full hd mitsibushi hc 4000 with coopa hd media player

[abhirag]

dear all
I have attached coopa media player with normal hdmi cable 10m length 1500rs with mitsibushi hc4000 full hd projector.
Player and projector is working properly when selected to 1080i but if i tried to select 1080p on my player picture doesnot remain stable keep going and coming.if selected back to 1080i it works properly.
Help me out friends about this whether its a problem with cable. Player or projecter.
Regards

 

[baijuxavior]

Use a short cable and test the video. If it works fine then the problem is with the cable. For large distances good quality cable is essential.

 

[koushik]

You ure Coopa player? That's interesting. I thought I am the only human using this brand
Now regarding your problem, as mentioned by Baijuxavior, try a different cable. A better one as 10m is quite long.

 

[mdharan]

Hello members!
Iam also one the User of Bluetimes Coopa MP....
Regarding the problem i also suggest the same.

Murali.

 

[projectorguru99]

i agree with baiju that 10m or above u need good HDMI cable . Try with Small length cable and revert or buy a good quality cable of 10m

 

[KalyanVizag]

Also I remember seeing that some cables only support 1080i and dont support 1080p. Could that be the case? I remember seeing it on one model of MX 10 meter HDMI cable pack.

 

[abhirag]

Thanx,you are right,I tried with small cable it worked.So I am going for good brand cable.
Facing another problem with UPS.My Mitsubishi HC4000 is not working on offline UPS of 800 va.I tred 3 different brands of diff. wattage.It got tripped during powercut.
Suggest me wat to do.
regards

 

[msk2013]

Thanx,you are right,I tried with small cable it worked.So I am going for good brand cable.
Facing another problem with UPS.My Mitsubishi HC4000 is not working on offline UPS of 800 va.I tred 3 different brands of diff. wattage.It got tripped during powercut.
Suggest me wat to do.
regards

somewhere in the forum threads(audo video components section) I read that the offlineUPS changeover to battery is 21 ms approx and for onlineUPS it is much shorter ie approx 8 ms.

Probably your HC 4000 might be switching off faster than 21 ms.