new subwoofer help

[hardcore_gamer99]

They are really nice. I auditioned 3-4 months ago, and at the same time I auditioned for Monolith too. Monolith is really good for movies, but Ascendo is good for movies and music—a really good one for the price.

@hardcore_gamer99

and also consider Rythmik.

If you can audition some of the subwoofers everyone mentioned above, it will be much easier to decide which one you like. Every brand has their own characteristics.

finally from mains service line and mcb i did my connections. Subwoofer 2 sockets and switches have separate 4mm line and tv 4k player appletv denon have separate 4mm line from mains

 

[hardcore_gamer99]

if i buy dirac live x4800h but then if receiver goes bad then i buy new x4800h will dirac still work on new device or not

 

[ajuvignesh]

if i buy dirac live x4800h but then if receiver goes bad then i buy new x4800h will dirac still work on new device or not

Nope. It won’t. You have to purchase again.

 

[hardcore_gamer99]

Nope. It won’t. You have to purchase again.

damn its waste then

 

[Nitin K]

damn its waste then

No point in wasting money and make do with the Audyssey app. Just buying new softwares without understanding the implications will only make you go down deeper in the rabbit hole and increasing your frustrations.

 

[Phani24]

Instead one can try audissy app and Audissy one.

 

[hardcore_gamer99]

Instead one can try audissy app and Audissy one.

this is disclaimer on denon site
Audyssey One is a third-party software/script that automates the calibration process for home theater audio. The risks associated with using Audyssey One are currently unknown. However, Denon will not be responsible for any damages to Denon models or any connected equipment resulting from the utilization of Audyssey One.

Since Audyssey One is not a product of Denon or Audyssey Labs.

• We do not provide any support or take any responsibility for the software.
  
• Any damages incurred due to the use of Audyssey One will not be covered under the warranty of your Denon model.
  
• The end user is solely responsible for any costs related to the repair or replacement of products affected by the use of Audyssey One.

 

[Phani24]

this is disclaimer on denon site
Audyssey One is a third-party software/script that automates the calibration process for home theater audio. The risks associated with using Audyssey One are currently unknown. However, Denon will not be responsible for any damages to Denon models or any connected equipment resulting from the utilization of Audyssey One.

Since Audyssey One is not a product of Denon or Audyssey Labs.

• We do not provide any support or take any responsibility for the software.
• Any damages incurred due to the use of Audyssey One will not be covered under the warranty of your Denon model.
• The end user is solely responsible for any costs related to the repair or replacement of products affected by the use of Audyssey One.

So stick to audissy. Buy audissy app or audissy license. As audissy license much more cheaper than dirac

 

[hardcore_gamer99]

Finally tv wall mount done now i have space to try subwoofer many places and now can place beween speakers easily

 

[hardcore_gamer99]

I will open bottle only when i am done with subwoofer placement alignmnt with room eq wizardd

 

[hardcore_gamer99]

So stick to audissy. Buy audissy app or audissy license. As audissy license much more cheaper than dirac

to run my system in 2.1 it is automatic 2.1 or do i have to set any setting? in denon

 

[hardcore_gamer99]

So stick to audissy. Buy audissy app or audissy license. As audissy license much more cheaper than dirac

hi i found best place in rew room simulator do you find this best and flat for subwoofer. Till 120hz its good and flat and beyond 120hz does not matter. do you agree?

 

[Phew]

Change the spl limits to 40db - 130db and then see if it is actually flat.

 

[hardcore_gamer99]

Change the spl limits to 40db - 130db and then see if it is actually flat.

i am confused about the measurements from wall. Do we have to consider subwoofer cone which is in front? To measure how far it is from wall? or full cabinet of subwoofer. Its all confusing me. If u seee the image below it can face towards my chair but it can also face my left wall. no?

 

[Phew]

Just use the front of the sub cabinet to measure distance to front and back wall and centre of sub for right to left. The rotate option can be used by right clicking on the sub box. Also your sub's -3db point is 16hz in ported and 17hz in sealed.

Hope this helps

 

[Saiganesh]

I have finally set my denon x4800h to LFE only and speaker crossed at 80hz i have no issues now. Music also have good bass now . I yesterday turned on paramatic eq on svs app it was like boom while the music was already playing. I have just got room eq wizard full book printed just got it. I will study this software fully now. It will atleast tell me where are the peaks and nulls and can also help with speaker and subwoofer timing match and all that. i have got dirac live manual printed will study that asll well.

Oh man! Lot going. Had health issue. Just got back. Lot of pending work. Want to hear how Dirac makes a difference. Heard it at different installations. Feels like placeboo...but may be need extensive listening...

 

[hardcore_gamer99]

Oh man! Lot going. Had health issue. Just got back. Lot of pending work. Want to hear how Dirac makes a difference. Heard it at different installations. Feels like placeboo...but may be need extensive listening...

i have null in bass at 71 to 80 hz range. in REW i am getting help from a guy in germany in subwoofer best placement in my room. lets see

 

[hardcore_gamer99]

The hole = lack of bass effect of a particular range of frequencies. Its a Figure of speech

having null in 71 to 80hz frequency as told by ROOM EQ WIZARD. its huge dip in spl

 

[hardcore_gamer99]

Thick curtains help a lot in accoustics. And the carpets (kashmiri) would complete the deal.
But this cannot help in delayed bass.
Have you done audysy yet?

i think i have issues in subwoofer with lfe only on youtube and music cd playback. Can you help?

 

[hardcore_gamer99]

menu-speakers-manual setup-crossover-front- change to full range
And
Menu-speakers-manual setup-advanced-Low frequency effect-subwoofer output- change to LFE+Main

If bass is late then surely there is a phase issue.
Already gave a extensive write up. Write up may sound long but the process is simple if understood.

i ran room eq wizard today. my pb 2000 pro went till 12hz when i placed in front right and facing right side. but as usual have null in 70 to hz what to do?