Glue for speaker grill cloth

raghukanthjoshi

Active Member
Joined
Jun 4, 2013
Messages
109
Points
28
Location
hyderabad
need a suggestion my speaker grill cloth is peeling off which is on a metal frame any suggestion on adhesive to paste it.

Note: fevicol doesnt work, Fevikwik will leave a mark on the cloth.

Thanks
Raghu
 

Attachments

  • IMG_20211010_231006.jpg
    IMG_20211010_231006.jpg
    396.4 KB · Views: 32
  • IMG_20211010_230937.jpg
    IMG_20211010_230937.jpg
    318.6 KB · Views: 32
If the speaker cabinet is old in the 70s or later , there were no fevicol or other adhesive , only rubberized solution was used ,Dunlop is one brand used in those days
 
Use Fevibond, small quantity on both the frame and cloth, let it dry for 10 minutes then stick it together and keep something heavy atop to maintain the said pressure overnight for a perfect bond.
 
Is that metal part under the peeled cloth rusted? If yes dab some isopropyl alcohol or water on a cloth & clean the rusty part to remove any loose dirt. Then follow procedure mentioned by delhite2 for sticking with Fevibond.
 
Fevicol Heatx should solve this problem. Read the instructions on the container before applying
 
Is that metal part under the peeled cloth rusted? If yes dab some isopropyl alcohol or water on a cloth & clean the rusty part to remove any loose dirt. Then follow procedure mentioned by delhite2 for sticking with Fevibond.
sure thanks for the advice will follow and update fevibond is recommended by many would try
 
Join WhatsApp group to get HiFiMART.com Offers & Deals delivered to your smartphone!
Back
Top