Hi all,
I seem to be having a very particular problem. My system set up is as follows
AVR – Denon 8500H
TV (HDMI 1 Out) – LG C8 65
Projector (HDMI2 Out) – Epson 9400 W
Blue Ray Input – Panasonic UB820
DVD Input – Oppo 103
When both the HDMI outs to the TV and projector are connected, and even when the projector is in standby mode I get no signal to the TV. However if I pull out the hdmi cable to the projector, the signal comes back on the TV.
However in this configuration I get signal on the projector when it’s turned on.
When I switch the hdmi inputs, that is, connect projector to HDMI 1 and TV to HDMI 2 on the Denon receiver I get the signal from the Oppo but not the 4K Panasonic player on the TV. This problem goes away if I switch on the projector instead of the TV.
I connected both the Oppo and Panasonic directly to the TV and face no issues. Which means there is nothing wrong with both the players and the cables being used.
I did system reset on TV, and Denon but to no avail.
Can anyone tell me what could be the issue and how to rectify it?
Thanks.
I seem to be having a very particular problem. My system set up is as follows
AVR – Denon 8500H
TV (HDMI 1 Out) – LG C8 65
Projector (HDMI2 Out) – Epson 9400 W
Blue Ray Input – Panasonic UB820
DVD Input – Oppo 103
When both the HDMI outs to the TV and projector are connected, and even when the projector is in standby mode I get no signal to the TV. However if I pull out the hdmi cable to the projector, the signal comes back on the TV.
However in this configuration I get signal on the projector when it’s turned on.
When I switch the hdmi inputs, that is, connect projector to HDMI 1 and TV to HDMI 2 on the Denon receiver I get the signal from the Oppo but not the 4K Panasonic player on the TV. This problem goes away if I switch on the projector instead of the TV.
I connected both the Oppo and Panasonic directly to the TV and face no issues. Which means there is nothing wrong with both the players and the cables being used.
I did system reset on TV, and Denon but to no avail.
Can anyone tell me what could be the issue and how to rectify it?
Thanks.