Help me to choose between these MEGA MONSTERS!!!

This thread is not only informative ,but images are really a eye treat.
Thanks for writing in so much detail.
 
The images are great which let us visualize what has been written. These posts are not casual posts and makes 100% utilization of the brain while reading.;) So it really helps with those images. Also these uber avrs are so beautifull to look and asthetically pleasing, my sr6009 seems like a black box sitting beside it.

This thread is not only informative ,but images are really a eye treat.
 
You are truly the /GURU/ of avrs. By reading your posts not only do I come to know more about how avr works and sounds but i salute for the effort you pour in to write such aweome posts in a lucid way to teach novices like us. Because there are great many people who knows about all this but retaliate from the effort posting sharing this /RISHI/ gyaan to us. You posts have greatly inspired me with the determination to get a z9 and i enjoy every momoent with it. So a big thank you once more and keep posting.

Thanks for writing in so much detail.

Thank you so much for the appreciation. :)

This thread is not only informative ,but images are really a eye treat.

The images are great which let us visualize what has been written. These posts are not casual posts and makes 100% utilization of the brain while reading.;) So it really helps with those images.

I do try to attach images related to the topic of the post in order to.. as you said .. visualize. You can write a hundred lines without graphic illustrations, but the reader gets lost in those words. In the end it is those images that stay in the readers mind, not those words.
 
Are the 3rd gen ubers any better than 2nd gen? You said earlier z11 was no match for z9's sound and power so was it just an new avr with hdmi and same dsp? I also find looking at the images of onkyo nr1000 having hdmi, si it is a 3rd gen or 2nd gen?

Ubers: 3rd Gen

These HDMI capable Uber AV amplifiers like Yamaha DSP-Z11 or Denon AVC-A1HDA performed identical 96 kHz/24-bit DSP signal processing from the incoming HDMI signal as there was no need to go any higher with regards to Dolby TrueHD/ DTS-HD MA.
 
Last edited:
Are the 3rd gen ubers any better than 2nd gen?

It depends. Do you want an AV amplifier with HDMI 1.3a for internal audio decoding of BD audio tracks, 1080p video up-conversion facility, networking capabilities, internet radio, music from PC, music from USB stick, support for iPod dock all supplemented by outstanding sound quality & power output by any Home theater standards? Then 3rd Gen Ubers are for you as it is an AV amplifier more versatile than you can think of. A rather smart choice for Home Theater (HT) guys.

You are hedonistic. You want supreme audio fidelity which betters 3rd Gen Ubers by a margin and rivals that of un-compromised HiFi pedigree of high-end stereo amplifiers supplemented with enough power to make a trip to the moon :), then 2nd Gen Ubers are for you. A smart choice for those guys who craves stereo/ multi-channel HiFi setup. With these AV amplifiers be ready to take the pain of connecting 7.1 analog inputs from BD players being later rewarded with better sound quality and more power than 3rd Gen had in offer. A great option for those whose heart is mainly in music, HT being the second choice. Palsy 720p/1080i video up-conversion facility via component-outs.

Left to Right: Denon AVC-A1HDA vs Yamaha DSP-Z11 [3rd Gen "Ubers"]

515460.jpg


Yamaha DSP-Z11 [3rd Gen]

ve66h5.jpg


Denon AVC-A1HDA [3rd Gen]

14n02ur.jpg


You first need to understand the reason behind new AV amplifier/ AVR releases. The AV industry is constantly evolving with new HT audio formats pouring in now and then, the demand from customers was and still is to always live up to them. So these AV amplifiers were strictly audio/video devices at first supporting the HT audio formats from Dolby & DTS. With time needs got evolved and the current trend is to merge these AV devices with as much functionality as possible apart from audio/video like additional networking capabilities, compatibility with mobile devices etc making them more of a networking & connectivity device with audio/video capability rather than the other way round. So the amount of effort these AV manufactures used to put for audio fidelity had reduced over time and more energy are now spent on additional connectivity/ networking features making them more of a gadget and less of an AV amplifier. This is either good or bad depending on the type of user and his/her intended use.

The AV manufactures with their top-of-the-line-series [TOTLS] always tries to capture the latest and greatest of the industry. Say in 1998 Dolby came up with Dolby Digital EX, a newer 6.1 channel HT audio format and bingo we had Yamaha DSP-AX1 in 1999. So Yamaha responded to HT industrys newest format and upgraded their existing Yamaha DSP-A1 with an additional sixth audio channel to bear the 6.1 channel output. A year later DTS responded with DTS EX so this support was then included in 2001, now with DSP-AZ1. After that came a long lull for HT audio decoding formats for next five years until HDMI spec 1.3 got introduced to support Dolby TrueHD and DTS HD MA in 2006.

With the HT industry being quite settled in 2001 two new audio formats arrived, namely DVD-A & SACD. These stereo/ multi-channel audio formats had nothing to do with HT but were primarily aimed on improving the audio fidelity by nth degree over regular CD. This was when 1st & 2nd Gen Ubers were born. The 2nd Gens were the most refined versions with i.Link support with complete over-haul of their digital audio boards with the single aim to vitalize on the increased audio quality provided by these formats. AV amplifier manufacturers for the first time had their focus completely set on improving audio fidelity, concentrating all their efforts on making an audio amplifier first, worthy of HiFI pedigree, later adding the support for industry standard HT audio. This led the AV manufacturers in using completely new radical technical designs and solutions for their AV amplifiers containing some of the best & most expensive hardware available in the market thus inflating the price almost two times their predecessors. This was when high end marks like Lexicon finally decided its time to make AV amplifiers worthy of HiFi pedigree as the market was ready for it. This was when Denon AVC-A1SRA, Pioneer VSA-AX10Ai-S, Onkyo TX-NR1000, Lexicon RV-8 and Yamaha DSP-Z9 were born. So they were quite special when it comes to sound quality as it was their first design priority.

Lexicon RV-8

adiyqp.jpg


2m03k8.jpg


With Dolby TrueHD and DTS HD MA being supported over HDMI 1.3 in 2006, the AV industries focus once again maneuvered from pure audio fidelity to support for these latest and greatest HT decoding formats over HDMI. It was a brand new technology which needed a lot of investment to work properly. So the 3rd Gen Ubers were born with the primary aim to introduce up-scaled 1080p video over HDMI along with full support for Dolby TrueHD and DTS HD MA audio decoding. Various additional support for networking and plug and play mobile devices were also included as the AV market was in need of it, audio fidelity playing a second fiddle. This is when Yamaha DSP-Z11, Lexicon RV-5 & Denon AVC-A1HDA was born.

Denon AVC-A1HDA

15843mb.jpg


Lexicon RV-5

141o6tj.jpg


qod7xj.jpg


Here I am not discriminating 3rd Gens audio fidelity by any means; they possessed exceptionally detailed sound by any AV amplifier standards but still fall a little short to 2nd Gen. I have heard the DSP-Z9 & DSP-Z11 for a day with the same setup, and every time DSP-Z9 was the winner in this aspect. The reason I believe was hardware cost. Let us take the example of DSP-Z9 & DSP-Z11. With Sony buying each and every single HDMI 1.3 chipset available in the market for their Playstation3 didnt help the AV manufacturers at all and this scarcity caused soaring HDMI chipset price. The US $4,500 DSP-Z9 inflation adjusted will cost US $5,000 in mid 2007, when DSP-Z11 got released with a price tag of US $5,500. With a price difference of just five hundred US dollars and in having HDMI 1.3 support, HDMI 1.3 chipsets being prohibitively expensive at those times the rest of the hardware in DSP-Z11 took a major hit. The power amp & power supply sections got bogged down, followed by use of less expensive audio components and design patterns in comparison to DSP-Z9. Gone were the highly complex octa-chambered chassis of DSP-Z9 and in came a simpler quad-chambered chassis. Gone was Made in Japan and in came Made in Malaysia to reduce manufacturing costs.

You said earlier z11 was no match for z9's sound and power so was it just an new avr with hdmi and same dsp?

Everything is there for a reason. And there were reasons why Ubers like DSP-Z9 & DSP-Z11 were born. Yamaha DSP-Z9 was designed for Pure Audio Fidelity in order to realize the supreme audio fidelity contained in DVD-A and SACD audio formats. It was the primary need at those times. So what led to the birth of DSP-Z11?

Yamaha DSP-Z9 vs Yamaha DSP-Z11

30jp9nr.jpg


To understand this lets hark back to 1986, the year in which Yamaha DSP-1 was introduced. A revolutionary processor of early home theater surround sound equipment and the first in the world to be sold for processing digital signals using Yamahas own Digital Sound Field Processing technology. It was also the first consumer product ever to support Dolby Surround where a three channel sound (Left, Right and Rear) were created from a matrix-encoded analog stereo input. It left Yamahas competitors scratching their heads unable to understand the complex technology & how Yamaha was able to release such a consumer model. Some twenty years down the line in 2006 marked the 20th anniversary of Yamahas Digital Sound Field Processing or Yamaha DSP technology from their very first use in DSP-1, and they wanted to commemorate this leadership achievement with a new Uber AV amplifier specifically designed for their DSP processing. Yamaha DSP-Z11 was born in 2007.

Yamaha DSP-1

wbrjb8.jpg


Yamaha DSP-Z11

2rz74sl.jpg


Exploded View

1693sk3.jpg


CINEMA DSP HD CUBE

15zfoes.jpg


In 2001, Yamaha had CINEMA DSP with DSP-AZ1. Later with the introduction of Uber DSP-Z9 in 2004, Yamaha was able to triple their DSP computational power at twice the sampling frequency resulting in six times denser DSP capacity. Yamaha called this high definition version as CINEMA DSP HD and was the leader in this field. DSP-Z11 could have well lived with CINEMA DSP HD as their competitors was still catching up in this arena, but the reason for its very existence was to be the reference as to what Yamaha could achieve with their DSP technology. Hence they again doubled the computational power of their DSP microcomputers over DSP-Z9 at same sampling frequency of 96 kHz, resulting in two times denser DSP capacity over DSP-Z9. Yamaha called this ultra high definition version as CINEMA DSP HD CUBIC as implemented in DSP-Z11, requiring two front and two back presence audio channels along with the regular 7.1 channel setup. So in short span of six years, twelve times denser DSP capacity was obtained over DSP-AZ1. Just think of it for a while. I still wonder if Yamaha ever implemented this level of DSP computational power as achieved by DSP-Z11 in any of its successive AV amplifier models which in the first place were not Ubers after all. I doubt that. This is the reason why after auditioning both, I found in movies DSP-Z9 may had more power and slam, but DSP-Z11 had a slightly more focused imaging, feeling a bit more realistic when used with their CINEMA DSP HD CUBIC. Moving to music though, DSP-Z9 had the upper hand through and through as you hardly use any DSP modes other than 9-channel/ 11-chanel Stereo.

Yamaha DSP-Z9 sits above DSP-Z11 in terms of Audio Fidelity & Power Output

2znyi3l.jpg


A lot of downgrades were made in DSP-Z11 over DSP-Z9s un-compromising Pure Audio Fidelity design approach to save money and compensate for their use of exuberantly costly HDMI board. These boards were particularly problematic and lot of resource was put in place to make them work properly. So firstly DSP-Z11 was manufactured in Malaysia loosing the epitome of product quality one gets guaranteed by Made in Japan tag at the back of DSP-Z9. But manufacturing gets cheaper now saving cost. Shunning of complex and expensive octa-chambered internal chassis of DSP-Z9 while a much simpler & less expensive quad-chambered chassis was now being used in DSP-Z11. All of digital audio board, analog audio board, digital video board containing HDMI inputs/outputs and analog video board were now put in one single chassis chamber of DSP-Z11 increasing the vulnerability towards internal interference.

Yamaha DSP-Z11

Quad Chambered Chasis

1444n83.jpg


HDMI 1.3a Video Board

2ia5ton.jpg


Both Analog and Digital audio/video Circuits in a single Chassis Chamber

2e2ffvl.jpg


Power supply now contained cheaper EI core mains transformer with much lower power rating in comparison to DSP-Z9s expensive use of toroidal transformer. Power capacitors were also slightly downgraded while the power amplifier section took a major blow with much lower power output capacity and its ability to sustain 4 ohms load on all channels driven. The support for using DSP-Z11 as a dedicated power amplifier was gone too, as it was no longer deemed fit to be used as a power amplifier like DSP-Z9. Some critical components of the digital audio board responsible for influencing digital audio fidelity was downgraded as DACs became 4x cheaper compared to DSP-Z9, support for digital audio processing over 7.1 channel analog inputs were gone as the expensive ADCs of DSP-Z9 got removed. The fully balanced analog signal transmission, a specialty of DSP-Z9 being inspired from high end stereo amplifiers was dropped as it was deemed too expensive to use in DSP-Z11. In return the big chunk of money saved here was better used to buy expensive HDMI chipsets for the digital video board, full 1080p video up-conversion support, expensive DSP audio processors and various networking capabilities. With all these ramifications, in my view DSP-Z11 still sounded exceptional well, very well poised, and was better in movies over DSP-Z9 with their CINEMA DSP HD CUBIC.

Yamaha DSP-Z9: Digital Audio Chain

11glikh.jpg


Yamaha DSP-Z11: Digital Audio Chain

aebek0.jpg


Yamaha was still using their own microprocessors for DSP audio processing in DSP-Z9, but with advancement of time lost the race to Analog Devices and Texas Instruments in terms of pure processing power. Yamaha slowly shifted to using DSP processors from Texas Instruments and as in case of DSP-Z11, four were used in their digital audio chain. DSP-Z9 used a 32-bit SHARC Melody ULTRA ADSST-21161 for decoding HT audio formats. These SHARCs had their core running at 100 MHz having computing power up to 600 MFLOPS. But Dolby TrueHD and DTS HD MA, I believe required much more computing power to be decoded in real time. Hence the newly released and highly expensive 32-bit Texas Instruments Aureus TMS320DA710 (DA710 series) was used for HT audio decoding purposes in DSP-Z11. These Aureus had their core running at 300 MHz having computing power up to 1800 MFLOPS, three times that of SHARC in DSP-Z9.

Yamaha DSP-Z11: Digital Audio Board

4qphso.jpg


For their own Digital Sound Field Processing technology DSP-Z9 used their own 32-bit YSS-930 Lsi in quad configuration, each of them having a dedicated 4 MB of static RAM containing Yamahas own propriety DSP digital data for processing. 16 MB of data was lot to process for those quad YSS-930 DSP processors. DSP-Z11 on the other hand used a pair of 32-bit Texas Instruments Aureus DA70Y series microcomputers. These DA70Ys had their core running a 266 MHz while being four times more powerful than a single YSS-930. So DSP-Z9s quad YSS-930s was as good as a single Aureus DA70Y, but DSP-Z11 implemented two of them for DSP processing hence two times the computational power of DSP-Z9 with 2x more data to process. Hence two 16 MB banks of static RAM were used for the two DA70Y, 32 MB in total. For their own auto acoustic calibration (YPAO) DSP-Z9 again used their YSS-930s in quad configuration with a total of 16 MB of memory while DSP-Z11 had a single Aureus DA70Y with a single 16 MB memory chip.

So in the end the answer to your question is DSP-Z11 was a completely new model with no technical design relationship with DSP-Z9, had HDMI 1.3a support for BD audio track decoding, 1080p video up-conversion and being 2x more powerful in Yamahas sound-field processing capacity over DSP-Z9.

I also find looking at the images of onkyo nr1000 having hdmi, si it is a 3rd gen or 2nd gen?

Onkyo TX-NR1000

2me5y61.jpg


2mg2fdh.jpg


Onkyo TX-NR1000 came with the default support of HDMI 1.0 for video only. That too for 720p/1080i. There was a promise from Onkyo to upgrade this HDMI card with one capable for HDMI 1.3 standards, which later was realized as a false promise by customers. The truth was while designing the TX-NR1000 the engineers never ever imagined in their wildest dreams that HDMI 1.3 will end up requiring more than twice the bandwidth (10.2 Gbit/s) over HDMI 1.0 (4.95 Gbit/s). So the TX-NR1000 was not designed to support these levels of bandwidth internally, the idea of an upgraded HDMI 1.3 card was dropped. As such it was never able to decode BD audio tracks, released prior to 2006 making it a 2nd Gen Uber.
 
Last edited:
Have anyone heard the rotel 1067 avr? Today I had the chance and was pleasantly surprised by its sound. A nice sounding avr, powerful too though not as refined as my dsp z9 but still much smoother and soft sounding to marantz 6009.
 
What a phenomenal thread! Deep and hard to acquire knowledge - all detailed out and summarized at the same time - in a single thread. Much thanks to rishiguru and others contributing in this thread!

The only thing that leaves me wondering is - how this compares to a prepro + multichannel power amp combination. Of course, we are talking about two different things, and this thread is really an ode to these monster beauties.

Still, I wonder if an entry level combo like Outlaw 975 prepro + Outlaw 5000 (5 channel power amp - or some other multichannel power amp - or even a stereo power amp) would possibly come within spitting distance of these uber integrated beauties.

I suspect the DAC section would be inferior (along with op-amps etc.), and possibly the preamp section as well. However, the power amp section would be equally beefy and equally high quality - and this is often the biggest weakness of integrated AVRs.

http://www.outlawaudio.com/products/975.html

http://www.outlawaudio.com/products/5000.html
 
Rishiguru thanks to your highly informative post about the HK vs. the Lexicon. I am curious about your tantatlizing quote: "Apart from marketing there are obvious differences between the two; while both being designed in United States (US), Lexicons are also assembled there packing better built quality, exotic designs schemes using selected, expensive Grade-A quality electronic components for supreme performance & reliability wrapped in an elegant, sturdy chassis to sustain prolonged lifespan for next quarter of a century, the average minimum life of Ubers. Looking at the innards of 2004 released US $7,000 Lexicon RV-8 avr revels this. More of Lexicons in my next post."

Can you please expand on your comment about the lexicon and give us a run down of your expert view on Lexicon RV 8. I am a lucky owner of this superb machine which I bought recently used from another audiophile. While it is certainly one the very best I have heard, I would like your opinion as well.

Pardon me to reply so late; the Lexicon RV-8 post never fructified due to lack of time. Till now I was never able to go through its minute details. Lexicon marketed the RV-8 as Separates in an Integrated Package to justify its astronomical price. I expected a lot but somewhat got flabbergasted by the outcome. Below is the objective run down on RV-8 you are looking for:

Lexicon RV-8

iyg0f7.jpg


-----------------------------------------------------------------------------------------------------------------------------------

An AV amplifier/ receiver when looked upon from AV separates point-of-view happen to be an amalgamation of a separate AV processor with a multi-channel power amp on a single chassis. Hence from here on I have tried to put my views under similar headings.

Chassis

The chassis of Lexicon RV-8 is nothing special to talk about. It is a quad chambered glazed steel chassis with no copper or black protective coating to prevent interference and corrosion. The right chamber contains a 4-channel analog power amplifier; in left chamber a 3-channel analog power amplifier shares space with a digital power supply for AV processor part. A strange mix of analog and digital. The largest visible middle chamber contains the power supply for power amplifier; all exposed to the analog/digital mixed audio circuit board as well as analog video board. The fourth chamber is underneath, open in one side towards power supply containing a mix of digital DSP board with half shielded analog Phone section & AM/FM tuner. So the whole concept of separating the analog and digital components looks a lot compromised in comparison to octa-chambered, black coated steel chassis of DSP-Z9. The lack of expensive and beautifully crafted side and top exterior aluminum panels as found on DSP-Z9 is sorely missed in RV-8, replaced with a bog standard thick matt black steel cover robbing a lot of high-end feel.

Yamaha DSP-Z9

2v7upo5.jpg


Yamaha DSP-Z9: Hidden Oil Damped Front Panel

fzcil4.jpg


Lexicon RV-8: Count the buttons, there are 45 of them :D

143fb4i.jpg


Lexicon RV-8: Simple steel chassis

34pdnwl.jpg


Lexicon RV-8: Low-cost glazed steel affair

dq3ae1.jpg


Lexicon RV-8: Quad chambered chassis

6yns07.jpg


The front aluminum panel facia of DSP-Z9 is beautifully crafted and finished in brushed silver, gold and titanium treatments, having a clean, uncluttered look by hiding almost all controls inside a hidden front panel. You just get a power on/off button, a source selector knob and a big billeted aluminum volume control knob on the front facia. In contrast RV-8 restores some value with an aluminum finished front panel but again dips to a low cost alternative by placing all controls on the front panel. After all hidden oil dampened front panel doors as found in DSP-Z9 adds cost. Even though RV-8 has a tiny display panel, I felt disappointed to find Lexicon went for an all buttons approach to save cost over expensive rotating selector knobs which would have made the facia look a lot uncluttered. Instead you have a get lost feel when you look at RV-8 and all its forty five buttons slammed on your face. These measures are all to save cost, RV-8 chassis ending up half as expensive as DSP-Z9.

-----------------------------------------------------------------------------------------------------------------------------------

AV Processor

Audio Part

Lexicon RV-8: Back Panel

ajpmgx.jpg


Yamaha DSP-Z9: Back Panel

2zxp7rt.jpg


As of today the biggest drawback of Lexicon RV-8 (Version 2) is the lack of support for 7.1 channel analog audio inputs which makes it incompatible with any current generation BD players having DTS HD MA and Dolby TrueHD. It seems pretty strange even with an in-built 7-channel power amplifier, thus being THX ULTRA 2 compliant it strangely has support for 5.1 channel analog inputs only. In contrast Yamaha DSP-Z9 released on the same year have 7.1 channel analog audio inputs for its seven equally powered audio channels, again THX ULTRA 2 complaint, supporting any BD player with 7.1 channel analog outs. Three types of theory come up my mind:

- They deliberately wanted users to use their own Logic 7 post processing for 7.1 channel sound. Logic 7 transforms any 2-channel/ 5.1 channel/ 6.1 channel (DTS ES, Dolby EX) audio sources to a 7.1 channel audio output.
- They intended RV-8 owners to have a 5.1 channel Zone-1 setup and a 2-channel setup for Zone-2, thus using all its powered audio channels. DSP-Z9 will also support a 2-channel Zone-2, but is still capable of a 7.1 channel Zone-1 setup, courtesy to its nine powered channels, hence the number 9 in its model name.
- Third theory is about those Lexicon engineers being eccentric enough to omit future audio standards like 7.1 channel audio back in 2004, stuck to 5.1 channels.

2nd Gen Ubers as a whole implemented high quality digitally controlled analog volume controllers to meet DVD-A & SACD standards, but their placement in RV-8s audio chain is radically different from typical Japanese implementations. For a Denon AVC-A1SRA, Pioneer VSA-AX10Ai-S, Onkyo TX-NR1000 or Yamaha DSP-Z9 these volume controllers are situated at the very end of the audio chain much after DSP processing. They can found in between freshly I/V converted analog audio signal from DACs and the power-amplifier acting as pure attenuators. This is quite a neat design as there is no need to worry where from the audio signals is coming. Be it an analog source or digital at the end it has to pass through these volume controllers acting as final frontiers to enter the power amplifier domain.

Lexicon RV-8: Audio Circuit Board can be found under the small Video Board, all open to unshielded power supply section

2d7u8t0.jpg


For RV-8 though these volume controllers are used at the very beginning of the analog audio chain, situated just before the ADCs to be converted to digital signals and fed for DSP processing. Thus the 6-channel analog audio from 5.1 channel analog inputs are digitally regulated by three Burr-Brown PGA2311 stereo volume controllers in single-ended configuration. I truly expected a dual-differential implementation here for the price of RV-8, but I am disappointed. DSP-Z9 went one step higher with their Yamaha YAC520 volume controllers in dual-differential configuration for its main seven channels incurring even less THD than this Lexicon implementation can manage. After passing through these volume controllers, RV-8s six channel signal is pre-conditioned by following op-amps: Texas Instruments MC33078 followed by another MC33078 before feeding the analog signals to ADCs. Three 192 kHz/24bit Burr-Brown PCM1804 stereo ADCs having 112 dB dynamic range are used in single-ended configuration to convert these analog signals to six individual digital audio signals ready to be sent to DSPs for post-processing activity. DSP-Z9 on the other hand uses four slightly higher quality 192 kHz/24bit Cirrus Logic CS5361 capable of 114 dB dynamic range for its 7.1 channel analog inputs, pre-conditioned by following op-amps: NEC uPC4570 followed by NEC uPC4574 in dual differential configuration. The ADCs of both RV-8 & DSP-Z9 are preconfigured to work at a constant rate of 96 kHz/24-bit as this is the maximum their DSPs can handle without down converting.

Lexicon RV-8: Digital DSP Circuit Board in left and Analog Power Supply board in right, no shielding in between to prevent internal interference

29dwkdz.jpg


Lexicon RV-8: Half shielded Analog Phono and Radio circuits share same space with Digital boards in the same chassis chamber

124bsdt.jpg


RV-8 uses a pair of 32-bit SHARC Hammerhead ADSP-21161 from Analog Devices for post-processing & auto acoustic calibration activities. 1,200 MFLOPS in series made RV-8 twice as powerful as Denon AVC-A1SRA while being nearly there with DSP-Z9s octa Yamaha YSS-930 Lsi implementation. These SHARCs did various post processing activities like THX and Logic 7, surround simulation effects with Lexicon Live (RV-8 Version 2), auto acoustic calibration (RV-8 Version 2) and bass management on incoming 6-channel digital signals. If digital audio inputs are used in RV-8, a custom 32-bit Cirrus Logic CS494001 (based on CS49400 series DSPs) performed decoding from Dolby/ DTS formats. This decoded 5.1 channel or 6.1 channel (DTS ES, Dolby EX) digital signals are then directly routed to the above SHARCs to perform post-processing & auto acoustic calibration. DSP-Z9 used a more powerful and expensive decoder SHARC Melody ULTRA ADSST21161. As with all 2nd Gen Ubers RV-8 is capable of digital audio processing up to 96 kHz/24bit untouched, but as 128 kHz, 176.4 kHz or 192 kHz are received it will under sample by half to 64 kHz, 88.2 kHz or 96 kHz respectively and then perform processing. So these DSPs were able to handle any sampling frequencies you can throw at them without getting shut down. After auto acoustic calibration the 8-channel digital audio signal from DSPs is passed to four discrete 192 kHz/24bit AKM AK4395 DACs capable of 117 dB dynamic range. While not the best AKMs, DSP-Z9 implemented the best Burr-Brown DACs available aka PCM1792. These 192 kHz/24-bit Burr-Browns obtained 129 dB dynamic range for all channels of DSP-Z9 while the center channel in dual-differential configuration led to 132 dB. For I/V conversion stages from these DACs in RV-8, following op-amps are used: Texas Instruments NE5532 followed by Texas Instruments MC33078.

Question arises as of how the volume is being regulated from digital inputs? If you can remember the three PGA2311 stereo volume controllers are placed between the incoming 5.1 channel analog inputs and their following ADCs. But digital inputs dont need any ADCs. As I found out in RV-8, the same volume controllers are able to regulate the volume of digital inputs by indirectly varying the gain of above mentioned NE5532 op-amps. Thus voltages form these DACs after I/V conversion are being regulated before feeding the power amplifier acting as passive volume controllers. For the rear surrounds an additional fourth Burr-Brown PGA2311 is provided. While using Direct PCM/ DSD modes on these AV amplifiers will you be able to pass a 128 kHz, 176.4 kHz or 192 kHz digital audio signal from coaxial inputs directly to feed the DACs, untouched. For analog inputs, one way to feed the internal power amplifiers with untouched 2-channel/ multichannel audio is to use Pure Direct mode which bypasses the digital board.

Video Part

Lexicon RV-8 has composite, S-Video and component video inputs/ outputs, limited to video switching capabilities only. The component video is capable of 720p/ 1080i max like DSP-Z9, being HDTV compliant. DSP-Z9s biggest advantage is its ability for video up-conversion, any video source from composite, S-Video or component will be up-converted to 720p/ 1080i via components, RV-8 being limited to video switching only.

-----------------------------------------

Internal AV processor Inputs & Outputs

Order: Lexicon RV-8/ Yamaha DSP-Z9

--------
AUDIO
--------

Analog Inputs

Multi-channel (5.1/ 7.1): 1/ 1
Stereo : 5/ 13 (1 from front panel)
Phono : 1/ 1

Digital Inputs

Co-axial : 4/ 4 (1 co-ax has support for laser disc)
Optical : 4/ 8 (1 from front panel)
i.Link : None/ 2 (Two 5.1 channel digital sources)

Analog Recording Outputs/ Zone 2

Stereo : 2/ 6

Digital Recording Outputs/ Zone 2

Co-axial : 1/ 1
Optical : 1/ 3

[The recording / Zone2 outs can both be used for recording or Zone 2 audio]
Internal Power Amplifier Support for Zone 2: Rear channel/ Presence channels.

Pre-Amplifier Out

Multi-channel (7.1/ 9.2 [7.1 + .1 + 2 presence]): 1/ 1 [Support for stereo subwoofers]

Option to be used as Power Amplifier

Channels: None/ 3 (Front left, Front Right, Center)

Summary

Lexicon RV-8 have less than half the number of audio inputs/ outputs of Yamaha DSP-Z9 while crucially lacking support for 7.1 channel analog. Those using SACD/ DVD-A players can also rejoice i.Link support of DSP-Z9, owners of RV-8 dearly missing that. Some additional capabilities of DSP-Z9 are the ability to be used as a power amplifier, front panel audio/ video inputs for ease of accessibility and support for stereo subwoofers.

--------
VIDEO
--------

Inputs

Composite : 5/ 8 (1 from front panel)
S-Video : 5/ 8 (1 from front panel)
Component : 3/ 6

Outputs

Composite : 2/ 2
S-Video : 2/ 2
Component : 1/ 2

Recording/ Zone2

Composite: 2/ 4
S-Video : 2/ 4

[The recording/ zone2 outs can both be used as recording or zone 2 video]

Summary

Lexicon RV-8 has half the number of component video inputs/ outputs of Yamaha DSP-Z9 and much less composite and S-Video support. No video up-conversion facility was supported.

-------------------------------------------

AV Processor Review Conclusion

Lexicon RV-8

zk00i9.jpg


Yamaha DSP-Z9

2hx7tkz.jpg


While comparing U.S. made RV-8 with Japanese DSP-Z9, I observed the distinctive differences in nature and thought process that went behind designing the AV circuit boards or if looked in a broad sense the entire AV amplifier. I do respect both cultures and their diversity, but If you look at the circuit boards of DSP-Z9 or for the matter any Japanese Uber AV amplifiers you will immediately realize and appreciate their special skill and uncanny ability to carefully select electronic parts and arrange them in a small sized circuit board within limited space and still be part of a harmonious whole. I think it is in their culture, a likeliness to represent a universe within a limited space. The RV-8 on the other hand is distinctively American, having surplus of space with large expansive boards having circuit components placed so further apart that literally one has to use binoculars to find DSPs while standing above the DACs (pun intended). The result is at an equal amount of board area, DSP-Z9 have two times the functionality and flexibility of RV-8 while still retaining better performance. RV-8 also happens to be the longest AVR dimensionally at 540 mm to accommodate the big circuit boards; almost 3 inches deeper than DSP-Z9.

Lexicon RV-8: Crazy Long

2lkfbtd.jpg


If we split US $4,500 asking price of Yamaha DSP-Z9 as 60% and 40% for internal AV-processor and multi-channel power-amplifier respectively, it comes to US $2,700 for AV-processor part. After analyzing the hardware components used in both, DSP-Z9 wins through and through. It is using better quality components in every area bar none, be it 4x expensive DACs, ADCs, more powerful DSPs, volume controllers in dual differential mode. Even the capacitors used in DSP-Z9 are of much higher quality Nichicon Gold Tune, while RV-8 uses standard quality Panasonics. On the video part DSP-Z9 have video-up-conversion facility, a very expensive technology back in 2004. This valuable feature single handedly lifts DSP-Z9 to much higher plane in comparison to RV-8. DSP-Z9 also contains two times the inputs and outputs of RV-8 on a rough scale, making it two times more flexible option. So as a whole the Lexicon RV-8s AV-processor part should not cost more than half of DSP-Z9, i.e US $1,350.

------------------------------------------------------------------------------------------------------------------------------------

Power Amplifier

AV amplifier manufacturers from Japan like Denon, Sony and Yamaha set lofty targets while designing 1st & 2nd Gen Ubers in terms of power output capability. They wanted to create the most powerful AV amplifier there ever was, reaching 200 watts per channel in stereo under 6 ohms load. They never gave enough importance to 4 ohms load as the general standard for loudspeaker impedances have always been 6 ohms in Japan. Under 8 ohms load they had to deliver a minimum of 170 watts per channel in stereo. Mind you these wattage figures are not kamikaze specs as found in todays AVRs by same companies. These are true power output specifications, applicable in real world for the entire audible frequency range (20 Hz 20 kHz) with less than 0.05% THD. Only four AV amplifiers are bare chested enough to meet this target, they are Denon AVC-A1SRA, Denon AVC-A1XVA, Sony TA-DA9000ES and Yamaha DSP-Z9.

Yamaha DSP-Z9

1547gxx.jpg


Lexicon RV-8

2m03k8.jpg


Coming back to Lexicon RV-8 if I have to rate its internal seven channel power amplifier in terms of pure grunt, then I admit it to be the best I have ever seen in any AV amplifier/ AVR till date. But first let me get this straight, Lexicon does not deserves the credit for this mighty power amplifier that adorns RV-8, as they did not design it in the first place. It was outsourced from Crown Audio, one of their sister concerns under Harman group specializing in professional audio. The Japanese implementations were slightly less powerful in comparison but they countered it by using higher quality components in both the power supply and power amplifier modules than in RV-8. An AVC-A1SRA has high end ELNA as electrolytes while DSP-Z9 uses Nichicon Gold Tune throughout. In contrast RV-8 uses medium quality and half as expensive Panasonics in both their power amplifier & power supply modules, but with more capacitance. So it is a balancing act between outright power of RV-8 versus Japanese product quality and longevity. Lexicon never quoted the power output of RV-8 in stereo, other than saying it will do 140 watts per channel with all channel driven simultaneously throughout the entire audible frequency range at 0.03% THD. Sound&Vision (then hometheater.com) came to our rescue quoting the power output of both DSP-Z9 & RV-8, measured in their labs as below:

@ 1 kHz @ 0.1%THD

@ 8 ohms, 2-channels
Lexicon RV-8 : 182.5 Wpc
Yamaha DSP-Z9: 179.8 Wpc

@ 4 ohms, 2-channels
Lexicon RV-8 : 322.9 Wpc
Yamaha DSP-Z9: 318.4 Wpc

@ 8 ohms, 5-channels
Lexicon RV-8 : 170.3 Wpc
Yamaha DSP-Z9: 166.6 Wpc

-----------------------------------------------------------------

The power output figures seem quite similar between DSP-Z9 and RV-8, the later rejoicing few watts of advantage which becomes undistinguishable under normal hearing circumstances. This also implies the Crown amplifiers inside RV-8 matched the specs of Japanese Ubers in reaching 200 watts in stereo under 6 ohms and 170 watts under 8 ohms load. Both DSP-Z9 & RV-8 uses toroidal transformer in their power supply with an estimated capacity of 1500 VAC. For power conditioning two pairs of standard quality Panasonic 27,000uF/ 80V power capacitors are used in RV-8, reaching a total capacitance of 108,000uF!!! In contrast DSP-Z9 has half the capacitance at 56,000uF but use a pair of better quality Nichicon Super Through 28,000uF/ 80V power capacitors. My biggest shock was to discover RV-8 using two pairs of ON Semiconductor MJ21193/ MJ21194 power transistors per channel on +/- 70 volt rails. These are 250 watt devices in dual configuration, 500 watt in total per channel. So even under 6 ohms loads while delivering 200 watts per channel in stereo, it still has 300 watts of overhead.

Lexicon RV-8: That's a half foot wide toroidal transformer!!!

169ggeh.jpg


Lexicon RV-8: Two pairs of ON Semiconductor MJ21193/ MJ21194 per channel

ifq2qp.jpg


Yamaha DSP-Z9: Two pairs of Sanken 2SA1492/ 2SC3856 per channel

wjukjl.jpg


In contrast DSP-Z9 uses two pairs of Sanken 2SA1492/ 2SC3856 on +/- 65 volt rails. These are 130 watt devices in dual configuration, 260 watt in total per channel. At 6 ohms load while delivering 200 watts in stereo it has just 60 watts of overhead. This signifies the difference in mindset between Japanese manufacturers targeting a minimum loudspeaker impedance of 6 ohms with limited overhead left to spare and U.S. breed RV-8 muscle with lots of overhead to decently perform at 4 ohms loads. That said I have seen DSP-Z9 to pull nine hulking Axiom Audio M80 towers (4 ohms rated) all around at extremely high volume levels for sustained amount of time without breaking a sweat. But theoretically speaking the Crown amplifiers in RV-8 s will do a slightly better job under same circumstances. The limiter of RV-8 if any is its power supply, which has more or less the same power rating of DSP-Z9. Hence their power outputs coincide in both two channel and multi-channel tests as performed by Sound&Vision. They weigh also identical at around 30 kilos.

For a 60% and 40% split for internal AV-processor and multi-channel power-amplifier respectively of DSP-Z9, it comes to US $1,800 for inbuilt power amplifier. The Crown amplifiers in RV-8 deserve higher marks than DSP-Z9, but it has only 7 channels of amplification. DSP-Z9 has more flexibility with nine channels of amplification, a 7.1 channel Zone1 and 2-channel Zone2 is easily possible. Most importantly DSP-Z9 has the ability to be used as a dedicated power amplifier, RV-8 have no such options severely limiting its capabilities. So if these power amplifiers are shipped with their respective chassis as mentioned above whatever extra money if any Lexicon had to pour for this extra amplifier performance under 4 ohms load is more than compensated by DSP-Z9s two times expensive chassis. So, I will say the Crown amplifiers in RV-8 should not cost more than US $1,800 of DSP-Z9.

---------------------------------------------------------------------------------------

Pricing

Lexicon RV-8

2h2o8wn.jpg


Yamaha DSP-Z9

aetuo5.jpg


If Yamaha would have ever made a RV-8, in context to DSP-Z9 (US $4,500) the asking price should have been (1,350 + 1,800) = US $3,150. But RV-8 was manufactured by a small high-end U.S. company named Lexicon. How much did they ask for it? It was an astounding US $7,000 for the base version. But wait it is not the end of story. High-end brands have something called upgrade path to sip in more money from their customers. Mind you this base version has no auto acoustic calibration and digital signal processing technologies implemented. So they made Version 2 software upgrade, which included Lexicons own DSP processing known as Lexicon Live, auto acoustic calibration, improved Logic 7 processing and Dolby Pro Logic IIx. All at US $500 more. Unfortunately Lexicon Live required two additional microphones to be kept at both ends in the room to operate, so another additional US $500 was required for those microphones. Final cost of Lexicon RV-8 (Ver 2) with all its ancillaries came up to (7,000 + 500 + 500) = US $8,000. So the Lexicon version of RV-8 was sold at 254% the price of an equivalent Yamaha manufactured RV-8. Or Lexicon made a 154% profit while selling the RV-8. Or you can buy a DSP-Z9 and still save US $3,500 over a Lexicon RV-8. But making such comparisons are baseless.

You have to understand the marketing strategy of both companies represents the reverse economies of scale to an extreme degree. Big electronic consumer companies like Yamaha sells hundreds of thousand DSP-Z9s throughout the world. They have so much money; they can literally buy Lexicon in one hand and sell in another. So they base their pricing on manufacturing cost supplemented with a margin to cover operating expenses and profit. On the other hand small high-end companies like Lexicon will end up selling few thousands of RV-8 at maximum, so their product pricing is based on their operating expenses and profits divided by the units projected to be sold. Small companies like Lexicon, Arcam, Anthem or any other so called high-end brands don't base their products mainly on cost of manufacture alone; they simply cannot survive like that. It is mainly due to the absence of development infrastructure and manufacturing capability that big companies like Yamaha and Sony rejoices, who can sell any of their models in huge volumes at much lower prices and still garner profit. The small high-end brands on the other hand work proactively at developing a consensus among their potential customers who are generally few in number for better performance in return for much higher selling prices. The performance advantage they claim their products have may or may not exist at all, as we found here DSP-Z9 have much higher manufacturing cost than RV-8. But the belief of their potential customers in Lexicon brand as a high-end brand is critical to their success, so as a high-end small company they need to keep prices at least two times higher in order to continue that belief and justify the label on the product.

Give a hardcore audiophile a Yamaha and a Lexicon AVR of same price or better still a Yamaha and a Luxman stereo integrated amplifiers of identical prices, you will see he will almost always end up choosing the Lexicon or Luxman over Yamaha because they are high-end brands. He will choose them even if Yamaha provides somewhat better performance at identical prices. It is human nature. Give a knowledgeable audiophile an Oppo BDP-83 (US $800) and Lexicon BD-30 (US $3,500) blu-ray player; you will see he will almost always end up choosing BD-30 over BDP-83 even though both have identical performance. He will justify Lexicon blu-ray player as high-end and has better performance to justify over four times the price of Oppo. This is placebo effect. I will really feel for him when he comes to know the Lexicon is actually a re-cased Oppo at US $2,700 more. (Refer: Lexicon BD-30 Blu-ray Player (Oppo BDP-83 Clone) Review)

With all the pricing strategy differences and RV-8 costing nearly two times a DSP-Z9, in the end what matters most is How do they sound? What about their sound quality which can only be measured subjectively? Fortunately we at hifivision have someone in this very thread who owned both and shared his views as can be found under:

Yamaha Z9: The z9 was a true revelation. I was so elated with its performance; I sold my Lexicons within few months. Lexicons for sure had more driving power but I was in ruthless trimming mood. Comparing sound signatures it was neither smooth like denon or as sharp as pioneer and be best described as neutral to bright sounding. Its defining characteristics are terrific transparency, incisive dynamics, deeply extended bass that offers excellent pitch definition and superb three-dimensionality. From very onset it was equally balanced for both music and movies. SQ wise it offered every flavor an audiophool (a later realization after being a self proclaimed audiophile) like me will ever want. Z9s breakthrough pre amplifier design hidden in separate chambers in the chassis to counter electromagnetic interference, a true hifi philosophy, offered unheard neutrality, resolution and musicality in avr category which led many of my friends (including me) use it as a dedicated AV processor powered by separate monoblocks. Whats more, the preamps contained better than entry level phonostage offering surprising textural finesse, giving HT users a warm welcome to the world of analog. Later on I found its internal amp to be powerful enough for my loudspeakers as it effortlessly pulled my seven 804s. Till now I have not spoken about its video upscaling prowess which was tour-de-force among avrs, my HDTV offered never before seen clear and pristine upscaled videos from VHS tapes. Lastly I must add Z9 has the best built-in headphone amp I've heard. One fine day I was just listening to my headphones on the Z9 and was pleasantly surprised it was more than just an afterthought. I have listened to many preamps/amps/receivers using the internal headphone amps over the years, and have always observed a limitation in terms of distortion at reasonably high listening levels. With Z9 the sound doesn't become unlistenable and grainy when pushed, there's just more presence. Bottom line, I find Z9 to be the best receiver in last two decades.

Lexicon RV8: I admit to be a Lexicon fan from the very beginning and had to bring this up as rishiguru missed it. I had their separates, touted them to be better than others (even mcintosh) and when they finally made an avr, I immediately grabbed it. Naturally due to hi end brand credibility it initially retailed at seven grand (2.5 grand more than z9), was most expensive receiver in the market. SQ wise it almost had the magical ability to create something like the audio equivalent of persistence of vision with clarity, transparency, liquid mids and highs, and an ability to render dynamic contrasts second only to that of the z9. In short a shade better than z9 in having a slightly forward-sounding midrange with equal grunt. Apart for sound quality it did not even contain half the functionality/feature set of z9. No ilink was a real bummer. Released a few months later than z9 it only supported 5.1 channel inputs for its 7 internal amps which was frankly absurd for a receiver of this class & price. With two successive internal amp failures I finally admitted z9 had better build quality than lexicon (very hard for me to digest) while offering ton more usable functionalities. I sold it on an impulse to have a denon 5805, it still shares my memory with its beautiful tonal balance, wonderful soundstaging, and high resolution. In terms of SQ what set RV8 and Z9 apart from the rest are their astonishing dynamic coherence, with a bass response that was both controlled and detailed and utterly effortless reproduction of the most demanding bottom-end transients unheard in the receiver market. I still regret selling the RV8.

Link: HiFiVision: Help me to choose between these MEGA MONSTERS!!!

Hope this helps.:)
 
Last edited:
I picked up a RX-Z9 that was dropped after looking at the internals in this post.
I managed to straighten the rear panel, and straightened the circuit boards and generally got it working.
I didn't have the yamaha optimizer mic, so I used a denon mic and I set it up on my PCS8/FCM8 speaker combo.
Somewhere there must be a problem in it. It sounds lifeless and gutless. I also have a few video problems. May need to crack it open again.
Anyway, in pure direct mode I get a few glimpses of what it can do.
Very very good even if its a bit analytical sounding. I find it rather denon like. I do need the YPAO mic though, I think my denon mic may have a different parameter set.
Thanks rishiguru for this detailed post and pics.
Srinath.
 
Using Denon Mic will obviously spoil the sound.I tried Denon Audyssey mic with my Yamaha and sound was worst.
 
Using Denon Mic will obviously spoil the sound.I tried Denon Audyssey mic with my Yamaha and sound was worst.

Yes, me and this friend of mine were wondering why this Z9 was sounding like a denon 3808 (he said it sounded exactly like it) and the end conclusion was that well, I ran Audyssey on it.

And I ended up getting another Z9, this one wasn't dropped and fixed up and I got the original remote with it.

Cool.
Srinath.
 
I've played both a good bit. The dropped one started abruptly turning off. I have possible causes for it, so Its shelved pending diagnosis and repair if possible.
So observations:
1. The non dropped one runs significantly hotter than the dropped one.
2. They both sound very much alike, so my repair didn't improve the dropped one. LOL.
3. I've run it on a PCS8/FCM8 setup internally XO'ed first order 400 hz (close to the 801 s2's 380 3rd order cos the PCS8 is the 801 s2 woofer) and on a yamaha NS 1000m set.
4. Only have the denon mic, no ypao mic so I didn't get anywhere on that. The Z series YPAO mic isn't easy to find. And its $90+shipping from europe.
5. They sound significantly better on the PCS/FCM set but I've had far "lesser" amps sound better on those. In fact my DSP 3090 sounded better, so did the Onkyo TX SV 909.
6. They sound near about awful on the NS1000, which makes me doubt the 300,000 people that worship the NS1000.
7. The Z9 also seems gutless. I need to have it at near about -10 db volume to make for a decent "movie night" out of the wii. It has a +6/-6 dB range - but that aint gonna do it, the thing will not drive you out of the house @ +16 dB where it stops off.
8. The caliberation is supposed to set 0 db on the receiver to 105 dB in the room its run in. I wonder if the denon mic is much much higher sensitivity than the YPAO unit.
9. I cant seem to get any better sound by manually setting it, or somehow disabling it.
10. The big thing for this amp in terms of sound quality I think is the fact that the quiet sections are super super quiet. Its noise floor is very very low, and makes it sound like the instruments and vocals are in in the room. Pure direct does this the best. I run it into my tubedac 11 and it is awesome.

I'm not done with this, my 802's are next and a few others are behind it but so far I'm ambivalent on these 2. I see the potential, but I need that potential to be realized. Maybe the YPAO mic holds the key. I dunno, I am going to work on the broken one and go from there.
Cool.
Srinath.
 
OK I played with it for an hour this morning. The psychedelic modes (church Tokyo and freiburg etc) on this have manual delays and adjustments. They easily leave my dsp 3090 in the dust when set to the max. I should back off a little bit I suppose, cos I cant understand even plain people talking let alone music. OK That is one of my favorite features of the dsp 3090 that's beaten by the z9. Now onto the quality of the sound and the power.
I think the Z9 is supposed to have that dry sound, the 3090 seems very full and very enjoyable, the z9 is pretty precise and analytical. I cant change that, but warmer speakers may help there. Anyway now I need to get it to its theoretical max of 121 dB - or get to 105 @ 0.
Cool.
Srinath.
 
I had to mention about this relatively unkown avr below, though it does not fall in the class mentioned above:

JVC DP20: The most underestimated receiver of its generation, it had so much to offer while being ignored due to lack of snob value. On the day I went to buy the Yamaha z9, a friend of fine being a relative newcomer to the world of music and HT asked a favor to buy cheap receiver for him as starter. As I shelled 4.5 grand for my z9 I saw this jvc branded dp20 selling for mere 850 dollars brand new. They had an initial retail price of 2.5 grand but due to the lack of hi end brand image the re-sellers was selling them cheap. My friend being out stationed for over three month due to shipping business, I had enough time to spend a do direct comparison with z9 and 59 txi. Lacking the hi-class WOW effect of Z9 it was enough sound wise to put smile across my face. Its defining characteristics are an unfailing smoothness through the midrange and on up through the upper midrange, a gentle touch of warmth with high-frequency transients cymbals, vocal sibilants just where you'd want them: naturally smooth, yet exceptionally detailed and convincingly non-mechanical. However, relative to z9, the DP20 comes up a little short in terms of high-frequency transparency, more of a seethrough sound and in terms of midbass punch. It had separate 5.1 and 7.1 channel inputs though lacking ilink. It had bass and distance management system that operated flawlessly and I was awed at how much this avr provided for its mere asking price. If I had to describe dp20 in short it will be like having the sound signature of denon while having the grunt of 59txi and in having a little limited feature set of lexicon rv8. In the end I gave it ten out of ten in terms of SQ, power and features relative to its asking price. No other avr can get that good relative to price other than z9.

Victor/ JVC Brand Logo

2nq7k7d.jpg


My love for Victor/ JVC brand always stood strong with the use of many Onida products in our home. More than two decades back Onida sold consumer electronic goods in our country and had a joint venture with JVC. Our Onida VCR was just a rebadged JVC with excellent product quality and performance to boot. Our Onida CRT television is over two decades old and is still in working condition with a JVC picture tube implanted on it. It is to note Victor of Japan is JVC to the rest of the world. As Victor Company of Japan they did design and produce hardware like televisions, AV amplifiers, DVD players, stereo integrated e.t.c. just like any other consumer electronics company. But they are also a software manufacturer. They have the additional ability to enhance the performance any audio/ video hardware product by implementing their own propriety software. This type of software primarily comes from their studio engineers at Victor Studio. One such world renowned sound quality enhancing software from this firm is K2 Processing technology. In this post I will once again project their AV amplifiers/ AVRs, actually their most expensive and best sounding one. As expected such beasts were born in the Uber AV amplifier era, and in this case it was 2003. In Japan it is known as Victor AX-V8000 with an estimated price of US $3,000, a pure AV amplifier. For the rest of the world, it is an AVR better known for JVC RX-DP20V retailing at US $2,500. Why AX-V8000 is more expensive than RX-DP20V will be reveled later in this post, but as of now we must go through some of Victor/ JVCs cool-stuff technologies that made AX-V8000/ RX-DP20V quite a unique product that deserved attention.

K2 Processing Technology

The monogram K2 stands for the last names of two senior engineers, Kuwoka from Victor Company of Japan and Kanai from Victor Studio. The K2 internal project primarily got initiated when studio recording engineers at Victor Studio complained about their own CD recordings in early 1980s. They claimed there was a clear degradation in sound quality when compared to analog master copy from where the recording was made. An investigation phase led to the discovery that during CD recording process electrical distortion like jitter, rippling etc. got introduced in the master digital signal created after analog-to-digital-conversion from the analog master which is then getting recorded in CDs. When these recorded CDs were played back this time being converted from digital to analog signals by DAC for us to hear, recorded sound with additional jitter & rippling in CDs made an adverse effect resulting in inferior sound quality compared to analog master. To resolve this degradation in sound quality during CD manufacturing process a joint internal project between two teams led by hardware engineer Kuwoka & studio engineer Kanai gave birth of this technology, better known as K2 processing.

K2 Technology Logo

fm1flk.jpg


The two main implementations of K2 processing are:

1) Maximizing sound quality during down-converted CD recordings from Analog Master Copy: An attempt led by these two engineers to improve the degradation in sound quality that occurred during recording & manufacturing time led to the original version of K2, which was named "K2 Interface". The first JVC K2 interface got introduced in 1987 for maximizing sound quality during CD recording process in the confines of the Red Book format i.e. 44.1 kHz/16-bit. During this process extremely accurate 192 kHz/24-bit ADCs (analog to digital converters) are driven by atomic clocks which are a thousand times more accurate than crystal clocks. Substantially reduction of jitter and rippling in the digital master signal is obtained from analog master. K2 software algorithms are then applied to this master 192 kHz/24-bit signal to be down-converted to 44.1 kHz/16-bit and get recorded in CDs. It is to note K2 processed CDs behave like normal ones and you do not need any specific decoder in CD players to play them. Victor/ JVC claims their proprietary K2 processing can retains almost all the sound quality of master 192kHz/24-bit digital signal even after getting down-converting to Red Book format. At first glance it looks quite an unrealistic claim but at the same time there must be some positive outcome from repeated subjective evaluations made by studio engineers in order to confirm the improvement in K2 processing algorithms. The wide use of K2 processing in mastering and manufacturing process of their renowned eXtended Resolution Compact Disc (XRCD) confirms some truth in it. After all by general consensus, XRCDs are the highest quality 44.1 kHz/16-bit recorded CDs you can ever buy.

2) Restoring sound quality of down-converted linear formats found in CD/ DVD-Video recordings as well as compressed multi-channel DVD-Video recordings to near Analog Master Copy sound quality: K2 processing belonged to Victor/ JVC Group and was quietly used in their CD recording process to have an edge over their competitors as general public new nothing about it. Meanwhile, K2 development continued in both hardware and software giving birth to Extended K2 processing Ver. 1.0 in 1997 and later Extended K2 processing Ver. 2.0 in 1999. The main objective of Extended K2 software processing is to improve the sound quality of down-converted linear audio formats like PCM and compressed multi-channel audio formats like Dolby Digital/ DTS variants found in CD/ DVD-Video recordings. An attempt was made to come closer to analog master sound quality. With this came the realization of its huge applicability in consumer electronics market. Hence decision was taken to embed the second version of Extended K2 processing in some LSI chip later giving birth to Compression Compensative Converter LSI in late 2000. This LSI is better known as CC Converter containing Extended K2 processing algorithms.

CC Converter LSI

17fu4g.jpg


Looked at a broad scale the two main parameters effecting sound quality of digital audio are bit-depth & sampling frequency. Say in a CD recording process an analog master copy after A/D conversion becomes 192 kHz/24-bit digital master signal. This master signal is then down-converted to 44.1 kHz/16-bit in digital domain to be recorded in CDs as per Red Book format. Following problems then arise:

1) As quantization resolution gets down-converted to 16-bit for recording in CDs, a very faint analog signal in analog master may not be accurately reproduced after D/A conversion from these recorded CDs. This leads to sound quality degradation.

2) As sampling frequency is down-sampled from master 192 kHz to 44.1 kHz in CDs, very high frequencies in the audible range say 20 kHz may not be accurately recreated after D/A conversion from these recorded CDs. A 192 kHz master signal contains multiple inaudible high order harmonics above 20 kHz to accurately produce a 20 kHz audible signal. A CD with 44.1 kHz sampling frequency is capable of 44.1/2 = 22.05 kHz max waveform. So a CD recording does not contain the added inaudible frequencies above 20 kHz that though unheard may affect the generation of a perfect waveform on high frequencies (say 20 kHz).

CC Converter Logo

2qmgy.jpg


Question can arise whether human ear can ever perceive such a subtle nuisance in sound quality, but theoretically it exists. This CC Converter LSI tries to counter the above mentioned deficiencies that get embedded during CD/ DVD-Video recording process through its K2 Extended processing algorithms. Below lies the block diagram of a CC Converter:

Block Diagram of CC Converter

a09sur.jpg


The CC Converter is divided into three successive operating sections:

High-bit Expansion: Let us consider a CD recording which contains a linear PCM stereo audio track of 44.1 kHz/16-bit. Here the 16-bit digital signal from CD is first analyzed by K2 processing algorithms. Then K2 tries to deduce the original analog master signal before A/D conversion with its algorithms while preserving the same sound energy of 16-bit signal. After deduction K2 bit-expands the incoming 16-bit digital signal to a 24-bit signal with the help of computed results to smooth out the resultant signal waveform while preserving the sound energy. An outgoing digital signal of 44.1 kHz/24-bit is now formed. Similarly a 20-bit digital signal is also bit-expanded to 24-bit.

Block Diagram: High-bit Expansion Stage

1erl2q.jpg


Frequency Conversion: The second stage performs simple over-sampling with an internal digital filter. It may be two times or four times depending on the incoming digital audio signal. A 44.1/48 kHz signal is over-sampled four times to 176.4/192 kHz respectively. On the other hand an 88.2/ 96 kHz signal is over-sampled two times to 176.4/192 kHz respectively. For a CD the 44.1 kHz/24-bit signal from first stage gets frequency up-converted to 176.4 kHz/24-bit in this stage.

Range Expansion: In the final stage of CC Converter the 176.4 kHz/24-bit digital signal from the second stage is further analyzed by K2 processing algorithms. This time though K2 tries to deduce the original analog master waveform before A/D conversion containing all the added information for multiple high order harmonics required to correctly represent audible high frequencies (say, 20 kHz). It does so with its own exclusive algorithms. Then K2 processing modifies the 176.4 kHz/24-bit digital signal with its own computed results. Finally a 176.4 kHz/24-bit digital signal gets created mimicking the original analog master copy from which the actual CD recording was made. As per Victor/ JVC this processing provides optimum smoothness, reality and 'live' presence reflecting the analog master. Similarly a 192kHz/24-bit signal is treated in the same way.

Block Diagram: Range Expansion Stage

28aubs2.jpg


-----------

What I really appreciate here is the difference in approach taken by Victor/ JVC with CC Converters compared to other high-bit and over-sampling systems found in the market. CC Converter unlike others do not just mechanically bit-expands and add frequencies over a CD recording so as to create a bit-extended & frequency bandwidth expanded signal. On the contrary it has the power to compute the incoming digital audio signal with its Extended K2 algorithms and then re-create a bit-expanded and frequency bandwidth expanded signal on a software level. It then tries to regain the original analog master signal before A/D conversion. Thus CC Converter is a micro-computer running its own embedded K2 processing software which additionally contains a mechanical digital filter. It can up-convert various CD and DVD-Video audio formats as under:

Input -> Output

44.1kHz, 16/20/24 bit -> 176.4kHz, 24 bit
48kHz, 16/20/24 bit -> 192kHz, 24 bit
88.2kHz, 16/20/24 bit -> 176.4kHz, 24 bit
96kHz, 16/20/24 bit -> 192kHz, 24 bit

How much CC Converters succeeded in "restoring sound to its original state" is debatable. Or did they go further away from the truth? One thing for certain, Extended K2 processing algorithms in CC Converters never caught up the market the same way K2 processing algorithms did with their XRCD manufacturing process. Further furnished below is Victor/ JVC own statement regarding their CC Converters:

When an analog signal is converted into digital (A/D conversion), high frequencies -- normally those higher than 20 kHz with CDs -- are removed as dictated by the CD's sampling frequency. Absence of this high-frequency data affects the quality of sound in the audible range. The CC Converter features exclusive algorithms to restore lost signals based on the recorded digital signals of audible frequencies, those frequencies that should have been recorded in the first place. It also uses high-bit quantization to reproduce minute signals. Moreover, in order to precisely reproduce the signals that have undergone such processing, the CC Converter features a broader analog bandwidth (up to 4 times the sampling frequency) extending beyond 20 kHz. This improves the quality of the music data in the audible range. Through high-bit/high-sampling processing, the CC Converter generates expanded digital signals with a quality close to that of the original master. The algorithms of the CC Converter have been verified for their musical legitimacy by studio engineers and musicians through repeated auditions. Because the number of digital sound sources has been growing fast, the CC Converter has proved to be a much-sought-after solution for the faithful recreation of original sound. It also works with compressed data, such as Dolby Digital and DTS formats.

---------------------------------------------------------------------------------------

P.E.M. D.D. Converter

P.E.M. D.D. Converter stands for "Pulse Edge Modulation Differential linearity-errorless D/A Converter". Phew!!! It is actually an advanced variation of the conventional 1-bit DAC that should theoretically eliminate zero-crossing distortion. This JVC exclusive 192 kHz/24-bit DAC also features their own VANS (JVC Advanced Noise Shaper) circuitry which is a 4th-order noise shaper that eliminates noise by shifting it out of the audible audio range and into the inaudible ultra-high frequency range. This DAC LSI incorporates dual P.E.M. D/A converters, thus is a stereo DAC with dual layers of shielding and independent power supplies to prevent Pulse Generator interference of master clock. It is originally manufactured by Panasonic for JVC and is liberally used in all of their products. P.E.M. D.D. Converter review opinions are a mixed bag, some said they are just good while others claimed they are the best 1-bit DACs available in market, very musical and accurate. Below is a diagram revealing its internals:

Block Diagram of P.E.M. D.D. Converter

2viihbo.jpg


---------------------------------------------------------------------------------------

Digital Acoustics Processing (DAP)

A Victor/ JVC exclusive sound-field post processing technology very similar to Yamahas Digital Sound Field Processing. Yamahas DSP technology is just more mature and first implementation can be traced way back in 1986, while DAP is a decade behind. Thus DAP is not as vast, as dense or as accurate as Yamaha DSP technology but is still a much better option than any third part conventional post processing technology used by other AV hardware manufacturers. Both Yamaha & JVC have one thing in common; they both have sound engineers which gives them a subjective edge. So they both sent their engineers worldwide to measure the acoustics of famous concert halls and theaters. Later they both implemented vast amount of DSP computed data taken from actual venues for creation of sound-fields in their AV amplifiers/ AVRs.

---------------------------------------------------------------------------------------------------------------------------------

The Beginning

I can think of Victor/ JVC brand being famous for making televisions, VCRs, camcorders, DVD players/ recorders, CD players/ recorders/changers and automobile AV entertainment. But I can never recollect them to make a foray in AV amplifiers/ AVRs and earn a HiFi pedigree. Their AV amplifiers/ AVRs at best catered low to mid-end segment; priced lower than equivalent models from the big four (Denon, Pioneer, Onkyo & Yamaha). Feature wise they were able to match the big fours offerings, but in terms of sound quality and product quality they lagged a bit behind. With the advent of Uber AV amplifier era from 2000 onwards, the mindset of every electronic consumer companies changed from pole to pole. As market got ready for truly expensive AV amplifiers, their marketing departments started pushing for an expensive model instead of curbing the idea at very inception. It was a hardware engineers dream come true to have free reign to select the best parts from their inventory and produce the best sounding AV amplifier they can ever conceive. Victor/ JVC also followed suite during this Uber wave and gave birth to Victor AX-V7000 in 2001. Retailing at 230,000 yen (excluding tax) in Japan it was their first high-end AV amplifier to justify Top-Of-The-Line [TOTL] status; ready to go head on with big fours TOTLs.

Victor/ JVC sketched a completely new technical design for AX-V7000 which needed some time to smooth its rough edges. It had the sound quality and power output on par with big fours TOTLs but turned out to be a bit down on product quality requiring frequent repair. Victor/ JVC understood this and their lower brand value in AV amplifier market, pricing AX-V7000 significantly lower than TOTLs from other respected brands. For example Yamaha DSP-AZ1 was retailing for 300,000 yen (excluding tax) on the same year AX-V7000 got released. With two additional years of experience they fine tuned this product with additional refinements and improved product quality & reliability significantly and thus Victor AX-V8000 was born in late 2003. This model is generally regarded as their best sounding AV amplifier ever and also their most expensive one, retailing for 350,000 yen (excluding tax) in Japan which currency converted was roughly US $3,000. Knowingly with AX-V8000; Victor/ JVC went to an unchartered territory with performance that matched the TOTLs from the big fours and this time with equal product quality to boot. Unfortunately for them Denon, Pioneer, Onkyo & Yamaha by then had already decided to shift to the next level, the Uber level of AV amplifiers costing 525,000 yen (excluding tax) and above. So AX-V8000 remained at best a great TOTL, I will say in the same level of Yamaha DSP-AZ1 or Denon AVC-A11SR (TOTLs) which by itself was a great achievement for Victor/ JVC. Ubers like Denon AVC-A1SRA, Pioneer VSA-AX10Ai-S, Onkyo TX-NR1000 and Yamaha DSP-Z9 were on a different league though.

Victor AX-V8000

23jljjn.jpg


For the rest of the world Victor AX-V8000 is better known as JVC RX-DP20V. There are slight differences between the two; firstly RX-DP20V is an AVR. Lets be frank here, no one will be willing to pay an equal amount of money for a top of the line JVC branded AVR which one can easily dish out for a Denon, Pioneer, Onkyo or Yamaha. The basic human instinct to link these big four as HiFi brands while JVC as just another electronic consumer company at least in AVR category will surely bug your mind even if all of them had identical performances. JVC must have understood this disparity and thus slightly down-graded the over engineered Uber level chassis of AX-V8000, lower quality speaker terminals and omitting the additional touch screen remote that came with it. Hence the RX-DP20V retailed for five hundred dollars less at US $2,500. No compromises where made to internal electronic components and sound quality which gives us a sigh of relief. RX-DP20V got region wise further divided into two sub-models. Europe got the identical specs and same silver finish of AX-V8000 with just a tuner added in JVC RX-DP20VSL (SL -> Silver). In contrast North America had to live with usual black version in JVC RX-DP20VBK (BK -> Black) but it came with added goodies like Zone 2 support and added RF (Radio Frequency) rod antenna in the AVR. As the supplied main remote supported both IR (Infrared) and RF signals, wall penetrating RF signals from other Zones can be easily sent by this remote to the AVR at a distance of even 50 feet!!! No doubt it was a handy feature for Zone control. To complicate matters even further there came a down-graded version of RX-DP20VBK, this time with lower quality internal components while keeping the specifications intact. The chassis was further down-graded and some functions removed. Known as JVC RX-DP15, it was the cheapest THX ULTRA 2 certified AVR known to man at just US $1,900. For the rest of the post let us concentrate on the top version, the Victor AX-V8000.

--------------------------------------------------------------------------------------

Victor AX-V8000/ JVC RX-DP20V

An AV amplifier/ AVR when looked upon from AV separates point-of-view happen to be an amalgamation of a separate AV processor with a multi-channel power amplifier on a single chassis. Henceforth I have put my views under similar headings and tried to compare "TOTL" Victor AX-V8000 with an Uber Yamaha DSP-Z9 implementation.

Chassis

Victor AX-V8000

Beautifully crafted solid aluminum Front Panel

2qiurgp.jpg


Silver finish solid aluminium side panels for up-market feel and greater chassis strength

1z50m8o.jpg


2mgw477.jpg


Beautifully crafted Top Panel

ndsy9z.jpg


Back Panel

30uzknq.jpg


One of the main distinguishing feature of Japanese Uber AV amplifiers are their un-parallel chassis quality. First the internal chassis is made from heavy gauge reinforced steel sheets for utter strength. Such tough chassis are required when dealing with some ten kilos of mains transformer!!! With further treatment this chassis came fully copper plated or black anodized. This ensured maximum heat dissipation and reduced chassis impedance. These are not just a single box as found in now-a-days AV amplifiers; and have fully insulated multiple chambers to prevent internal interference between internal digital & analog circuits. This internal chassis is further complemented with beautifully crafted brushed aluminum finish front, side and top panels. This not only provides an up-market feel but most importantly further strengthens the internal chassis for maximum strength and vibration damping. General statements from Uber manufacturers were It would take a meteor to wipe this out asserting the titanic strength of the chassis. A notch below, TOTLS from the same manufacturers never enjoyed this level of chassis quality bar few. Victor AX-V8000 is one such TOTL to enjoy near Uber level chassis quality which is simply astounding. The other TOTL I can think of is Yamaha DSP-AZ1. To start with AX-V8000's internal thick chassis is fully copper plated. It is further divided into five main chambers to prevent internal interference.

JVC RX-DP20VSL: Internal View [Europe model]

2dh7ajt.jpg


1 -> Analog Power supply chamber
2 -> Analog 7-channel Power amplifier chamber
3 -> Analog Video and Audio Chamber
4 -> Analog Audio Chamber
5 -> Digital Audio Chamber

One notable feature is the inclusion of a solid 1.6 mm thick transformer base plate to which the three power transformers are mounted. Due to their combined weight of over 9 kilos; special attention was required for stress concentration in the chassis. The other notable feature is in the use of three feets instead of conventional four in the chassis base. Quite unique as it was, it does provide the perfect balance with no wobble as the ends of the three feet always form a plane. In a completely flat plane though the four feet base will have an advantage as center of gravity will be shifted further inside providing better stability. This internal chassis is then complemented with silver finished aluminum front, top and side panels. They are not as exquisitely crafted as Ubers but still definitely provided an up-market feel with added chassis rigidity. Another quite noteworthy feature of AX-V8000/ RX-DP20V is the fully motorized front panel door that opens in two stages. As the power is turned on, the front panel door will automatically move down a little to reveal the source selection buttons. If you turn it off the front panel door moves up automatically to close!!! During operation the door can be further opened by pressing the door down button situated at its right side to revel additional control buttons.

Step-1: Front Panel Door Closed

5yhg6w.jpg


Step-2: Front Panel Door is half opened to reveal source selection buttons

24xjuba.jpg


Step-3: Front Panel Door is fully open to reveal all buttons for operation

dr5bi0.jpg


ir6rg1.jpg


The paramount chassis quality of AX-V8000 took a slight dip in sister JVC RX-DP20V models. Two internal copper braces running from back to front just below the top panel to provide additional rigidity and flex control was removed. The aluminum top and side panels were replaced with a single cheaper steel cover as found in other TOTLs. The combined effect was a less costly chassis but with some added flex & less rigidity. Mind you the RX-DP20V is still rock solid AVR by todays standards, but it was not lucky enough to receive the over-engineered chassis of AX-V8000. These measures were one of the main reasons why RX-DP20V models retailed five hundred dollars less. But it did have four feet.:)

Victor AX-V8000: It had additional copper braces for rigidity

2dtrrso.jpg


Victor AX-V8000: Third feet

swcrix.jpg


JVC RX-DP20VSL: A simple silver finished steel cover

4kxlon.jpg


JVC RX-DP20VSL: Europe model had four feet, note the fully copper plated chassis

2ytobgz.jpg


-----------------------------------------------------------------------------------------------------------------------------------

AV Processor

Audio

Multi-channel Inputs (Analog/ Digital): I am truly overwhelmed by how much AX-V8000/ RX-DP20V has in offer for its asking price. A Yamaha DSP-Z9 in 2004 would cost you US $4,500 brand new while a JVC RX-DP20VBK comes for as little as US $2,500. It was truly a value-for-money TOTL. As expected I found huge differences between an Uber and TOTL implementation in regards to electronic components used which creates the performance difference, there must be one at an US $2,000 price gap. Uber DSP-Z9 follows a more pure and holistic approach, an excessively over-engineered product with top-spec electronic components. The total focus on sound quality, the sheer number of components used and their detailed implementation to retain audio fidelity or video quality will make your jaw drop with awe. TOTLs on the other hand take a different approach and are well engineered products using components in the audio/ video path as and when required, it is as per needs basis with some cost cuttings being evident. AX-V8000 falls in such a group of TOTLs along with competitors like Yamaha DSP-AZ1 and Denon AVC-A11SR. A TOTL will always have selective performance per channel type, the fronts getting maximum attention with higher quality components while center, surrounds, surround backs & subwoofer gets secondary treatment to save hardware cost. Such differences in audio fidelity per channel type is understandable and are followed by every AV amplifier manufacturer now-a-days. The AX-V8000s audio chain from EXT 7.1 channel analog inputs to 7.1 channel pre-outs will contain 24 op-amps, 3 ADCs, 1 DSP micro-computer with 2 memory modules, 4 DACs, 4 volume controllers and 8 muting transistors. These are quite respectable numbers for a 7.1 channel audio chain. For the same channels DSP-Z9 kills AX-V8000 with its sheer numbers of components used by implementing 52 op-amps, 4 ADCs, 9 DSP micro-computers with 10 memory modules, 6 DACs, 9 volume controllers and 22 muting transistors!!!

Victor AX-V8000

All Gold plated Digital, Analog and Video Inputs/ Outputs

2e6d0qx.jpg


Full Copper plated 5-chambered internal chassis

xml46c.jpg


Upon comparing with the league of other TOTLS of its time AX-V8000 contains a better AV processor section in terms of both additional functionality and flexibility. I am not here to fall in the subjective domain of sound quality; let it rest until I hear an AX-V8000. To start with all audio and video input/outputs terminals in AX-V8000 are gold plated like DSP-Z9. The co-axial/ Tos-Link digital audio inputs first pass through an AKM AK4112B digital audio interface receiver (DIR) for source selection. This DIR is capable of handling digital audio signals of 96 kHz maximum sampling frequency at up to 24-bits. So nothing over 96 kHz/24-bit gets supported. The selected input signal from DIR then reaches a 32-bit Aureus TMS320DA610 (DA610) DSP micro-processor from Texas Instruments. As I remember this DSP chip used to be the most powerful of its kind back in 2003 ~ 2005 and AX-V8000 was the first AV amplifier in the world to implement it. While other well known DSP chips like SHARC Melody Ultra ADSST-21161 from Analog Devices had their cores running at 100MHz churning out 600 MFLOPS, this DA610 was capable of 225MHz having a computing power up to 1200 MFLOPS. Being two times as powerful as a SHARC, only one was good enough to perform both audio decoding as well as post processing activities in AX-V8000. Implementing such a powerful DSP allowed AX-V8000 to attain Uber level DSP processing at 96 kHz sampling frequency while its competitors were still limbering at 48 kHz. As processors need memory to work; DA610 used 8 MB of RAM from Samsung (K4S641632F) and 2 MB ROM from SST (SST39VF160) in order to perform various decoding from Dolby & DTS, post-processing and JVC Digital Acoustics Processing (DAP). No auto acoustic calibration was supported which should have required another DSP micro-processor.

A single Texas Instruments Aureus TMS320DA610 (DA610) DSP micro-processor is used

24qohg7.jpg


Turning back the attention to DSP-Z9; the digital audio inputs first pass through a DIR from Sanyo (LC89057W-VF4-E) for source selection. This DIR is capable to handle digital audio signals of 192 kHz maximum sampling frequency at up to 24-bits. The selected input signal from DIR then reaches a 32-bit SHARC Melody Ultra ADSST-21161 DSP micro-processor for audio decoding. It has its own memory of 8 MB of RAM (Winbond W986432DH) and 2 MB ROM (Fujitsu MBM29LV160BE). Next followed a swarm of YSS-930s; a Yamaha exclusive DSP micro-processor for their own Yamaha Digital Sound Field Processing and YPAO (Yamaha exclusive auto-acoustic calibration). Four YSS-930s tied to four 512 KB static RAMs (Cypress CY7C1041CV33) teamed up to perform post-processing activity. The final result is then acoustically calibrated by a second team of four YSS-930s with another four 512 KB static RAMs (Cypress CY7C1041CV33). In the end the DSP-Z9s DSP implementation does look monstrous in comparison to AX-V8000 or for the matter any TOTL. In my knowledge it is still the most elaborate, powerful and expensive implementation of any Uber from 1st and 2nd generations. [Note: In one of my previous posts I wrongly quoted DSP-Z9 to use 16 MB of static RAM for post-processing and 16 MB for auto acoustic calibration. I was wrong as it actually uses 2MB for post-processing and another 2 MB for auto acoustic calibration. Similarly I wrongly quoted DSP-Z11 to use 32 MB of RAMs for post-processing and 16 MB for auto acoustic calibration. It is actually 4 MB RAM (twice of DSP-Z9) for post-processing and another 8 MB for auto acoustic calibration. But the end result after correction still remains the same, DSP-Z11 used twice as powerful DSP micro-processor with twice the memory of DSP-Z9 for post-processing activities.]

Victor AX-V8000

4hw5yu.jpg


2ynm5gh.jpg


Victor AX-V8000 had two Remotes [Optional touch-screen remote]

30adoqf.jpg


JVC RX-DP20VSL came with a single Remote

2u5qnbk.jpg


JVC RX-DP20VBK came with a single Remote

2m67rzk.jpg


Victor AX-V8000 did perform normal decoding of Dolby Digital/ DTS on both their 5.1 and 6.1 channel variants. It is also THX Ultra 2 certified which to me is real deal. This implies paramount importance to sound quality was provided during development phases of this AV amplifier to meet the highest THX standard aka Ultra 2. An additional bonus of such a certification is assurance of real grunt from all those seven equally powered audio channels. Speaking of flexibility AX-V8000 has two multi-channel analog inputs instead of one. You can easily connect a BD player to EXT 7.1 channel analog inputs while any other 5.1 channel analog source can be connected to its DVD-IN 5.1 channel analog inputs. If the EXT 7.1 channels are used then the eight analog input voltage signals are first filtered by four JRC NJM5532 dual op-amps in single-ended configuration. These are renowned op-amps known for their audio quality and as we will find out later AX-V8000 uses them liberally. In a single-ended configuration (abbreviated as single-ended) a single discrete stereo ADC/ DAC/ Volume Controller/ operational amplifier (op-amp) is used to handle two audio channels, which tends to be the simplest and cheapest implementation. On the other hand if DVD 5.1 channel analog input is used then these six analog voltage signals are treated with two NJM5532 (single-ended) for the fronts and center/ subwoofer channels while surrounds had to deal with a lower quality JRC NJM4580 dual op-amp (single-ended). In the next step both multi-channel inputs merge to a single lane where the front two channels gets an additional pre-conditioning by two JRC NJM4580 in differential configuration. In a differential configuration (abbreviated as differential) a single discrete stereo ADC/ DAC/ Volume Controller/ operational amplifier (op-amp) is configured to handle a single audio channel rather than two, which tends to produce better performance at the cost of design complexity and price. Now comes the biggest shock to find even though AX-V8000 fully supported 7.1 channels analog inputs, DSP processing is only performed over 5.1 channels!!! This means the rear surround analog channels from EXT 7.1 input never reaches the digital domain where DSP micro-computers reside, thus no post-processing or bass management is performed over it. Instead the surround back channel remain in analog domain and continues its path towards the pre-outs and then to power amplifier. Why Victor/ JVC refrained from a full blown 7.1 channel DSP processing is a big mystery to me. It required just an ADC for surround backs, the implemented DA610 micro-processor is fully capable of 7.1 channel processing over 96 kHz/24-bit. All I can think of is maybe Victor/ JVC thought there were no 7.1 channel formats like DTS-HDMA or Dolby True HD as of today and at those times DVD/ SACD players had only 5.1 channel analog outs. Thus only 5.1 channels from both inputs (EXT 7.1 & DVD-IN 5.1) get analog to digital converted. As with all TOTLs primary importance is provided to the front channels where a high quality 192kHz/24-bit Cirrus Logic CS5361 stereo ADCs (single-ended) does duty delivering 114 dB dynamic range. The rest four channels (center, two surrounds and sub-woofer) have to be content with two 96kHz/24-bit Cirrus Logic CS5333 stereo ADCs (single-ended) capable of only 98 dB dynamic range. Mind you all ADCs are pre-configured to work at a constant rate of 96 kHz/24-bit to feed the DSP micro-computer.

JVC (JCV8006) CC Converters are used

fkxtz4.jpg


JVC MN35505 DAC

if7g38.jpg


It is truly satisfying to see Ubers like DSP-Z9 does not budge on audio quality for any of its eight analog audio input channels over EXT 7.1. In first phase these eight analog input voltage signals are filtered by eight JRC NJM2068 dual op-amps (differential). These are renowned op-amps and can be found to be liberally used in others Ubers as well, Denon AVC-A1SRA, Pioneer VSA-AX10Ai-S to name a few. A second phase filtering is then performed by four NEC uPC4570 dual op-amps (single-ended) followed by a third phase of filtering by four NEC uPC4574 quad op-amps (differential). Notice the multiple phases of filtering by DSP-Z9 to retain the incoming signal purity on all its 7.1 channels at the same high level. Then it uses the same high quality 192kHz/24-bit Cirrus Logic CS5361 stereo ADC (single-ended) on all 8 channels which AX-V8000 reserves for the fronts only. Thus 114 dB dynamic range is maintained throughout the 8 channels, all pre-configured to work at a constant rate of 96 kHz/24-bit to feed the nine DSP micro-computers. Coming back to AX-V8000 the six analog audio channels (except for rear surrounds) after analog to digital conversion reaches the DA610 micro-processor where post processing activities like THX Ultra 2, bass management, parametric equalization and Digital Acoustics Processing (DAP) are performed. AX-V8000 also come with some additional merits while using such a powerful DSP micro-processor. One such is the memory settings against each input source (say a DVD source or a CD source, etc) where you get the opportunity to set up each input source with its own set of parametric equalizers settings, default volume level, default DSP mode, which type of input source is to be used for that source (analog or digital), etc. It is truly a remarkable feature as different audio sources have different characteristics and intended use, so the user have complete control to set it up accordingly. Audio delay up to 200 ms is provided when watching movies. AX-V8000 has no auto acoustic calibration which is quite understandable as at those times only Pioneer and Yamaha had the knowledge and wealth to develop the software required for it. Next comes the famous implementation of JVCs own Compression Compensative Converters (CC Converter) to improve sound quality. The eight digital audio channels from DA610 are used to feed four of these stereo CC Converters (JCV8006) in single ended configuration. These CC Converters depending upon the incoming sampling frequency from DA610 up-converted audio signals to 176.4 kHz or 192 kHz at a constant bit depth of 24-bit. Finally the up-converted eight channel signal from CC Converters is fed to four of their own P.E.M. D.D. Converters in (single-ended) for digital to analog conversion. These are 1-bit stereo DACs capable of 192 kHz/24bit resolution, better known for JVC MN35505. Even though the CC Converters were introduced with much fanfare by Victor/ JVC in their AV amplifiers and a lot was expected out of them, during THX Ultra 2 certification process on AX-V8000/ RX-DP20V these converters were found to introduce a negative impact on the final sound quality when measured objectively. Thus THX negated the use of CC Converters when any THX mode gets engaged. Questions still pertains regarding use of such converters and their real advantages for improving the sonic experience. Some claim to obtain a more natural sound field with them from any source. I feel the improvement in audio fidelity if any has to be measured subjectively with CC Converters as the whole concept of K2 processing technology is based on subjective evaluation. Until I hear an AX-V8000/ RX-DP20V I personally cannot comment any further. The DSP-Z9 on the other hand kept it simple and neat after DSP processing with no discrete digital filters or converters on board to improve sound quality. It just used the most expensive and performance oriented DAC from Burr-Brown lineup. Six 192kHz/24-bit Burr-Brown PCM1792 stereo DACs line up for its eleven audio channels as the center channel gets differential mode while the rest are in single-ended configuration.

Victor AX-V8000

Four CC Converters team up with four P.E.M. D.D. Converters (DACs)

2089zd5.jpg


P.E.M. D.D. Converters (JVC MN35505)

o9mpso.jpg


Next in line comes a very important stage of the audio signal chain which can dent the sound quality considerably if not handled correctly by proper designing. I am talking about the current to voltage conversion (I/V Conversion) from DACs and their subsequent filtering phases. The I/V conversion stage of AX-V8000 included the use of four NJM5532 (single-ended) for the eight analog audio channels from JVC MN35505 DACs. Note the difference here as DSP-Z9 being an Uber not only uses more expensive and better performance oriented dual op-amp by the name OP275 from Analog Devices for this stage but it also drops the cheapish single ended for more performance oriented differential configuration. The center getts an even more exclusive treatment in dual-differential setup. The Denon AVC-A1SRA also uses this renowned op-amp for the same purpose. In a dual-differential configuration (abbreviated as dual-differential) two discrete stereo ADC/ DAC/ Volume Controller/ operational amplifier (op-amp) are configured to handle a single audio channel rather than four, which tends to produce even better performance at the cost of design complexity and higher price. Thus twelve OP275 are implemented by DSP-Z9 for its eleven audio channels. Returning back to AX-V8000 for the next filtering phases after I/V conversion, two higher quality NJM5532 (differential) for fronts are used along with a NJM5532 (differential) for center. The surrounds and surround backs gets two cheaper NJM4580 (single-ended). Subwoofer channel gets a NJM4580 (differential). In the second phase fronts get further treatment from a NJM5532 (single-ended) while surrounds and surround backs had to do deal with two cheaper NJM4580 (single-ended). In the third phase it is only the fronts that get a final treatment with a NJM5532 (single-ended) before all eight channels head towards the digitally controlled analog volume controllers. So the selective precedence of AX-V8000 or for the matter any TOTL for fronts followed by center & surrounds gets clearly evident from its implementation. On the contrary DSP-Z9 again provides equal treatment to all its eleven channels in its first phase of filtering after I/V conversion stage by using nine NJM2068 dual op-amps mainly in differential configuration. Only the two presence and two subwoofers channels have a NJM2068 (single-ended) each. In the second filtering phase the fronts have a pair of high quality OP275 (differential) and presence a NJM2068 (single-ended) all heading towards the volume controllers.

The volume controllers used in AX-V8000 are four stereo Toshiba TC9459F (single-ended) for the eight audio channels. This controller does volume control in 1 dB steps which are ok for general use, but an even fine grained control of 0.5 dB steps would have been a welcome. DSP-Z9 does just that at a much higher level in differential implementation of volume controllers to cease minute distortion generated by these attenuators. Seven of their own Yamaha YAC520 stereo volume controllers does duty for the main seven channels (differential) while the rest two presence channels and stereo subwoofers gets a YAC520 each (single-ended), making it nine in total. If you are reading still now, you have already traveled the path where analog EXT 7.1 channel inputs signals being filtered are fed to ADCs to step up in digital domain where they gets processed by DSP micro-processors and later gets fed to the DACs so as to return to analog domain only to be voltage converted and again filtered and then sent to volume controllers. Phew!!! How far are the pre-outs then? For AX-V8000 they are quite close as a final set of four NJM5532 (single-ended) takes care of the eight analog output signals from TC9459F. The fronts receive an additional treatment from a NJM4580 (single-ended) and then all seven channels are passed through seven Sanyo 2SC3576 muting transistors while the subwoofer gets an unknown Rohm 2SD2144 before submitting to 7.1 channel pre-outs. For DSP-Z9 there is still some way to go as some additional extra efforts are made to retain the audio fidelity as much as possible from the inputs. In the first batch four OP275 (single-ended) for the eight channels are used. The remaining center channel and two presence channels get an OP275 (differential) and a uPC4570 (single-ended) respectively. It even has a second phase of filtering here, an indication of excess engineering. Here four NJM2068 (single-ended) are used for the same eight channels. The remaining center channel and two presence channels get a NJM2068 (differential) and a uPC4570 (single-ended) respectively. Again crunching the numbers DSP-Z9 uses not one but two Toshiba 2SC3326 muting transistors per channel, twenty two in total for the eleven channels before submitting to 9.2 channels pre-outs!!! For both the AV amplifiers the main seven channels (plus two additional presence channels for DSP-Z9) from the pre-outs then takes the journey towards the power-amplifier domain.

Other notable mentions are the rotary optical encoders and electrolytic capacitors used in these AV amplifiers. These rotary encoders are electro-mechanical devices that sits behind the big volume knobs of these AV amplifiers. There are no analog potentiometers here; we are dealing with digital data produced by these encoders as we turn the volume knob clockwise or anti-clockwise so as to digitally control the analog volume controller ICs situated in the circuit boards. AX-V8000 uses an Alps rotary encoder (unknown part number QSW0867) to control its four Toshiba TC9459F, while DSP-Z9 comes with a Noble REB162 to control its nine Yamaha YAC520. The REB162 is a top of the line rotary encoder from Nobles lineup, comes with a metal shaft rather than plastic one with resolution of 24 pulses per 360 degree spin and a minimum rotational life of fifty thousand cycles. This means during operation if you rotate the volume knob of DSP-Z9 full 360 degrees three times a day which is roughly equivalent to some 50 volume adjustments done per day (we hardly move the volume knob past 20 degrees at a time for volume up or down); then the REB162 have a minimum rotational life of half a century!!! Regarding the use of electrolytic capacitors in DSP-Z9, it uses Nichicon MUSE series throughout. These are the highest grade audio electrolytic capacitors offered by Nichicon and are the most expensive. Different variants of MUSE series can be found throughout the DSP-Z9 like Fine Gold, Gold Tune and Super-through variants having different intended use. As these complex AV amplifiers use a hell lot of capacitors, the total hardware cost of the product is greatly affected by them. On the other hand Victor AX-V8000 being a TOTL selectively uses the highest grade Nichicon MUSE audio capacitors in few places where absolutely necessary and can significantly affect the audio fidelity. Elsewhere all medium grade Nichicon capacitors are used.

Rotary optical encoders

Victor AX-V8000

9fy9nk.jpg


Yamaha DSP-Z9

25ilkpc.jpg


Pure Direct/ Analog Direct: Analog lovers may also rejoice as these AV amplifiers takes utmost care with two channel analog audio in the most direct way from the analog inputs to the power amplifier. Fewer the number of components used in the chain the better it is. The most minimalistic 2-channel analog audio chain I can ever think of contains an analog input to the stereo volume controller followed by two muting transistors leading to the power amplifier with some op-amps thrown in. The AV amplifiers with so many different types of supported inputs use many solid state transistor switches acting as relays to route their signals. These transistor switches may induce little noise or distortion to the analog signal, so for these direct chains they try to avoid them as much as possible ending with one or two at maximum. From pure performance point of view, these cheap transistor switches can even be replaced with mechanical relays with gold contacts (generally found in high-end stereo amplifiers) but this increases the cost exponentially. Victor/ JVC calls this kind of direct analog chain as Analog Direct in AX-V8000. Considering any two channel analog source (say CD input) in AX-V8000, this analog input is first filtered by a NJM5532 (single-ended) followed by two transistor switches (JVC QSK0112) one after the other. Now a stereo volume controller Toshiba TC9459F (single-ended) is then used followed by a second and third phase filtering by a NJM5532 and a NJM4580 respectively. Finally a pair of Sanyo 2SC3576 muting transistors are used leading to the pre-outs and then to power amplifier. Ubers like DSP-Z9 takes analog stereo even more seriously and has a special 2-channel Pure Direct analog input dedicated for this purpose. For Pure Direct mode they are also able to reduce the number of switches to just one and then used an expensive mechanical relay with internal contact material made of silver alloy with gold alloy overlay. Op-amps and volume controllers are implemented in a more expensive way by following differential configuration. Thus in DSP-Z9 stereo analog signal from Pure Direct input is first filtered by a pair of NJM2068 (differential) before passing through a NEC EC2 mechanical relay. The selected output of this relay switch is fed to a pair of Yamaha YAC520 volume controllers (differential). After this a second & third phase of filtering takes place with an OP275 followed by a NJM2068. Finally a pair of Toshiba 2SC3326 muting transistors are used per channel leading to the pre-outs and then to power amplifier.

Headphone: The headphone treatment in Victor/JVC AX-V8000 is not up to the mark as it is clear from very onset that the headphone application is treated as a secondary aspect. This is a common concept most AV amplifiers. As such it makes use of the cheapest implementation possible by taking the amplified power output from power amplifiers and then apply a pair of 470 ohms resistors to drive the headphones. So the only shield between those tiny speakers of your headphone and over 100 watts of power per channel is the aforementioned resistors. If these resistors go berserk you end up with a pair of fried headphones. On the other hand DSP-Z9 being an Uber at least tries to give a proper headphone amplifier treatment. Here the front analog channel is taken up just before they meet the muting transistors and goes to pre-outs. The front channels then follow up to a separate discrete headphone amplifier circuit board where a pair of Toshiba 2SC2878 muting transistors for headphones is used. The signals then head towards the headphone power amplifier section. At first some capacitance is provided to deal with the peaks at very high headphone listening levels and then a JRC NJM4556A dual op-amp in single-ended configuration is used as the headphone driver. The NJM4556A is built for audio applications while specifically keeping headphones in mind. It is a high current output op-amp capable to deliver 70 mA of current per channel and good for headphones up to 150 ohms load. Having heard the sound of DSP-Z9 over a pair Sennheiser HD518, I must admit the sound is smooth and pleasant to listen, very detailed and by no means harsh.

Video

Victor AX-V8000 has composite, S-Video and component video inputs/ outputs, limited to video switching capabilities. Any video received through composite or S-Video will be converted and sent to the component monitor outs. The components are also HDTV complaint and are able to pass 720p/ 1080i max. DSP-Z9 does just that but adds another dimension to it by including video up-scaling feature, so a 320i video from composite will be converted to 320i component video format and then up-scaled to 720p via component outs.

------------------------------------------------------------------------------------------------------------------------------------

Power Amplifier

Victor/ JVC went to great lengths in order to unsure sound quality remains as pure as possible with AX-V8000. In an AV amplifier there are generally three kinds of signals namely: analog audio signal, digital audio signal and video signal. Problem arises when these three different kinds try to interfere with each other degrading sound as well as video quality. One way by which AX-V8000 countered this is by providing five isolated internal chassis chambers for different kinds of signals. Then it takes a step further and uses independent power supplies for each of them. So the power supply chamber of AX-V8000 contains three independent EI-Core power transformers with their own rectifier circuits. The transformer dedicated for analog audio signals weighs roughly 8.5 kilos to provide the juice required running the analog boards and more importantly the THX Ultra 2 certified seven channel power amplifiers. The use of a thick 1.6 mm copper plated base for these three transformers only affirms their massive combined weight which must be over 9 kilos. Frankly I never expected such a level of dedication for audio fidelity from a US $2,500 AVR, but Victor/ JVC opened my eyes. Result: better sound quality. Another noteworthy mention is the rectifier circuit design for the power amplifier. AX-V8000 follows a drastically different approach which I have never encountered on any other AV amplifier. If you look at DSP-Z9, its massive toroidal transformer dedicated to power amplifier is complemented with a single rectifier circuit containing a pair of Nichicon Super-through power capacitors with combined capacitance of 56,000 uF, 80V. Each of the main seven powered channels of DSP-Z9 (omitting the two powered presence channels as of now) is fully dependent to this common rectifier circuit and its provided capacitance. Victor/ JVC tried to take this concept a step higher by implementing channel independent rectifier circuits with their own capacitance to counter any interference between multiple channels. So the seven powered channels of AX-V8000 ends up with seven independent rectifier circuits and their own pair of Nichicon 3,300uF, 80V power capacitors. This comes up to 6,600uF per channel and 46,200uF of total capacitance. Though a more pure concept it comes with its own advantages and disadvantages. Theoretically this approach should provide better channel separation. But now as each channel is bound to its own 6,600uF of capacitance or 13,200uF for stereo operation it will never contain the boundless dynamic power or bass power that DSP-Z9 can provide for a speck of a second during stereo playback at extremely high volumes with its common 56,000 uF of reserve. But then again we are talking about a rare scenario. In the end Victor/ JVC deserves appreciation for at least trying something different to elevate sound purity. I personally give them full marks for this effort.

Victor AX-V8000: Top Internal View revealing 7 pairs of power capacitors for 7 powered channels

30dfbxh.jpg


JVC RX-DP20VSL

Mains Power transformer can be seen

ta37s8.jpg


Power Capacitors: A pair of Nichicon 3,300uF, 80V per channel

35a4o6c.jpg


For the analog Class-AB power amplifiers of AX-V8000, Victor/JVC implemented their Dynamic Super-A technology. This technology is related to their power amplifiers. Class-A power amplifiers requires their power output transistors to be always on. This result on very low efficiency & high production cost. But the sound is unmistakably smooth with very low distortion. Class-AB amplifiers found in most AV amplifiers/ AVRs behave like this when they are in Class-A mode for the first few watts. But as they switch to Class-B mode in need of higher efficiency and greater power output, they constantly start to switch the power transistors on & off. This sometimes leads to increase of distortion resulting in a metallic & harsh sound. To counter this all AV amplifier manufacturers at least on their TOTL models apply some constant idling current on the power output transistors to prevent them from completely switching off. Thus the sound remains smooth even in high power Class-B mode having less switching distortion than pure Class-B. But it comes in expense of some efficiency which is manageable with the huge power supplies implanted in TOTLs. Victor/ JVC call their take on this type of technology as Super-A. For this they use their own IC chip known as Super-A chip. Dynamic Super-A further extends the Super-A concept and provides additional refinements to manage the vast dynamic range of new digital audio formats like DVD-Audio & SACD. When the seven analog audio signals from AX-V8000s pre-outs reach the power amplifier chamber from below they feed the four separate driver circuit boards for the seven channels of the power amplifier. Each driver board takes care of (front left/ surround back left), (front right/ surround back right), (surround left/ surround right) and (center) channels. It is in these driver boards a JVC VC5022 (Super-A IC chip) per channel is implemented.

JVC Super-A IC

214cymc.jpg


Victor AX-V8000

THX Ultra 2 certified Power amplifier view from below, note the 1.6 mm thick base provided for the triple power transformers

2s9rdwh.jpg


The four Driver Circuit Boards for the Power Amplifier

11ipzli.jpg


In the end of the power amplifier chain a pair of Sanken 2SA1494/ SC3858 power transistors are used per channel on +/- 63 volt rails. These are 200 watt devices in single configuration. AX-V8000 is manufacture rated to produce:

@ 8 ohms: 120 watts X 2 [@ 20Hz ~ 20kHz @ 0.02%THD]
@ 6 ohms: 150 watts X 2 [@ 20Hz ~ 20kHz @ 0.03%THD]

So even under 6 ohms load while delivering 150 watts per channel in stereo, it just has 50 watts of overhead. In contrast DSP-Z9 uses two pairs of Sanken 2SA1492/ 2SC3856 on +/- 65 volt rails. These are 130 watt devices in dual configuration, 260 watt in total per channel. At 6 ohms load while delivering 200 watts in stereo it has just 60 watts of overhead. This again signifies the mindset of Japanese manufacturers targeting a minimum loudspeaker impedance of 6 ohms with limited overhead left to spare to decently perform at 4 ohms load. That said I have seen DSP-Z9 to pull nine hulking Axiom Audio towers (4 ohms rated) all around at extremely high volume levels for sustained amount of time without breaking a sweat. I assure AX-V8000 to be no different. In this entire post you may have found me to repeatedly sing praise regarding the purity in design concept of AX-V8000. This continues in power amplifier domain too as all the seven power transistors with negative polarities (Sanken 2SA1494) are bolted to one heatsink while the other matching seven power transistors with positive polarities (Sanken 2SC3858) are bolted to the other heatsink. This separation of positive and negative voltages on power transistor level is made to improve channel separation and provide better sound purity. The dual solid aluminum heatsinks used here are huge by any AV amplifier standards while being black anodized for maximum heat dissipation. This being a THX Ultra 2 certified internal power amplifier can only mean good and comes with high quality banana-plug speaker terminals for AX-V8000. The total heft of AX-V8000 at 25 kilos further confirms its high current power output capability.

Victor AX-V8000

High Quality Speaker Terminals

2nkjlm0.jpg


w17295.jpg


250qfe0.jpg


Victor AX-V8000: Angular View

2a8kb5d.jpg


s5k013.jpg


Conclusion

I find both Victor AX-V8000 and JVC RX- DP20V to be tremendous value for money TOTLs. They are great sounding AV amplifiers/ AVRs with good flexibility and gobs of power. Since I have not personally heard them in action I will end by post with a link to the review page of RX-DP20V performed by Sound&Vision. This review will provide you a measure of its sound quality and capabilities.

Link: Sound&Vision Review: JVC RX-DP20V

Enjoy!!!
 
Every time I read your post I feel 10x smarter. I will add just one word to your recent post: AWESOME :clapping:

+1 to all 3 sentiments.
JVC made a HT monster ... how is it that I dont know about it ??? Oh yea, I buy stuff from my local 100 mile circle and they are clueless. I have had some awesome JVC equipment in the past though including a JR 601 I fixed several yrs ago and it died has to get something else done again. And the QL Y5F TT.

Anyway, the Z9 that was turning itself off - I tightened the screws to the speaker posts on the back and it stopped doing that. Somehow the speaker posts had got loose-ish. This is turning out to be a real problem in that one. I may open it find the exact contact point, clean it and add some solder to it so it makes contact better.

The non dropped Z9 is not showing symptoms of turning itself off. Likely the drop and my subsequent "repair" rattled something loose.

Anyway the Z9 isn't so far driving anything to the point of impressing me. I tried carver amazings and it still sounds rather ordinary.
I think I need to keep looking and when I find its perfect match, I've got to keep them together.

And I managed to find an RX-V1 cheap. I am hoping I find out some good info about its sound cos the Z1 and Z9 are based off the V1's sound.

Cool.
Srinath.
 
My biggest issue with this amp seems to be the varying disparities in volumes between various stages of movies.
For example, I launch Netflix running out of the Wii and you see how it thumbnails etc etc while playing music, and I'd find it loud @ -35 dB.
Then the titles appear and it seems OK @ -35 db. Then the movie starts etc and I find it near impossible to hear dialogues and sounds till I crank it to -15dB. When it ends and I go back to the main screen of Wii and its way too loud @ -15dB, it needs to be back @ -35dB. It also really sounds loud and jarring or inaudible when watching programs with comercials. Comercials are 25-30dB louder than the program.

What could be happening, and why didn't it happen with other amps like my dsp 3090 or the onkyo 909.
Thanks.
Srinath.
 
Check out our special offers on Stereo Package & Bundles for all budget types.
Back
Top