rock130577
New Member
Hi
Please help me out.
I have Bose 301 Series V speakers with 150W rms and 4-8ohms.
Between the integrated amps Yamaha AX397 or Denon PMA 510AE, which one should I go for ? I can afford either.
The specs are as follows :
Yamaha AX397 :
Minimum RMS Output Power (8 ohms, 20 Hz20 kHz, 0.019% THD)60 W + 60 W
Minimum RMS Output Power (6 ohms, 20 Hz20 kHz, 0.038% THD)70 W + 70 W
Output Power (4 ohms, 1 kHz, 0.7 % THD)95 W + 95 W
Maximum Power (8 ohms, 1 kHz, 10% THD)100 W + 100 W
Dynamic Power (8/6/4/2 ohms)100 W/120 W/140 W/150 W
Damping Factor(8 ohms, 20 Hz-20 kHz)240 (speaker A)
Input Sensitivity/ImpedancePhono (MM)2.5 mV/47 k-ohmsCD195 mV/47 k-ohms
Frequency Response (CD Direct On)10 Hz-100 kHz 1 dB Total Harmonic Distortion (20 Hz20 kHz)Phono (MM) to Rec Out0.003% (3 V)CD to Sp Out0.009% (42.5 W/8 ohms)Signal-to-Noise Ratio (Input Shorted)Phono (MM) [Input Shorted 5 mV]88 dB CD [Input Shorted 195 mV]110 dB (CD Direct On))
Denon PMA 510AE :
Main Specifications
Power amplifier section
Rated output 45 W + 45 W
(8 ohms, 20 Hz - 20 kHz, THD 0.07%)
70 W + 70 W
(4 ohms, 1 kHz, THD 0.7%)
Total harmonic distortion 0.02% (8ohms, 1 kHz)
Preamplifier section
Phono equalizer rated output 150 mV (REC out terminal)
Input sensitivity / Impedance
Line 100 mV/47 kohms (Source Direct: OFF)
100 mV/16 kohms (Source Direct: ON)
Phono 2.5 mV/47 kohms
RIAA deviation
Phono 20 Hz - 20 kHz, 0.5 dB
Signal-to-noise ratio (IHF A network)
Line 105 dB (Source Direct: ON)
Phono (MM) 84 dB
(input terminals shorted, input signal 5 mV)
Tone controls
Bass 100 Hz, 8 dB
Treble 10 kHz, 8 dB
Please help me out.
I have Bose 301 Series V speakers with 150W rms and 4-8ohms.
Between the integrated amps Yamaha AX397 or Denon PMA 510AE, which one should I go for ? I can afford either.
The specs are as follows :
Yamaha AX397 :
Minimum RMS Output Power (8 ohms, 20 Hz20 kHz, 0.019% THD)60 W + 60 W
Minimum RMS Output Power (6 ohms, 20 Hz20 kHz, 0.038% THD)70 W + 70 W
Output Power (4 ohms, 1 kHz, 0.7 % THD)95 W + 95 W
Maximum Power (8 ohms, 1 kHz, 10% THD)100 W + 100 W
Dynamic Power (8/6/4/2 ohms)100 W/120 W/140 W/150 W
Damping Factor(8 ohms, 20 Hz-20 kHz)240 (speaker A)
Input Sensitivity/ImpedancePhono (MM)2.5 mV/47 k-ohmsCD195 mV/47 k-ohms
Frequency Response (CD Direct On)10 Hz-100 kHz 1 dB Total Harmonic Distortion (20 Hz20 kHz)Phono (MM) to Rec Out0.003% (3 V)CD to Sp Out0.009% (42.5 W/8 ohms)Signal-to-Noise Ratio (Input Shorted)Phono (MM) [Input Shorted 5 mV]88 dB CD [Input Shorted 195 mV]110 dB (CD Direct On))
Denon PMA 510AE :
Main Specifications
Power amplifier section
Rated output 45 W + 45 W
(8 ohms, 20 Hz - 20 kHz, THD 0.07%)
70 W + 70 W
(4 ohms, 1 kHz, THD 0.7%)
Total harmonic distortion 0.02% (8ohms, 1 kHz)
Preamplifier section
Phono equalizer rated output 150 mV (REC out terminal)
Input sensitivity / Impedance
Line 100 mV/47 kohms (Source Direct: OFF)
100 mV/16 kohms (Source Direct: ON)
Phono 2.5 mV/47 kohms
RIAA deviation
Phono 20 Hz - 20 kHz, 0.5 dB
Signal-to-noise ratio (IHF A network)
Line 105 dB (Source Direct: ON)
Phono (MM) 84 dB
(input terminals shorted, input signal 5 mV)
Tone controls
Bass 100 Hz, 8 dB
Treble 10 kHz, 8 dB