rohitmusic
Well-Known Member
This is completely a different way to approach the problem.
(Big disclaimer: If you are not brand savvy and have patience..
)
I am mentioning this here at the risk of being completely OT, but believe me this is a very viable option if taking with the right mind set. So here it goes.
BTW since you are in bangalore and I see a lot of folks there having some DIY speakers, why dont you give that a shot. Just search around in the DIY section on the forum and see if you can get help from some FM who can setup a nice basic speaker for you.
DIY is not always cheap! This is I think the biggest myth that DIY=cheap
If you have a decent sized room then you can also try an open baffle design. See this.. JE Labs Arkiv: Open Baffle
You can get any decent full range driver and put it in this and enjoy great music.
OR do some research around the forum and see builds around the mark alpair 7.
This is one such thread to just give a pointer..
http://www.hifivision.com/diy/26268-diy-single-driver-fulll-range-speakers-ta2020.html
I would strongly suggest you please explore around this option and give it some time and at least sink in some of it if not all.
Since your query is regarding speakers so keeping it only to speakers. There can be very good options in amplification as well which can be achieved with help from very helping forum members. All we need is a little curiosity/passion and patience to get there.
(Hint: Check DIY ACA-Amp camp amp build and pass B1 build threads.)
I am just sharing these here so that later on you should not feel, I wish I knew better. So please treat this as just FYI and for your general knowledge
If not today it will definitely help you in future. Worst case just make a note and forget, nothing to loose. 
Cheers!
(Big disclaimer: If you are not brand savvy and have patience..

I am mentioning this here at the risk of being completely OT, but believe me this is a very viable option if taking with the right mind set. So here it goes.
BTW since you are in bangalore and I see a lot of folks there having some DIY speakers, why dont you give that a shot. Just search around in the DIY section on the forum and see if you can get help from some FM who can setup a nice basic speaker for you.
DIY is not always cheap! This is I think the biggest myth that DIY=cheap

If you have a decent sized room then you can also try an open baffle design. See this.. JE Labs Arkiv: Open Baffle
You can get any decent full range driver and put it in this and enjoy great music.
OR do some research around the forum and see builds around the mark alpair 7.
This is one such thread to just give a pointer..
http://www.hifivision.com/diy/26268-diy-single-driver-fulll-range-speakers-ta2020.html
I would strongly suggest you please explore around this option and give it some time and at least sink in some of it if not all.
Since your query is regarding speakers so keeping it only to speakers. There can be very good options in amplification as well which can be achieved with help from very helping forum members. All we need is a little curiosity/passion and patience to get there.
(Hint: Check DIY ACA-Amp camp amp build and pass B1 build threads.)
I am just sharing these here so that later on you should not feel, I wish I knew better. So please treat this as just FYI and for your general knowledge


Cheers!
Last edited: