• Hello and Welcome to HiFiVision.com - an online community for the home entertainment and tech enthusiasts!

    If you would like to ask a question, participate in a discussion and view attachments please Register yourself.

No display on avr

Wharfedale Diamond 225

jayantadak

Member
Joined
Jan 29, 2008
Messages
178
Points
18
Location
Mumbai
I have the Pioneer BDP 170. I have connected to AVR Denon X-2000. I wanted to know how you get the display of DOLBY TRUE HD and DTS HD MA display on the AVR panel when you play blu ray discs of DD TRUE HD & DTS HD MA.

When I play the discs of DD TRUE HD & DTS HD MA, but still I do not get the display of the same on the AVR. I get only display of DOLOBY DIGITAL and DTS respectively.

Please let me know if there is any setting to be done in the AVR or in the Pioneer BDP. I have set the audio output to 'Bitstream' and HDMI audio out also to 'Bitstream' in the Pioneer BDP.
 
SPONSORED ADS
Last edited:

SPONSORED ADS

jayantadak

Member
Joined
Jan 29, 2008
Messages
178
Points
18
Location
Mumbai
@spiro,

No, there is no DSP on the Denon X-2000. I remember quiet well, I had seen the display on the panel some 2/3 months ago,while playing the disc, I wonder how come it disappeared. In the past two days, just to rule out the HDMI issue if any, I had plugged out the HDMI cords from both the ends ( AVR and BDP) and plugged in again, but in vain. I also tried all combinations of the PCM - BITSTREAM on the 'digital audio out put' / 'HDMI audio out' section on the Pioneer BDP-170. I guess it is more of the BDP setting issue than the AVR. See if you can guess. Rgds.
 
Last edited:

mshifi

Active Member
Joined
Nov 6, 2012
Messages
779
Points
43
Location
hyderabad
Just crossed checked playing a blueray disc through Sony bd player there is no display on the avr while I play a blueray disc through my oppo player the hd display appears on he avr. Guess this must be issue with the bd player.
 
SPONSORED ADS

Top