Check Sonodyne speakers (Sonos series FS).Would like to know whether we can get decent 3 no's of 3 ways LCR speakers for Rs 1 lakh ?
Azure OW-80 ... specs are good... what about the quality ?Taga Harmony has a few models
Platinum LCR-60 SL
TAV OW-60
These would be around 20,000 each
AZURE OW-80
This would be around 30-35,000 each
I don't know but it's a 4 ohm speaker. People get worried to go from even 8 to 6 ohm... is it advisable to go with 4 ohms ?If u r a fan of On wall then u can get Jamo D500 LCR,am using them and they r brilliant
Yes..slightly above or 1lakhWould like to know whether we can get decent 3 no's of 3 ways LCR speakers for Rs 1 lakh ?
Most manufacturers play with impedance ratings - the impedance of every speaker varies with frequency and usually goes down to 4 ohms at some frequency. Most AVRs these days come capable of driving 4 ohm loads or higher current. Which AVR are you using?I don't know but it's a 4 ohm speaker. People get worried to go from even 8 to 6 ohm... is it advisable to go with 4 ohms ?
Am using Denonx3600,never clipped. I always keep the setting at 8ohms in AVR and Eco mode Off.even at -5db it never shut down.ven 8 to 6 ohm... is it advisable to go with 4 ohms
Is there any difference between Concept centre and 3090C ? Can we use Concept center with 3050 towers ?Yes..slightly above or 1lakh
Concept 40s -80k
Concept center 26k but should be negotiable
I have Denon X2700H. What is clipping brother ? And what is -5dB and not shut off ? Sorry I haven't opened my AVR yet... could you please explain?Am using Denonx3600,never clipped. I always keep the setting at 8ohms in AVR and Eco mode Off.even at -5db it never shut down.
Denon X2700HMost manufacturers play with impedance ratings - the impedance of every speaker varies with frequency and usually goes down to 4 ohms at some frequency. Most AVRs these days come capable of driving 4 ohm loads or higher current. Which AVR are you using?
Most 8 ohm speakers are actually 4 ohm speakers.I don't know but it's a 4 ohm speaker. People get worried to go from even 8 to 6 ohm... is it advisable to go with 4 ohms ?
I'd recommend sticking to the 3090ci as it's tonality is consistent with the 3050i towers.Is there any difference between Concept centre and 3090C ? Can we use Concept center with 3050 towers ?
Got QA 3000 series HTib setup(3050, 3090c, 3020)! Connected only towers for now. Need Suggestion for a Sub. i would like to have a decent sub not earth shattering one. I recently experienced one of the SUBs from Klipsh. it's a 10 inch 200 watt rms class-D amp costing around 65-70k i guess. at 25% of the gain it was shaking the entire room.. Don't want this kind of one. need a softer sub.. any suggestions please!I'd recommend sticking to the 3090ci as it's tonality is consistent with the 3050i towers.
The concept center sounds quite different to the 3050i and will lead to an inconsistent surround sound experience i.e. when the sound travels from the center to the L/R channels, it'll sound different and detract from the immersion.
For a softer, musical sub - do check out Q acoustics QB12, it has reduced a lot in price recently and I saw it somewhere for around 40K odd. Not saying it is the best out there, but it is a pretty easy sub to integrate in our less than ideal roomsGot QA 3000 series HTib setup(3050, 3090c, 3020)! Connected only towers for now. Need Suggestion for a Sub. i would like to have a decent sub not earth shattering one. I recently experienced one of the SUBs from Klipsh. it's a 10 inch 200 watt rms class-D amp costing around 65-70k i guess. at 25% of the gain it was shaking the entire room.. Don't want this kind of one. need a softer sub.. any suggestions please!