Hi,
I would consider an opamp based balanced line driver/converter, which accepts unbalanced input and puts out balanced output. much better than any simple connector.
Regards,
Aniket
I need a small length only to connect inside the amplifier box, say 8 inches or so.
Can I use a good two core shielded cable?
One core carries signal while other core and shield are grounded. In that sense a single core cable should also do if the third point is grounded at the socket.
Sent from my ASUS_Z00AD using Tapatalk
Further, when using an op amp to go balanced, you are adding more circuitry to the signal which may not necessarily be a great thing.
I need a small length only to connect inside the amplifier box, say 8 inches or so.
Can I use a good two core shielded cable?
One core carries signal while other core and shield are grounded. In that sense a single core cable should also do if the third point is grounded at the socket.