I am trying to build a two way bookshelf hi fi system .Following are my options :
woofer :
(1) Dayton Audio - DC160-8 - 6-1/2" Classic Woofer : Rs 3,393
(2) Peerless - 5.25" Coated Paper Cone Woofer - M13NH : Rs 1200
(3) Peerless Fabrikkerne (I) Ltd - S16NI-8 - High fidelity 8 Ohm 6 1/2 inch Woofer Rs 1415
tweeter :
(1)Dayton Audio - DC28F-8 1-1/8" Silk Dome Tweeter 8 ohm : Rs 1,812
(2) Peerless Fabrikkerne (I) Ltd - TL25SN - 25mm Silk DomeTweeter: Rs 1,375
(3) Peerless Fabrikkerne (I) Ltd - SR10DT - 25mm Fabric Dome Tweeter Rs 1,000
Active crossover : (1) BEHRINGER SUPER-X PRO CX2310 CROSSOVER
(2) Ahuja brand ACX 202 active crossover
(3) Dynatech PSC-224 High Precision Stereo 3-way Crossover
(4) Generic Board : Can Adjust/Customized 2 range 2 way Speaker Active Frequency Divider Crossover Linkwitz-Riley Circuit DSP board free shipping (chinese board costing 24 dollars)
I am really confused about crossovers as these seems to be 3 way crossover except the 4th one .
Amplifier : I will be bi -amping using my existing Td a 7498 amplifier for woofers and I have to buy a new amplifier preferably tpa 3116 for tweeters.
Cabinet : Either I will get it built from a carpenter or I will get the panels cut through cnc machine and try to make it . Also I will skip the binding posts in the cabinet setup as I would like to conncet bare wires from drivers to amplifiers.
Note : I am very open to suggestions /advices /options not mentioned in this post.
woofer :
(1) Dayton Audio - DC160-8 - 6-1/2" Classic Woofer : Rs 3,393
(2) Peerless - 5.25" Coated Paper Cone Woofer - M13NH : Rs 1200
(3) Peerless Fabrikkerne (I) Ltd - S16NI-8 - High fidelity 8 Ohm 6 1/2 inch Woofer Rs 1415
tweeter :
(1)Dayton Audio - DC28F-8 1-1/8" Silk Dome Tweeter 8 ohm : Rs 1,812
(2) Peerless Fabrikkerne (I) Ltd - TL25SN - 25mm Silk DomeTweeter: Rs 1,375
(3) Peerless Fabrikkerne (I) Ltd - SR10DT - 25mm Fabric Dome Tweeter Rs 1,000
Active crossover : (1) BEHRINGER SUPER-X PRO CX2310 CROSSOVER
(2) Ahuja brand ACX 202 active crossover
(3) Dynatech PSC-224 High Precision Stereo 3-way Crossover
(4) Generic Board : Can Adjust/Customized 2 range 2 way Speaker Active Frequency Divider Crossover Linkwitz-Riley Circuit DSP board free shipping (chinese board costing 24 dollars)
I am really confused about crossovers as these seems to be 3 way crossover except the 4th one .
Amplifier : I will be bi -amping using my existing Td a 7498 amplifier for woofers and I have to buy a new amplifier preferably tpa 3116 for tweeters.
Cabinet : Either I will get it built from a carpenter or I will get the panels cut through cnc machine and try to make it . Also I will skip the binding posts in the cabinet setup as I would like to conncet bare wires from drivers to amplifiers.
Note : I am very open to suggestions /advices /options not mentioned in this post.
Last edited: