Dear Team, This is going to be my first three way tower..I have been going through this forum I should appreciate the help provided to the fellow first timers...Ok, on to my project, below is my list of drivers...
Peerless woofer - sn20nl (8" driver )
Peerless Mid - sko130 (5.25")
Peerless tweeter - TL26SG
extracted woofer spec with LIMP(Arta) is as below
Fs - 43.21 hz
Re - 5.80ohms(DC)
Le - 525.27 uH
L2 - 1594.27uH
R2 - 31.89Ohms
Qt - 0.44
Qes = 0.48
Qms - 5.09
Mms - 37.96 gms
Rms - 2.023 kg/s
Cms - 0.000357 m/N
vas - 22.94 ltr
sd - 213.82 cm^2
I was able to simulate the woofer with Unibox, dual woofer is parallel, after going through this forum and some other forums, I am attaching the screeenshot and the graphs, Can somebody please advice if I am doing it right..
Thanks and regards,
Babu...
Peerless woofer - sn20nl (8" driver )
Peerless Mid - sko130 (5.25")
Peerless tweeter - TL26SG
extracted woofer spec with LIMP(Arta) is as below
Fs - 43.21 hz
Re - 5.80ohms(DC)
Le - 525.27 uH
L2 - 1594.27uH
R2 - 31.89Ohms
Qt - 0.44
Qes = 0.48
Qms - 5.09
Mms - 37.96 gms
Rms - 2.023 kg/s
Cms - 0.000357 m/N
vas - 22.94 ltr
sd - 213.82 cm^2
I was able to simulate the woofer with Unibox, dual woofer is parallel, after going through this forum and some other forums, I am attaching the screeenshot and the graphs, Can somebody please advice if I am doing it right..
Thanks and regards,
Babu...