Hi Guys ,
What a great community this is. I just need a small help , I have a set of Z5500 speakers with the below specifications. I find the Center Channel underpowered or non punchy of handling DTS/Dolby Digital sound in Blu Ray Movies.
I am in a big dilemma if I should replace the set (Have 40K budget) or should get a new center channel speaker (Third Party) for Z5500.
Can anyone please advise with examples and options for the same for solving my problem please
Z5500 Specifications:
Total FTC power: 505 watts RMS
Sub-woofer: 188 watts RMS (into 8 ohms, @ 100Hz, @ 10% THD)
Satellites:
Left/Right: 62 watts RMS x 2 (into 8 ohms, @ 1khz, @ 10% THD)
Center: 69 watts RMS (into 8 ohms, @ 1kHz, @ 10% THD)
Rear Left & Right: 62 watts RMS x 2 (into 8 ohms, @ 1kHz, @ 10% THD)
Total Peak power: 1010 watts
Maximum SPL: >115 dB
Frequency response: 33 Hz 20 kHz
Amplifier: Ultra-linear, high-capacity analog
Signal to noise ratio: >93.5 dB, typical 100
Input impedance: 8,000 ohms
What a great community this is. I just need a small help , I have a set of Z5500 speakers with the below specifications. I find the Center Channel underpowered or non punchy of handling DTS/Dolby Digital sound in Blu Ray Movies.
I am in a big dilemma if I should replace the set (Have 40K budget) or should get a new center channel speaker (Third Party) for Z5500.
Can anyone please advise with examples and options for the same for solving my problem please
Z5500 Specifications:
Total FTC power: 505 watts RMS
Sub-woofer: 188 watts RMS (into 8 ohms, @ 100Hz, @ 10% THD)
Satellites:
Left/Right: 62 watts RMS x 2 (into 8 ohms, @ 1khz, @ 10% THD)
Center: 69 watts RMS (into 8 ohms, @ 1kHz, @ 10% THD)
Rear Left & Right: 62 watts RMS x 2 (into 8 ohms, @ 1kHz, @ 10% THD)
Total Peak power: 1010 watts
Maximum SPL: >115 dB
Frequency response: 33 Hz 20 kHz
Amplifier: Ultra-linear, high-capacity analog
Signal to noise ratio: >93.5 dB, typical 100
Input impedance: 8,000 ohms
Last edited:
