UpperCut
Active Member
The (Musical Box) project came to mind a few weeks ago when some of the community Artists in our workshop were asking if I could build something for the use in our Workshop or outside when we had our NZ Hangi / Barbeques were anybody could submit their own music over a powerful speaker set up through their phone or tablet, laptops, USB etc. rather then just playing it on the same devises only.
Well, here we have it! As always build with the I.S.C.T method, and with all driver chassis easily to be exchanged if needed which was important for me to test and try out different configuration. Presently Im looking at the Tang Bang Woofers 8 Inch to try out and which is arriving any day now from PE or an 8 Inch D8G Hi-Vi which I have already, next two 6 x 9 - 1200 Watt Lanzar already run in & used in other project build ups before. Now to top it of I will have two 10 Inch Passive Radiators mounted in the woofer section, but will keep this time the 6 x 9 sections as sealed compartments because I will have plenty of Volume available for all of them to keep changing things around.
One of the Images is showing the rear compartment which will house the electronics like as seen two 24, 36, 48 Volt power units for the amps which are all about the same size as the power units and of the same manufacturer. There will be more like Bluetooth, Volume control, cross over etc. but not quiet sure as yet if everything will fit ..
Updates will be posted as I go!
Rgs UpperCut
Well, here we have it! As always build with the I.S.C.T method, and with all driver chassis easily to be exchanged if needed which was important for me to test and try out different configuration. Presently Im looking at the Tang Bang Woofers 8 Inch to try out and which is arriving any day now from PE or an 8 Inch D8G Hi-Vi which I have already, next two 6 x 9 - 1200 Watt Lanzar already run in & used in other project build ups before. Now to top it of I will have two 10 Inch Passive Radiators mounted in the woofer section, but will keep this time the 6 x 9 sections as sealed compartments because I will have plenty of Volume available for all of them to keep changing things around.
One of the Images is showing the rear compartment which will house the electronics like as seen two 24, 36, 48 Volt power units for the amps which are all about the same size as the power units and of the same manufacturer. There will be more like Bluetooth, Volume control, cross over etc. but not quiet sure as yet if everything will fit ..
Updates will be posted as I go!
Rgs UpperCut
