This is my Simple TV setup.

Q Acoustics M20 HD wireless music system
O

omishra

Well-Known Member
Joined
May 31, 2011
Messages
2,357
Points
113
Location
Pune
My simple stereo setup for Living room. Unit is movable with all wiring inside.

  • 42" Pana Plasma C10 (Dec 2009) - Wall mounted.
  • WF Diamond 9.2
  • DIY Tripath Amp 100+100W (Silver color - thread in DIY section)
  • SoundFoundation Stands
  • DIY FFRC as speaker cable terminated with gold plated spade and Banana plugs at each end. http://www.hifivision.com/diy/19559-diy-articles-thread-2.html#post272072
  • TSHD+
  • Sony DVP-501 DVD player
  • [Xtreamer missing in Pic, was/will be on top of TSHD+ STB]
  • Powered with V-Guard Digital 200
  • All HDMI connection and Monitor out from TV is taken to feed amplifier using MX RCA cost 1.2K.
  • Provision for Gigabit Ethernet wired LAN connection (2) present, one wifi antenna hidden.

image517.jpg


Please note: Here everybody is viewer in living room. For listeners (only me and 9 year old son) I have different setup(under construction) in my bedroom. That I will show later.
 
Last edited:
Nice Pics. and a lovely Setup
Love the stands as well However I do find it a little low.
I could be wrong if it is ear level

I guess what Baijuxavior meant with more pics was individual pics of the components etc
 
omishra said:
What kind of picture should be taken? Please elaborate.
Click to expand...

As pointed out by another member, i was referring to the individual components. I was browsing on my phone and i could not differentiate the individual components.
 
Flash said:
Nice Pics. and a lovely Setup
Love the stands as well However I do find it a little low.
I could be wrong if it is ear level
Click to expand...
Thanks! These are standard stands from http://www.hifivision.com/group-buys-deals/18224-bookshelf-speaker-stands-soundfoundations.html#post250047

These stands are 26" high and speaker are over that. So center of driver approx 30" from floor and are at ear level.

jaudere said:
hi,
Nice set up there. Please tell me how have you secured the speakers on the stand.
Click to expand...
Thanks! Magna from forum provided transparent anti-skid pads of 10mm diameter which are fixed at bottom of each speaker corner.
Look here -> Anti Skid Resonance Control Pads

This is complete setup.
image517.jpg


Speaker terminals added to DIY FFRC speaker cables.
image518w.jpg


Speaker stand with WF Diamond 9.2 bookshelf speakers.
image519l.jpg


You can see audio wires and mains supply wires are concealed. Individual equipment has its own power mains switch.
image521.jpg


Xtreamer Sidewinder2 with 500GB internal HDD connected to internet/LAN PC using wired 100Mbps LAN, TS HD+.
image522i.jpg


My DIY amp as described above in previous post in this thread.
image523k.jpg


Sony DVD player, this item is very sparingly used as I dump DVD iso's in PC or HDD of xtreamer itself. Playback is easy and comfortable. V-Gaurd Digital 200 for controlling voltage which always remains towards higher side 230-255V in different time of day. All sockets are powered from it. Main switch at right side below TV is onetime ON/Off for all.
image524w.jpg


Right speaker.
image525d.jpg


My TV has only 2 HDMI ports. So I added this 3-1 ViewHD HDMI selector which selects Xtreamer and DVD player intelligently if powered on. Only 2 ports are used from it.
image526f.jpg


This is Panasonic Plasma 42" C10 model bought during Dec 2009 with 3 years warranty. So far no trouble. I calibrated its brightness, contrast, color, tint and sharpness using calibration/pattern DVD(downloaded). So clarity needless to say.
image527j.jpg
 
Last edited:
omishra said:
My simple stereo setup for Living room. Unit is movable with all wiring inside.

  • 42" Pana Plasma C10 (Dec 2009) - Wall mounted.
  • WF Diamond 9.2
  • DIY Tripath Amp 100+100W (Silver color - thread in DIY section)
  • SoundFoundation Stands
  • DIY FFRC as speaker cable terminated with gold plated spade and Banana plugs at each end. http://www.hifivision.com/diy/19559-diy-articles-thread-2.html#post272072
  • TSHD+
  • Sony DVP-501 DVD player
  • [Xtreamer missing in Pic, was/will be on top of TSHD+ STB]
  • Powered with V-Guard Digital 200
  • All HDMI connection and Monitor out from TV is taken to feed amplifier using MX RCA cost 1.2K.
  • Provision for Gigabit Ethernet wired LAN connection (2) present, one wifi antenna hidden.

image517.jpg


Please note: Here everybody is viewer in living room. For listeners (only me and 9 year old son) I have different setup(under construction) in my bedroom. That I will show later.
Click to expand...

Very Simple, Sober, elegant, Clean Set-up :)

Congratulations
 
Audio Technica AT-LP60X Fully Automatic Belt-Drive Turntable
Order now for just ₹19,990.00
Back
Top