All,
I am on my way for creating my first DIY 3WAY FS with Peerless India drivers. The process of build had been initiated from last week Nov/12. Purchased the drivers from Mumbai and rest materials been procured from our own diyaudiocart. Thanks to Bibin for helping me in all the way throughout the process of acquiring the drivers to selecting each and every components/items required for the FS project.
I went with 24mm MDF (Bajaj Make) with double baffle on front side. The height of the towers is 48" without the base stand. Width is 13.1" and depth is 16.1". Seems to be in process of making a monster.
The drivers are as follow
Woofer
Peerless - 10" Paper Cone Woofer - SB25NP
Mid
Peerless - 5.25" Coated Paper Cone Woofer - M13NH
Tweeter
Peerless - 25mm Silk DomeTweeter - TL25SN
And for the X-over I am going ahead with 2nd-Order Constant Power (CPC) which I had created using x-over pro 6. But still am on look out for the polypropylene capacitors. Still wondering whether I will be able to get it. Even with element14 seems very difficult. But with parts-express everything is available.
So coming to the cut off frequency, after going through all the blogs and expert advice I have concluded as 250 for Low and 3000 for High. If anybody differs on this please let me know. Also ordered the ready available x-over from diyaudiocart.
Will be buying the foam today evening or tomorrow, got the polyfill from one pillow maker who has the polyfill (believe so) used to make the recron pillows.
The hardest part for this project which I faced and still facing is the Carpenter punctuality and the deliver speed of DTDC, which is preferred buy most of the vendors, online suppliers
All the shipment reached Pune within stipulated timings and from Pune to Pimpri and to my place it took from 6 to 10 days for deliver..
on the enclosure front, I had received the deliver from carpenter today and the condition is work still in progress. The front flush mount cutting, I had advised to do it at my place only so maybe he will be turning up on xyz date.
Attached some pics for the FS -- https://plus.google.com/photos/116027126403584743674/albums/5842530479749223217/5842530485805029922
I am on my way for creating my first DIY 3WAY FS with Peerless India drivers. The process of build had been initiated from last week Nov/12. Purchased the drivers from Mumbai and rest materials been procured from our own diyaudiocart. Thanks to Bibin for helping me in all the way throughout the process of acquiring the drivers to selecting each and every components/items required for the FS project.
I went with 24mm MDF (Bajaj Make) with double baffle on front side. The height of the towers is 48" without the base stand. Width is 13.1" and depth is 16.1". Seems to be in process of making a monster.
The drivers are as follow
Woofer
Peerless - 10" Paper Cone Woofer - SB25NP
Mid
Peerless - 5.25" Coated Paper Cone Woofer - M13NH
Tweeter
Peerless - 25mm Silk DomeTweeter - TL25SN
And for the X-over I am going ahead with 2nd-Order Constant Power (CPC) which I had created using x-over pro 6. But still am on look out for the polypropylene capacitors. Still wondering whether I will be able to get it. Even with element14 seems very difficult. But with parts-express everything is available.
So coming to the cut off frequency, after going through all the blogs and expert advice I have concluded as 250 for Low and 3000 for High. If anybody differs on this please let me know. Also ordered the ready available x-over from diyaudiocart.
Will be buying the foam today evening or tomorrow, got the polyfill from one pillow maker who has the polyfill (believe so) used to make the recron pillows.
The hardest part for this project which I faced and still facing is the Carpenter punctuality and the deliver speed of DTDC, which is preferred buy most of the vendors, online suppliers
All the shipment reached Pune within stipulated timings and from Pune to Pimpri and to my place it took from 6 to 10 days for deliver..
on the enclosure front, I had received the deliver from carpenter today and the condition is work still in progress. The front flush mount cutting, I had advised to do it at my place only so maybe he will be turning up on xyz date.
Attached some pics for the FS -- https://plus.google.com/photos/116027126403584743674/albums/5842530479749223217/5842530485805029922
Last edited:
