDC. So, to be in SOA this was sought.

 

[OM_2K19]

The trafo is 60-0-60 vac secondary, which after rectification will be 85VDC.

Even with a very high ripple factor, the dc voltage will be always less than the peak voltage i.e. 85V if I still remember the bridge rectification concept correctly.

 

[OM_2K19]

Even with a very high ripple factor, the dc voltage will be always less than the peak voltage i.e. 85V if I still remember the bridge rectification concept correctly.

** typo, low ripple factor..