Dayton Ultimax 12" Sub-Woofer - Build

bijinmb

Well-Known Member
Joined
May 1, 2012
Messages
239
Points
93
Location
Cochin
Amigo,

I was behind a Sub-Woofer build using Dayton Ultimax 12" driver for the past few weeks.

Got time to complete that last week and its ready to take off now.

The driver construction of Ultimax is quiet sturdy and build quality is very good.

URL: Dayton Audio UM12-22 12" Ultimax DVC Subwoofer 2 ohm Per Coil - Ultimax Series - Loudspeaker Drivers By Series - Loudspeaker Components

The Dayton 1KW Plate AMP (SPA1000) is too powerful to take any domestic challenge IMO.

URL: Dayton Audio SPA1000 1000W Subwoofer Plate Amplifier - Subwoofer Plate Amps - Loudspeaker Components

The plate amp has good features to tweak the driver in all means.

Cabinet volume is approximately: 5.6 Cubic feet vented type.

Front Battle: 1.5" MDF

The cabinet is braced internally to reduce the resonance and the inside wall is damped with bitumen sheet ->12mm Foam ->3mm Woolen Felt (Kinda new experiment this time, which worked out very well).

The driver takes considerable time to break-in i guess. The Bass is soft and really a room shaker! To my surprise all the windows are jerking after raising the level up to its 60+. Even can see tube lights dimming slightly on drum kicks!


Just thought of sharing few images of the build process below.

Dayton UM12-22 12" Ultimax DVC Subwoofer 2 ohm Per Coil - Driver





Dayton - SPA1000 1000W Subwoofer Plate Amplifier:





Cabinet Construction:

















Paint Job - Satin Black over several layers of surfacer coating:









Attaching the Cabinet Footer:



Finished Sub-Woofer:













 
Last edited:
excellent build,very fine effort.i hope the sound quality is also excellent.
is the plate amp is 120 or 240volts operated.
how the sound compared to your previous subs.
finishing is top notch.
 
Bijinmb Subwoofer Specialist Private Limited (BSSPL) :) New company floated in hifi vision.

What a finish! Congrats. Gorgeous looking.
 
Super finish. Is it wood veneer or vinyl veneer? Congrats on a terrific build. The milling machine seems to be doing a great service to you guys....
 
Super finish. Is it wood veneer or vinyl veneer? Congrats on a terrific build. The milling machine seems to be doing a great service to you guys....

Thanks Anilva, That is vinyl veneer, Yeah the CNC Router is really doing a great service...
 
Congrats and very good finish. What are you pairing the sub with and would appreciate a review. Is it for music or HT !!!

Good to see this driver and plate amp in this part of the world.

Cheers and good luck.
 
Congrats and very good finish. What are you pairing the sub with and would appreciate a review. Is it for music or HT !!!

Good to see this driver and plate amp in this part of the world.

Cheers and good luck.

Mano,

It has reached Chennai yesterday. It is for a HT.


Thanks,
Bibin
 
Back
Top