New AV receiver

[hardcore_gamer99]

Ok so i had 4800h and had to sell it for some reason. I want to try marantz this time. I will be powering up dali rubikore 6+ rubikore centre channel+ opticon 2 mk2 as rear pair and 4 atmos speakers later. Someone said in MARANTZ we can only select 6 and 8 ohms in settings but all these speakers are 4 ohms only will it work? Also Can cinema 40 not do 7.x.4 without any amp? I don't want to waste money on tight budget now. If bought x3800h and get amp for rubikore 6 i dont i can cheap out on amp like 15k. If costlier amp is needed for these speakers then better buy upper model. Also denon x4800h vs cinema 40 any much difference? price difference is 30000 to 350000.

 

[mshifi]

Don't think you will find much difference between denon and marantz. Try arcam or anthem

 

[hardcore_gamer99]

Don't think you will find much difference between denon and marantz. Try arcam or anthem

Arcam amps too costly

 

[Love4sound]

You won’t find much difference. You may even end up missing the Denon 4800 for movies. If going for marantz go for its processor which is again very expensive but only then you will notice the difference. Not sure why you sold Denon 4800 and looking for similar range of receivers.

 

[hardcore_gamer99]

You won’t find much difference. You may even end up missing the Denon 4800 for movies. If going for marantz go for its processor which is again very expensive but only then you will notice the difference. Not sure why you sold Denon 4800 and looking for similar range of receivers.

needed funds tha ttime. Go for its processor means?

 

[Love4sound]

needed funds tha ttime. Go for its processor means?

AV7706 or AV8805A. They will do a better job with processing the audio compared to AVR’s. But the set up is expensive as you will have to spend for both processor and Amp. Processor will be much more expensive than 4800.

 

[hardcore_gamer99]

AV7706 or AV8805A. They will do a better job with processing the audio compared to AVR’s. But the set up is expensive as you will have to spend for both processor and Amp. Processor will be much more expensive than 4800.

not my budget. i would try x6800h then

 

[Akshr]

why did you sell the 4800h, why were you not satisfied with that one?

 

[Love4sound]

not my budget. i would try x6800h then

If you where satisfied with 4800 better to go same and add a power amp to LCR,this will definitely show good improvements

 

[hardcore_gamer99]

If you where satisfied with 4800 better to go same and add a power amp to LCR,this will definitely show good improvements

price of amp you suggest?

 

[Love4sound]

price of amp you suggest?

PA again is expensive. Basx series from emotiva are popular entry level amps and work well in small to medium sized rooms. They range from 60k-1L

 

[hardcore_gamer99]

PA again is expensive. Basx series from emotiva are popular entry level amps and work well in small to medium sized rooms. They range from 60k-1L

Its a same thing then with x4800h it will still be 2.35lakhs.

 

[Love4sound]

Its a same thing then with x4800h it will still be 2.35lakhs.

But 4800 with PA for LCR will sound much better than 6800 without PA. You can even go with 3800 and PA combo. Going 6800 or marantz AVR won’t bring any improvements.

 

[hardcore_gamer99]

But 4800 with PA for LCR will sound much better than 6800 without PA. You can even go with 3800 and PA combo. Going 6800 or marantz AVR won’t bring any improvements.

How pre amp is connected? Will dirac work for allspeakers?

 

[Love4sound]

Instead of connecting the speakers with AVR you will be connecting it with PA. From AVR pre-outs you will be connecting the respective channels to the PA pre-outs through RCA cable. Rest all remains same with AVR.

 

[hardcore_gamer99]

Instead of connecting the speakers with AVR you will be connecting it with PA. From AVR pre-outs you will be connecting the respective channels to the PA pre-outs through RCA cable. Rest all remains same with AVR.

And what specification to see for pa, for specific speakers?

 

[Love4sound]

And what specification to see for pa, for specific speakers?

Just like AVR’s the PA will have power ratings for XY channels driven. You can compare and see if the ratings will match the speaker requirements