soundnovice
Active Member
there are no much reviews about this not-so-famous chip, but seems pretty much promising. The TBIsound's Millenia MG3 amp uses a chip from same TPAxxx series. couple of members on diyaudio.com who have tried this have good impressions.
being low power and highly efficient (90% :clapping: ), this is most suitable for high efficient fullrangers in horns like from fostex or mids/tweeters in case of active speakers.
reviews:
TBI Millenia MG3 Class BD Integrated Audio Amplifier..A Modern Day Giant Killer!
tbi sound millenia
datasheet:
Speaker Amplifier and Modulator - Mid/High-Power Amplifier - TPA3116D2 - TI.com
cutting and pasting from above review,
" TBI has the quickness of the best OTL's and Class A's, it has the transparency and detail of the best SET and Class A amps, is has the speed and quickness of the best OTL's and Class A's, it has the smoothness and aliveness of the best Set and OTL amps, it plays vocals like the best SET and OTL's, and it images like the best OTL and SET amps. That is why I call this the JCOTLSETCLASSAPASS amp. If John Curl or Nelson Pass came out with a tube amp, this is what it would sound like. I would love to be Nelson Pass's neighbor and take this wee tiny TBI amp and put it on his monster horns. Even Pass would be surprised. "
some technical-review from below link,
Class-D amps offer highest programmable switching rate - Electronic Products
" Suited for use in soundbars, after-market automotive solutions, portable audio docks, and LCD televisions, the TPA3116D2, TPA3118D2 and TPA3130D2 analog-input Class-D stereo amplifiers feature the industrys highest programmable switching rate and widest power supply range.Its highest programmable switching rates of 400 kHz to 1.2 MHz allow inductor filter-free operation and interference avoidance for clear audio with no distortions while its widest supply range of 4.5 to 26 V enables simultaneous operation of line power and battery power on the same board for longer battery life. The parts are also claimed to offer the best-in-class RDS(on) of 120 ? at 30-W x 2 20% lower than the leading competitor (improves efficiency by decreasing resistance during operation). In addition, thermally efficient FETs allow 30-W x 2 operation without the need for a heat sink, or 50-W x 2 with a heat sink (TPA3116D2 only). "
the 2.0 board on ebay costs around 25 USD shipped :yahoo:
TPA3116D LM1036 Amplifier Board with Tone 50W 50W | eBay
being low power and highly efficient (90% :clapping: ), this is most suitable for high efficient fullrangers in horns like from fostex or mids/tweeters in case of active speakers.
reviews:
TBI Millenia MG3 Class BD Integrated Audio Amplifier..A Modern Day Giant Killer!
tbi sound millenia
datasheet:
Speaker Amplifier and Modulator - Mid/High-Power Amplifier - TPA3116D2 - TI.com
cutting and pasting from above review,
" TBI has the quickness of the best OTL's and Class A's, it has the transparency and detail of the best SET and Class A amps, is has the speed and quickness of the best OTL's and Class A's, it has the smoothness and aliveness of the best Set and OTL amps, it plays vocals like the best SET and OTL's, and it images like the best OTL and SET amps. That is why I call this the JCOTLSETCLASSAPASS amp. If John Curl or Nelson Pass came out with a tube amp, this is what it would sound like. I would love to be Nelson Pass's neighbor and take this wee tiny TBI amp and put it on his monster horns. Even Pass would be surprised. "
some technical-review from below link,
Class-D amps offer highest programmable switching rate - Electronic Products
" Suited for use in soundbars, after-market automotive solutions, portable audio docks, and LCD televisions, the TPA3116D2, TPA3118D2 and TPA3130D2 analog-input Class-D stereo amplifiers feature the industrys highest programmable switching rate and widest power supply range.Its highest programmable switching rates of 400 kHz to 1.2 MHz allow inductor filter-free operation and interference avoidance for clear audio with no distortions while its widest supply range of 4.5 to 26 V enables simultaneous operation of line power and battery power on the same board for longer battery life. The parts are also claimed to offer the best-in-class RDS(on) of 120 ? at 30-W x 2 20% lower than the leading competitor (improves efficiency by decreasing resistance during operation). In addition, thermally efficient FETs allow 30-W x 2 operation without the need for a heat sink, or 50-W x 2 with a heat sink (TPA3116D2 only). "
the 2.0 board on ebay costs around 25 USD shipped :yahoo:
TPA3116D LM1036 Amplifier Board with Tone 50W 50W | eBay