Yamaha RN602 With Dali zensor 3

[Vivekathira]

I have an yamaha rn 602 with dali zensor 3... I have a bit doubt in connection.. as dali zensor 3 is 6 ohm speaker so how to connect it and on which ohm would be better..

 

[MaSh]

I have an yamaha rn 602 with dali zensor 3... I have a bit doubt in connection.. as dali zensor 3 is 6 ohm speaker so how to connect it and on which ohm would be better..

For 6 ohms nominal impedance speaker you should choose 4 ohm setting in the amp.

Source: https://www.manualslib.com/manual/986958/Yamaha-R-N602.html?page=52

MaSh

 

[Phew]

I have an yamaha rn 602 with dali zensor 3... I have a bit doubt in connection.. as dali zensor 3 is 6 ohm speaker so how to connect it and on which ohm would be better..

Since its a single pair you are connecting that's for the amplifier to decide, so plugging it in either will be OK. Just make sure it either A or B and not A and B

 

[Vivekathira]

Ohhh

Since its a single pair you are connecting that's for the amplifier to decide, so plugging it in either will be OK. Just make sure it either A or B and not A and B

.. ok i have connected in A

 

[Vivekathira]

Thank

For 6 ohms nominal impedance speaker you should choose 4 ohm setting in the amp.

Source: https://www.manualslib.com/manual/986958/Yamaha-R-N602.html?page=52

M

 

[bobbyndd]

Thank

Ahh.. a fellow Yamaha RN 602 user. How is the amp with your Dali's? Any feedback ?

 

[Vivekathira]

Ahh.. a fellow Yamaha RN 602 user. How is the amp with your Dali's? Any feedback ?

Its good ..

 

[greendream]

Its good ..

Thank you. I was looking for feedback from someone with that amp+speaker combination.
I am planning to buy used zensor 3,
Any members planning to sell can kindly message me.