I use the DAC. Quite happy with it.On a seperate note, does anyone know of any good banana plugs to connect the speaker cables to the AIYIMA amplifiers. I tried the 4mm Dhivi and Blue Rigger banana cables available on Amazon but they dont fit. Currently all speaker cable connections are via bare wires.
However due to frequent changing of amps, this is now becoming tiresome.
What type of Banana cables are available which are needed to use them with these amplifiers ?
Thanks in advance.
Not sure why you are unable to use the 4mm banana plugs. I'm using 4mm plugs easiliy on the AIYIMAOn a seperate note, does anyone know of any good banana plugs to connect the speaker cables to the AIYIMA amplifiers. I tried the 4mm Dhivi and Blue Rigger banana cables available on Amazon but they dont fit. Currently all speaker cable connections are via bare wires.
However due to frequent changing of amps, this is now becoming tiresome.
What type of Banana cables are available which are needed to use them with these amplifiers ?
Thanks in advance.
push it in a little harder, i also felt the size is little smaller compared to other AVR and speakers i haveOn a seperate note, does anyone know of any good banana plugs to connect the speaker cables to the AIYIMA amplifiers. I tried the 4mm Dhivi and Blue Rigger banana cables available on Amazon but they dont fit. Currently all speaker cable connections are via bare wires.
However due to frequent changing of amps, this is now becoming tiresome.
What type of Banana cables are available which are needed to use them with these amplifiers ?
Thanks in advance
Monster used to have good ones which were a screw type crimp. Have used for a decade or more. Still doing great. If its banana on the back of amp any banana should fit. See if MX has some decent one ?On a seperate note, does anyone know of any good banana plugs to connect the speaker cables to the AIYIMA amplifiers. I tried the 4mm Dhivi and Blue Rigger banana cables available on Amazon but they dont fit. Currently all speaker cable connections are via bare wires.
However due to frequent changing of amps, this is now becoming tiresome.
What type of Banana cables are available which are needed to use them with these amplifiers ?
Thanks in advance.
If the speaker terminal on amp has a cap that turns on threads please release, re-seat the banana plugs and tighten the terminal caps.Not sure why you are unable to use the 4mm banana plugs. I'm using 4mm plugs easiliy on the AIYIMA
View attachment 80682
How do they compare to any entry level Marantz keeping power output aside.for beginners these are super value for
How do they compare to any entry level Marantz keeping power output aside.
I think we are soon going to see them in classifiedsFor my taste I would pick the Marantz,
the meat and body found in the Class AB amps is missed. I don’t like the way mids are produced either.
But low end and the highs are clean and detailed.
If one has not heard other amps and these are crazy bang for the buck.
Few cons I encountered with Aiyima A07 Max, in bridged or Mono mode the volume pot still in operational. One will have to match it with the second pair everytime you turn it on, and volum knob acts as a power on off switch.
And with just one input you need to add a pre amp if you have multiple sources.
A marantz will have a phono, more inputs, a dac and even a remote.
If you want all above in these class D amps, the price is equal or slightly higher adding each sources.
Pick your poison based on needs
I use a thick visiting card between the terminals to avoid short circuitThe terminals are very small and the inter terminal distance is quite tight.
Ha Ha. Exactly what I'm doingI use a thick visiting card between the terminals to avoid short circuit
Aiyima sends me this, so nothing will be on classifiedsI think we are soon going to see them in classifieds
Aiyima A07 MAX is still better in this departmentI use a thick visiting card between the terminals to avoid short circuit
I have Aiyima D03. I could use bare wire 16 gauge with difficulty with lot of twisting. 14 gauge cannot be used with the small hole. Since i donot remove the wire often, I just wrap some insulating tape on one terminal.The good thing about these new kids on the block is that they are absolutely, absolutely silent when no music is playing. The cons are
I seriously doubt the output capacity. It just doesn't have the slam of a real commercial amp. Maybe becuase of lack of large capacitors, I don't know. I really don't like the backside. The terminals are very small and the inter terminal distance is quite tight.
Thats a bummer….Few cons I encountered with Aiyima A07 Max, in bridged or Mono mode the volume pot still in operational. One will have to match it with the second pair everytime you turn it on, and volum knob acts as a power on off switch.
And with just one input you need to add a pre amp if you have multiple sources.
This reminds me of car reading car articles nearly 2 decades ago where Japanese/American/European cars are said to have horses under the hood and korean cars had equivalent number of ponies. Well things have changed since then.I seriously doubt the output capacity. It just doesn't have the slam of a real commercial amp. Maybe becuase of lack of large capacitors, I don't know.
I seriously doubt the output capacity. It just doesn't have the slam of a real commercial amp. Maybe becuase of lack of large capacitors, I don't know. I really don't like the backside. The terminals are very small and the inter terminal distance is quite tight.
So I wonder if the PMPO thingie is creeping in again in another way ?These do 50-60 watts easily, there have been some tests conducted.
Clean watts yes, but quality watts not so sure.