I have a pair of two-way book-shelf speakers with the following specs, which are used to enhance the SQ of the TV.
Dimensions : Width 13.5cm (5.25") x Depth 17cm (6.25") x Height 25cm (9.75")
Drivers: 4" Kevlar cone woofer and 3/4" Polypropylene tweeters.
Construction: 1/2" MDF with no internal bracing. the speakers are mounted on a Plastic baffle which is inturn fixed to the speaker cabinet with 4 screws and has a rubber seal for air tight fit.
Problem: The woofer really goes down to 60 Hz or whereabouts. There is some jarring sound at louder volume.
I intend to make cabinets using 18mm MDF sheets like what Suri did. Something like in the picture (Magico Mini II cabinets) & make it front ported.
Points to ponder:
1. The TS Parameters of the drivers are not known.
2. I intend to change the tweeter to that of a fabric cone that I purchased from Richie street, which is sounding far better than the polypropylene one.
Any comments / suggestions / pointers are welcome.
Dimensions : Width 13.5cm (5.25") x Depth 17cm (6.25") x Height 25cm (9.75")
Drivers: 4" Kevlar cone woofer and 3/4" Polypropylene tweeters.
Construction: 1/2" MDF with no internal bracing. the speakers are mounted on a Plastic baffle which is inturn fixed to the speaker cabinet with 4 screws and has a rubber seal for air tight fit.
Problem: The woofer really goes down to 60 Hz or whereabouts. There is some jarring sound at louder volume.
I intend to make cabinets using 18mm MDF sheets like what Suri did. Something like in the picture (Magico Mini II cabinets) & make it front ported.
Points to ponder:
1. The TS Parameters of the drivers are not known.
2. I intend to change the tweeter to that of a fabric cone that I purchased from Richie street, which is sounding far better than the polypropylene one.
Any comments / suggestions / pointers are welcome.
Attachments
Last edited: