Recapping: anyone who has replaced capacitors in their amplifier?

rwnano

Well-Known Member
Joined
Jul 21, 2022
Messages
1,130
Points
113
Location
Gurugram, Haryana, India
Wanted to understand how the sound differs from a old capacitor containing amplifier to the same amplifier with brand new ones?

Thank you for sharing your thoughts.
 
 
A conversation paused is not a conversation ended

Did you manage make progress with this?

I have few amps which I suspect have some capacitors which are failing (40-50 years old so obvious!), I have to recapp them but have been delaying doing anything. They do work but need attention for sure.

Please share your experience
 
A conversation paused is not a conversation ended

Did you manage make progress with this?

I have few amps which I suspect have some capacitors which are failing (40-50 years old so obvious!), I have to recapp them but have been delaying doing anything. They do work but need attention for sure.

Please share your experience
Had someone in Nehru place New Delhi do the Recapping
 
All sorted then, how much do they charge for this service? did you buy the capacitors or they can sort that. Asking here so that other can benefit from these questions as well - thanks in advance
If the capacitor has leaks, it should be replaced as soon as possible. When recapping, always go with good caps like Nichicon, Rubycon, and Elna.
 
It depends on which and what type of capacitors are being changed.

General rule of thumb is to never attempt a shot gun approach, meaning shouldn't change all caps in sight in one go.

Usually most benefit is gained by changing and slightly upping main and board specific filtering caps. And bypassing them with a small film cap. The bass response and high frequency resolution is improved thus.

Small value electrolytic caps in signal path changed with good film caps are known to give cleaner audio.

But this has to be done cap by cap and board by board. If a complete recap is done in one go and something goes wrong it is almost impossible to find what went wrong. So has to be done cautiously, thr rewards are generally good and at worst you at least get the reliability and age extension.
 
It depends on which and what type of capacitors are being changed.

General rule of thumb is to never attempt a shot gun approach, meaning shouldn't change all caps in sight in one go.

Usually most benefit is gained by changing and slightly upping main and board specific filtering caps. And bypassing them with a small film cap. The bass response and high frequency resolution is improved thus.

Small value electrolytic caps in signal path changed with good film caps are known to give cleaner audio.

But this has to be done cap by cap and board by board. If a complete recap is done in one go and something goes wrong it is almost impossible to find what went wrong. So has to be done cautiously, thr rewards are generally good and at worst you at least get the reliability and age extension.
Absolutely. Replacing all the capacitors might end some problems, or it might make the sound worse. Only replace electrolytic capacitors if they are faulty or leaking. A few months ago, I considered recapping my Nakamichi deck, even though it sounded fine, and reached out to some experienced technicians in Europe for help. They advised me that if the capacitors aren't leaking, I should avoid recapping; it could ruin the sound, even with top-quality capacitors. They completely dismissed the idea.
 
All sorted then, how much do they charge for this service? did you buy the capacitors or they can sort that. Asking here so that other can benefit from these questions as well - thanks in advance
Sanhwa capacitor in all the caps. They're from 2004 time so while in the capacitor plague times that's why got it replaced.
 
It depends on which and what type of capacitors are being changed.

General rule of thumb is to never attempt a shot gun approach, meaning shouldn't change all caps in sight in one go.

Usually most benefit is gained by changing and slightly upping main and board specific filtering caps. And bypassing them with a small film cap. The bass response and high frequency resolution is improved thus.

Small value electrolytic caps in signal path changed with good film caps are known to give cleaner audio.

But this has to be done cap by cap and board by board. If a complete recap is done in one go and something goes wrong it is almost impossible to find what went wrong. So has to be done cautiously, thr rewards are generally good and at worst you at least get the reliability and age extension.
Ok, thought its good to keep the original capacitor type - electrolytic as same than change to film? but if film is a good upgrade and works then why not
 
Wharfedale Linton Heritage Speakers in Walnut finish at a Special Offer Price. BUY now before the price increase.
Back
Top