I purchased a new Marantz 4002 receiver and ran auto-setup. After multi runs of the auto-setup...
- The front speaker sizes are set sometimes Large, sometimes Small. (I have Wharfedale 9.5 + 9.CM)
- The distances are totally out of whack. (Speakers are about 15 feet from the listening position.) The distance is setup from 2 feet to 15 feet.
- The sub isn't detected at all. No sound comes during the setup so the receiver sets it as None and the crossover is set at 100hz. The crossover on the sub (Sub 150) is set at the lowest setting of 35hz so as to let the receiver handle the bypass and the volume on the sub is at half. The sub is working when playing a movie and I've manually changed the sub to Yes in the receiver.
Can anyone comment on why this may be happening?
- The front speaker sizes are set sometimes Large, sometimes Small. (I have Wharfedale 9.5 + 9.CM)
- The distances are totally out of whack. (Speakers are about 15 feet from the listening position.) The distance is setup from 2 feet to 15 feet.
- The sub isn't detected at all. No sound comes during the setup so the receiver sets it as None and the crossover is set at 100hz. The crossover on the sub (Sub 150) is set at the lowest setting of 35hz so as to let the receiver handle the bypass and the volume on the sub is at half. The sub is working when playing a movie and I've manually changed the sub to Yes in the receiver.
Can anyone comment on why this may be happening?