Aluminium enclosures

[Shivam]

Where can I buy aluminium enclosures for various components online? I am not interested in importing from outside India.

 

[jls001]

Silicon Ray, Hong Kong

Edit: I read it as "interested in importing from outside". My mistake.

Magma could be your best bet.

 

[mpw]

does ali make them ? if i understand right..

mpw

 

[k_vijay12]

Yuan Jing Audio - Aluminium Case / Chassis

 

[Aniket]

Welcome To SPM Perfection

They custom build also.


Regards,
Aniket

 

[linuxguru]

FWIW, here's an aluminium and wood amplifier cabinet fabricated entirely with local supplies and through a local machine shop. It was expensive, and took a lot of time to wet-sand and finish it to satisfactory standard, but I learned enough from the exercise to be able to do it better at lower cost in future iterations if needed.

 

[kanwar]

Nice enclosure linuxguru,

Which type of wood is used in front panel?

 

[bibin3210]

I am in the process of making few all aluminium (4mm) cabinets with the following dimension.

W: 21"
D: 18"
H: 6"

Thanks,
Bibin

 

[Shivam]

I am in the process of making few all aluminium (4mm) cabinets with the following dimension.

W: 21"
D: 18"
H: 6"

Thanks,
Bibin

Can you provide more details about your cabinets and photos ?

 

[kanwar]

Bibin,

I also need an aluminum cabinet full of mangoes from you.

 

[bibin3210]

Can you provide more details about your cabinets and photos ?

Photos are not available at this point. Design is ready and going to do a prototype with CR sheet.

Thanks,
Bibin

 

[bibin3210]

Bibin,

I also need an aluminum cabinet full of mangoes from you.

Sure.....

Thanks,
Bibin

 

[bibin3210]

Currently working on a cabinet for ODAC and O2. All wood (Teak), 6x4 in dimension using a single block of wood. I will try to complete it this weekend and start working on the aluminium cabinet prototyping.

Thanks,
Bibin

 

[linuxguru]

Nice enclosure linuxguru,

Which type of wood is used in front panel?

Thanks, I believe it is the Indian Kino, also known as Vijayasar, Narra, etc. It belongs to the Padauk family of hardwoods, of which the rarest and most expensive is Red Sanders, found only in a few locations in AP. OTOH, Kino is readily available and not endangered. IMHO, old-growth Kino has better and more beautiful grain than Rosewood/Teak/Sal/Sisam and other classic hardwoods.

 

[diesel engine]

I am in the process of making few all aluminium (4mm) cabinets with the following dimension.

W: 21"
D: 18"
H: 6"

Thanks,
Bibin

Do you know any place in Kochi where this 4mm aliminium sheets ate available?

 

[bibin3210]

Do you know any place in Kochi where this 4mm aliminium sheets ate available?

4mm flats are available here not sheet. I am sourcing it from Coimbatore.