How much the ceiling height matters?
Or the “gap” widens,.... aboveAnother can of worms gets opened!![]()
Excellent question, now I am wondering about this too...How much the ceiling height matters?
No. However I wonder whether unlike the X and Y coordinates there’s much leeway to adjusting the Z coordinate. It’s dictated by our sitting height (ear level) - there’s no option to move the speakers up without also levitating oneself. Room treatment is a possible approach, but that’s OT for this thread.Or the “gap” widens,.... above
@SachinChavan did you imagine this happening when you started this thread?
Off topic....are half squash balls able to take the weight of the speakers on granite...without getting squashed.Put half squash balls under the granite slabs
No. However I wonder whether unlike the X and Y coordinates there’s much leeway to adjusting the Z coordinate. It’s dictated by our sitting height (ear level) - there’s no option to move the speakers up without also levitating oneself. Room treatment is a possible approach, but that’s OT for this thread.
Yes, of course it is possible to increase or decrease the height of the speaker stands. It's also possible to tilt the speakers up or down to adjust for the ceiling height.No. However I wonder whether unlike the X and Y coordinates there’s much leeway to adjusting the Z coordinate. It’s dictated by our sitting height (ear level) - there’s no option to move the speakers up without also levitating oneself. Room treatment is a possible approach, but that’s OT for this thread.
There was this other thread about soundstage and imaging where the “height” was discussed. I can’t recall how it ended...Yes, of course it is possible to increase or decrease the height of the speaker stands. It's also possible to tilt the speakers up or down to adjust for the ceiling height.
Off topic....are half squash balls able to take the weight of the speakers on granite...without getting squashed.
If you do that without changing your sitting height, the tweeters won’t match your ear level.Yes, of course it is possible to increase or decrease the height of the speaker stands. It's also possible to tilt the speakers up or down to adjust for the ceiling height.
Sachin, maybe we are going ot here but I don't believe that tweeters need to be exactly at ear level. Tweeters can be positioned differently on different cabinets. In mine, the tweeters have the midrange driver above them and the woofer below, unlike the more common arrangement of tweeters at the top. Some speakers have multiple tweeters, all in different positions. Moreover, if one can be off axis horizontally then why not vertically? I've also observed dramatic effects on sound stage by tilting the cabinet. Like Prem said earlier, nothing is cast in stone.If you do that without changing your sitting height, the tweeters won’t match your ear level.
@Fiftyfifty, even then, for a given speaker the relative height between ears and the drivers is fixed. That’d leave no possibility to differentially change the height of the speaker and the listener without affecting the experience. Hope I am communicating this effectively.Sachin, maybe we are going ot here but I don't believe that tweeters need to be exactly at ear level. Tweeters can be positioned differently on different cabinets. In mine, the tweeters have the midrange driver above them and the woofer below, unlike the more common arrangement of tweeters at the top. Some speakers have multiple tweeters, all in different positions. Moreover, if one can be off axis horizontally then why not vertically? I've also observed dramatic effects on sound stage by tilting the cabinet. Like Prem said earlier, nothing is cast in stone.
I'm talking about 'affecting the experience'. You may like it if you can try it without too much physical effort.@Fiftyfifty, even then, for a given speaker the relative height between ears and the drivers is fixed. That’d leave no possibility to differentially change the height of the speaker and the listener without affecting the experience. Hope I am communicating this effectively.
Horizontally we have two speakers, so it’s possible to alter the distance between them. That freedom doesn’t exist vertically.
That's true, it does depend on the design. The Merlin's I owned earlier were recommended by the manufacturer to keep ear level between tweeter and woofer. . Some older monitors had tweeter below ear level as wellSachin, maybe we are going ot here but I don't believe that tweeters need to be exactly at ear level. Tweeters can be positioned differently on different cabinets. In mine, the tweeters have the midrange driver above them and the woofer below, unlike the more common arrangement of tweeters at the top. Some speakers have multiple tweeters, all in different positions. Moreover, if one can be off axis horizontally then why not vertically? I've also observed dramatic effects on sound stage by tilting the cabinet. Like Prem said earlier, nothing is cast in stone.
Sir, Get suitable Isoacoustics Gaia feet for your Tannoys, you'll never have to go through this experiments ever again, I've tried the Slabs, Smiley balls, Aptilig Boards, SF Cera pods, SVS Subwoofer isolation feet for my Focal Aria Floorstanders. Gaia 3s were the most rewarding ones as they improved the bass frequency resolution by few notches at the same time cleared the mids in realistic way. They're a must accessory for my speaker systems, SVS Subwoofer isolation feet are the next best economic upgrade in my experience.I finally put granite bases below my Tannoys and removed the spikes placing them on the granite slabs.. Little bit of an improvement but it could well have been psychological..
Put half squash balls under the granite slabs and the bass has tightened surely with better clarity in the mids.. Also realised that my wooden floor tiles are uneven as the spikes on the granite slabs were not stable.. So yes, I think the squash balls have done their bit in improving the sound and minding the gap between the speakers and the floor..
Sir, Get suitable Isoacoustics Gaia feet for your Tannoys, you'll never have to go through this experiments ever again, I've tried the Slabs, Smiley balls, Aptilig Boards, SF Cera pods, SVS Subwoofer isolation feet for my Focal Aria Floorstanders. Gaia 3s were the most rewarding ones as they improved the bass frequency resolution by few notches at the same time cleared the mids in realistic way. They're a must accessory for my speaker systems, SVS Subwoofer isolation feet are the next best economic upgrade in my experience.
Very sleek cd rack !Attached is a picture of my granite slab on squash balls ..
Panditji, the squash balls are between the floor and granite, right? Is the base of the speaker cabinet reading flush on the granite?Attached is a picture of my granite slab on squash balls ..