.... All 3D projectors use active 3D technology and it needs to be verified whether the active 3D glasses that work with TV will also work with PJ. I believe that they logically they should but who knows? ...
There is no common standards established yet for 3D display/glasses format - it would take some more time to settle down among the various vendors, if at all...
However, currently we can see the 3d evolution starting from Analglyphs, to signalling based wired/wireless on IR, Bluetooth and DLP-Link based options. This is based on the technology aspect. Now assuming even if two vendors use the same technology (eg IR) the signalling codes used by them should also match for the glasses to be interchangeable / usable.
Given the above situation, its highly unlikely that, in general, the 3D glasses from one Vendor are compatible with another..
The only bright option on the horizon currently seems to be the DLP Link based tech. This is based on the DLP Chip itself and hence more or less independent of any vendor implementation/customization. Thus it would be a safe bet to assume any DLP-Link 3D glass will work with any DLP-Link enabled device irrespective of the vendor.
Also as the hardwork of implementing this type of 3D is in the DLP chip or display itself, the 3D glasses are much simpler, lighweight and hence more affordable.
I think the best option for 3D as of now is to go with the following:
1. Any display (TV/pj/Monitor) that can support 120Hz refresh at decent enough resolution
2. DLP Link 3D glasses.
3. If the display itself dosent support 3D decoding, then the display can be driven with a basic 3d graphics card driving the display at 120hz on a HTPC/Laptop + s/w to decode the 3d files
The above would be a decent starting point and as close to the 'theater effect' as possible...
I would also like to hear if anybody has a better option for 3d as of now..