SoundFoundations - New Speaker Stand series inspired by DynaAudio

magma

Well-Known Member
Joined
Dec 6, 2008
Messages
2,662
Points
113
Location
Mumbai
Hi all

im posting on the forum after really long ( probably my mind was "locked down "

Anyway the 1st lockdown gave me time to think about a new series based on Aluminum extruded columns which are internally braced and divided into seperate compartments ( one for sand filling and the smaller one for cable mgt )
This was inspired by a dynaudio stand i setup at a clients home

we designed an oval extrusion - 4.5 mm thick (which is twice that of the one it was inspired from )
The idea was simplicity and a minimalist look
The oval was then split 3/4th and 1/4 th for the above mentioned reasons

we used this column in the entire series
ONYX
TOPAZ
GARNET

models

the TOPAZ was inspired by the dynaudio stand 10
however we expanded the top plate to 8 by 10 inch instead of the 6 by 7 offered by them
We also doubled the weight from 3.2kg in the original to 7.0 kg in the topaz

A change was made in the column though we picked an oval rather than a trapezium

Topaz-1.jpg
topaz-speaker-stand-2.jpg


The GARNET speaker stand
was inspired by dynaudios top end stand - the stand 6

these featured 3 layer CLD sandwich top and bottom plates
an enlarged top plate to match the base and also useful for those speaker that curve towards the rear
again here we enlarged the top plate to suit most speakers and Also doubled the weight as compared to the Dynes

Garnet-1.jpg


The last from the series was the ONYX with a more simplistic and milimalist design
Pictures Courtesy a fellow member



WhatsApp Image 2021-05-15 at 12.03.00 PM.jpeg

WhatsApp Image 2021-05-15 at 12.03.00 PM (1).jpeg


We realised that most have tiles floors and hence spike feet became standard in this series


Hope you guys continue to like our work
we continue to be inspired and encouraged from this forum
 
Hi all

im posting on the forum after really long ( probably my mind was "locked down "

Anyway the 1st lockdown gave me time to think about a new series based on Aluminum extruded columns which are internally braced and divided into seperate compartments ( one for sand filling and the smaller one for cable mgt )
This was inspired by a dynaudio stand i setup at a clients home

we designed an oval extrusion - 4.5 mm thick (which is twice that of the one it was inspired from )
The idea was simplicity and a minimalist look
The oval was then split 3/4th and 1/4 th for the above mentioned reasons

we used this column in the entire series
ONYX
TOPAZ
GARNET

models

the TOPAZ was inspired by the dynaudio stand 10
however we expanded the top plate to 8 by 10 inch instead of the 6 by 7 offered by them
We also doubled the weight from 3.2kg in the original to 7.0 kg in the topaz

A change was made in the column though we picked an oval rather than a trapezium

View attachment 57093
View attachment 57094


The GARNET speaker stand
was inspired by dynaudios top end stand - the stand 6

these featured 3 layer CLD sandwich top and bottom plates
an enlarged top plate to match the base and also useful for those speaker that curve towards the rear
again here we enlarged the top plate to suit most speakers and Also doubled the weight as compared to the Dynes

View attachment 57095


The last from the series was the ONYX with a more simplistic and milimalist design
Pictures Courtesy a fellow member



View attachment 57096

View attachment 57097


We realised that most have tiles floors and hence spike feet became standard in this series


Hope you guys continue to like our work
we continue to be inspired and encouraged from this forum
The White Stand is a Complete 'Drool Maal'
Thanks for sharing...
 
Order your Rega Turntables & Amplifiers from HiFiMART.com - India's reputed online dealer.
Back
Top