Hi Guys,
I am planning to purchase a Floor standing speaker - Pioneer sp fs52, mainly to play music and a little bit of movies too. I already have a small Onkyo home theater system HTS-22HDX. Is it possible to connect the pioneer speaker to this Onkyo system without damaging either the speaker or receiver. Thanks and hoping for a quick response.
The specs are as below :
Onkyo receiver:
----------------------
Type:Bass-reflex with built-in amplifier
Rated Output Power(FTC):5 ch (FL/FR/C/SL/SR) × 25 W at 6 ohms, 1 kHz, 1ch driven, THD 1%1 ch (SW) × 47 W at 3 ohms, 100 Hz, 1ch driven, THD 1%
(IEC):5 ch (FL/FR/C/SL/SR) × 25 W at 6 ohms, 1 kHz, 1ch driven, THD 1%1 ch (SW) × 50 W at 3 ohms, 100 Hz, 1ch driven, THD 1%
Subwoofer Frequency Response: 35 Hz–200 Hz
Amp Frequency Response:FL/FR: 10 Hz–100 kHz (Direct mode)FL/FR/C/SL/SR: 150 Hz–20 kHz, +1 dB–3dBSW: 20 Hz–150 Hz, +1 dB–3dB (Crossover at 150 Hz)
Input Sensitivity and Impedance: 150 mV/ 47 kΩ (FL/FR)
Signal to Noise Ratio:105 dB (LINE1/LINE2, Direct mode, IHF-A)
Pioneer speaker:
--------------------
2 x 130mm Cone Woofer, 130mm Cone Midrange, 25mm Soft-dome Tweeter, 3-Way, Bass-reflex Floorstanding Type
Maximum Input Power 130W
Frequency Response 40Hz~20kHz
Sensitivity 87dB
Crossover 250Hz & 3kHz
Impedance 6ohms
I am planning to purchase a Floor standing speaker - Pioneer sp fs52, mainly to play music and a little bit of movies too. I already have a small Onkyo home theater system HTS-22HDX. Is it possible to connect the pioneer speaker to this Onkyo system without damaging either the speaker or receiver. Thanks and hoping for a quick response.
The specs are as below :
Onkyo receiver:
----------------------
Type:Bass-reflex with built-in amplifier
Rated Output Power(FTC):5 ch (FL/FR/C/SL/SR) × 25 W at 6 ohms, 1 kHz, 1ch driven, THD 1%1 ch (SW) × 47 W at 3 ohms, 100 Hz, 1ch driven, THD 1%
(IEC):5 ch (FL/FR/C/SL/SR) × 25 W at 6 ohms, 1 kHz, 1ch driven, THD 1%1 ch (SW) × 50 W at 3 ohms, 100 Hz, 1ch driven, THD 1%
Subwoofer Frequency Response: 35 Hz–200 Hz
Amp Frequency Response:FL/FR: 10 Hz–100 kHz (Direct mode)FL/FR/C/SL/SR: 150 Hz–20 kHz, +1 dB–3dBSW: 20 Hz–150 Hz, +1 dB–3dB (Crossover at 150 Hz)
Input Sensitivity and Impedance: 150 mV/ 47 kΩ (FL/FR)
Signal to Noise Ratio:105 dB (LINE1/LINE2, Direct mode, IHF-A)
Pioneer speaker:
--------------------
2 x 130mm Cone Woofer, 130mm Cone Midrange, 25mm Soft-dome Tweeter, 3-Way, Bass-reflex Floorstanding Type
Maximum Input Power 130W
Frequency Response 40Hz~20kHz
Sensitivity 87dB
Crossover 250Hz & 3kHz
Impedance 6ohms