Stabilizer for av receiver

[thomas2016]

Hi,

Do you think there is a necessity to place a stabiliser to the receiver? If so, which one would be better choice to make.

Regards,
Thomas

 

[Deleted member 38504]

It's took me 3 good reads to understand what you were asking for.
Lot of the members here use a brand called vertex.

A quick use of the search button would easily give you your answer.

Good luck.

 

[Dr.vinayaka]

You can also try- power Source-isolation transformer- connect to digi 300 . All the best. With regards. Vinayaka

 

[elangoas]

Do you think there is a necessity to place a stabiliser to the receiver?

If you have observed voltage fluctuation (or) if the voltage drops in the night, then good to add a stabiliser..

If so, which one would be better choice to make.

You can use the same one that is used for 1/1.5 Ton Air conditioners.. I have used it in the past and it worked without a glitch..

 

[thomas2016]

You can use the same one that is used for 1/1.5 Ton Air conditioners.. I have used it in the past and it worked without a glitch..

A google search for a stabilizer corresponding to 1.5 Ton AC gave me the following:
VG 400 AE15

Hope this suffices.

 

[elangoas]

A google search for a stabilizer corresponding to 1.5 Ton AC gave me the following:
VG 400 AE15

This should also work..

I had used this for my AVR, Everest EWD 400 - https://www.amazon.in/Everest-Booster-Voltage-Stabilizer-Conditioner/dp/B06XCBNMWS

 

[thomas2016]

This should also work..

I had used this for my AVR, Everest EWD 400 - https://www.amazon.in/Everest-Booster-Voltage-Stabilizer-Conditioner/dp/B06XCBNMWS

Thanks