M16KI -6.5" KEVLAR TRUNCATED FRAME

[rajesh srinivas]

Does M16KI -6.5" KEVLAR TRUNCATED FRAME need to be flush mounted/recessed to be used in a 3way on front baffle.


Since its suggested Peerless truncated frame design driver does not need a countersink and also the frame edge is in a roundover shape.

 

[rajesh srinivas]

Since no response from anyone, i would go flush mounting but not to the extent of flange thickness slightly less.

Thanks
rajesh

 

[tuff]

You could post this in the DIY section. Members who have knowledge about crossovers and drivers are usually lurking around there. good luck.

 

[rajesh srinivas]

thanks