I have got my unit delivered yesterday and I quickly mounted it on my tripod to test how it works. The setup is a breeze and you can get into action under 5 mins.
This is more an out of the box setup projected on bedroom wall (cream color) between 10am-12pm with window covered and room door wide open. There is enough light in room and I have uploaded the photos of setup taken without flash.
Every setting on the projector left untouched except the lamp saving level which i kept at Medium (default is maximum meaning slightly dim picture but not that much, see the photo)
I have downloaded few video samples from Video Samples | DivX.com and from you tube to view off a USB Stick.
This is basically to visualise how the projector does and everyone else can easily compare to the original work (one should download these locally and watch it over a PC to come to conclusions). This is something I was missing in this forum... In all reviews the pictures uploaded are good but against what source they are shown as uploaded is something
not clear which i tried to fix here.
I have also taken a video out of couple of files which i uploaded to you tubewhich gives a fair idea of how the experience is, the audio is right outof the projector which is sort of ok but no where near any quality audio system like a AVR (which is obvious) but is sufficient for a couple to watch a movie in bedroom with every other noise suppressed.
Please do not come to conclusions (that this projector is not worth) after watching video/photos as the actual quality is at least 3x better. If they are not acceptable one should blame basically my photographic skills/capabilities and inability of the equipment used (galaxy s2) to record the picture at realistic quality level than what got projected on wall.
LGPA70G-Balu-test vedio1 - YouTube (the big noise around 45sec due to my son dropping something)
LGPA70G-Balu-test-Vedio2 - YouTube
I have watched a full length movie last night in total dark and the experience is awsome, there is a definite 'wow' feeling to watch at home that big picture (around 100inch) so clear.
The projector does all this silently (no noticable noise of fan etc) and it kept itself cool. I immediately switched off and can put it inside its pouch after the movie i.e., after a continuous operation of nearly 3-4 hours. I have not taken any pictures last night as I would like to test it in day light and upload pictures.
I have hooked it up to my videocon d2h hdmi source and the quality of output is very good. The HD channels are shown with ease and are clear. I am sure if I project this against a screen it will
be even better.
Sources of some of the pictures are from the below files which can be googled around/you tubed easily. Wings to Paradise 1 of 2 1080p HD.mp4,
h264_720p_hp_3.1_600kbps_aac_mp3_dual_audio_harry_potter.mkv
I have not tested anything specific to 3D as I dont have glasses etc to test it. I have also not tested stuff by hooking this to my PC graphic card. So will upload if I find something useful.
Hope this helps and please feel free to throw any questions you may have..
This is more an out of the box setup projected on bedroom wall (cream color) between 10am-12pm with window covered and room door wide open. There is enough light in room and I have uploaded the photos of setup taken without flash.
Every setting on the projector left untouched except the lamp saving level which i kept at Medium (default is maximum meaning slightly dim picture but not that much, see the photo)
I have downloaded few video samples from Video Samples | DivX.com and from you tube to view off a USB Stick.
This is basically to visualise how the projector does and everyone else can easily compare to the original work (one should download these locally and watch it over a PC to come to conclusions). This is something I was missing in this forum... In all reviews the pictures uploaded are good but against what source they are shown as uploaded is something
not clear which i tried to fix here.
I have also taken a video out of couple of files which i uploaded to you tubewhich gives a fair idea of how the experience is, the audio is right outof the projector which is sort of ok but no where near any quality audio system like a AVR (which is obvious) but is sufficient for a couple to watch a movie in bedroom with every other noise suppressed.
Please do not come to conclusions (that this projector is not worth) after watching video/photos as the actual quality is at least 3x better. If they are not acceptable one should blame basically my photographic skills/capabilities and inability of the equipment used (galaxy s2) to record the picture at realistic quality level than what got projected on wall.
LGPA70G-Balu-test vedio1 - YouTube (the big noise around 45sec due to my son dropping something)
LGPA70G-Balu-test-Vedio2 - YouTube
I have watched a full length movie last night in total dark and the experience is awsome, there is a definite 'wow' feeling to watch at home that big picture (around 100inch) so clear.
The projector does all this silently (no noticable noise of fan etc) and it kept itself cool. I immediately switched off and can put it inside its pouch after the movie i.e., after a continuous operation of nearly 3-4 hours. I have not taken any pictures last night as I would like to test it in day light and upload pictures.
I have hooked it up to my videocon d2h hdmi source and the quality of output is very good. The HD channels are shown with ease and are clear. I am sure if I project this against a screen it will
be even better.
Sources of some of the pictures are from the below files which can be googled around/you tubed easily. Wings to Paradise 1 of 2 1080p HD.mp4,
h264_720p_hp_3.1_600kbps_aac_mp3_dual_audio_harry_potter.mkv
I have not tested anything specific to 3D as I dont have glasses etc to test it. I have also not tested stuff by hooking this to my PC graphic card. So will upload if I find something useful.
Hope this helps and please feel free to throw any questions you may have..