• Hello and Welcome to HiFiVision.com - an online community for the home entertainment and tech enthusiasts!

    If you would like to ask a question, participate in a discussion and view attachments please Register yourself.

Spares for Garrard 2025 TC Changer.

Wharfedale Evo 4.2

sureshkuranjalayil

Active Member
Joined
Jan 28, 2009
Messages
163
Points
28
Location
Mumbai
I am in look out of following spares for Garrard 2025 TC Record Changer:-

1) The plastic part which is holding the Cartridge.
2) Tonearm Stand with clip.

(Sorry, I don't know the correct technical names of these parts).

Kindly help me in getting these parts. I am based in Mumbai.

Regards,

Suresh Babu
sureshkuranjalayil@gmail.com
 

stevieboy

Well-Known Member
Joined
May 28, 2008
Messages
2,366
Points
113
Location
bangalore
can you take a picture? i dont understand the first part. do you mean the headshell in which the cartridge is mounted with screws? and this plastic part then attaches to the tonearm? if so headshells at Needle Doctor

as for the second part why dont you make your own tonearm stand? all you need is a block of something at the right height so your tonearm can rest when its not on the record! you can make a U shaped locking mechanism which you simply put over the tonearm, at the point where it rests on this stand to lock the tonearm so it doesnt shift. you'd definitely not get an original part for such an old turntable now! and if you do it'd be very expensive! plus garrard was british so finding in india :)
 

sureshkuranjalayil

Active Member
Joined
Jan 28, 2009
Messages
163
Points
28
Location
Mumbai
can you take a picture? i dont understand the first part. do you mean the headshell in which the cartridge is mounted with screws? and this plastic part then attaches to the tonearm? if so headshells at Needle Doctor

as for the second part why dont you make your own tonearm stand? all you need is a block of something at the right height so your tonearm can rest when its not on the record! you can make a U shaped locking mechanism which you simply put over the tonearm, at the point where it rests on this stand to lock the tonearm so it doesnt shift. you'd definitely not get an original part for such an old turntable now! and if you do it'd be very expensive! plus garrard was british so finding in india :)

Dear Stevieboy,

Thanks. Yes, it is headshell. I will try the website referred by you.

I will put my efforts to make the tonearm stand as advised by you.

Best wishes,
Suresh Babu
 

Anil kumar

Well-Known Member
Joined
Nov 3, 2006
Messages
803
Points
93
Location
Bengaluru
Hi Suresh, here is the link for spares Garrad Turntable parts
If you do not get any spares, i can fabricate it. I don't mind helping you. Please send close up picture of tone arm or if you can drop the TT @ Bengaluru nothing like it.


Regards,
Anil





I am in look out of following spares for Garrard 2025 TC Record Changer:-

1) The plastic part which is holding the Cartridge.
2) Tonearm Stand with clip.

(Sorry, I don't know the correct technical names of these parts).

Kindly help me in getting these parts. I am based in Mumbai.

Regards,

Suresh Babu
sureshkuranjalayil@gmail.com
 

sureshkuranjalayil

Active Member
Joined
Jan 28, 2009
Messages
163
Points
28
Location
Mumbai
Hi Suresh, here is the link for spares Garrad Turntable parts
If you do not get any spares, i can fabricate it. I don't mind helping you. Please send close up picture of tone arm or if you can drop the TT @ Bengaluru nothing like it.


Regards,
Anil[/QU

Thanks Anil. I am checking up with a few people here in Mumbai and if I am unable to get these spares, I will revert back to you.

Best wishes,
Suresh Babu
 

pratapaditya

New Member
Joined
Jan 23, 2011
Messages
72
Points
0
Location
Kolkata
Hi,

I have a Garrard 2025 Changer at home that used to work, but has been lying defunct for some years. Anyone know of a good place in Kolkata where I can get it repaired?
 
Top