sbhaumik2010
New Member
Hi Gurus,
I recently got Denon 1611 AVR as process of building my HT system. I am using them with old sets of SONY speakers & SONY SA-WM500 sub-woofer from my previous HTIB system. I am confused on the right way to calibrate of my Denon 1611.
If I follow the Denon setup guide then Sub woofer should have 50% gain (volume) and crossover freq set to max before i run Audyssey. But in some forums they have said to set gain to 30%.
Also when i check the crossover frequency after calibration by Audyssey I find that central speaker has 100Hz and front speakers are 40Hz. Should I leave then as it is or change it to 80Hz. Sub-woofer LFE is set to 120 Hz.
Please recommend the best way to calibrate Denon 1611.
I recently got Denon 1611 AVR as process of building my HT system. I am using them with old sets of SONY speakers & SONY SA-WM500 sub-woofer from my previous HTIB system. I am confused on the right way to calibrate of my Denon 1611.
If I follow the Denon setup guide then Sub woofer should have 50% gain (volume) and crossover freq set to max before i run Audyssey. But in some forums they have said to set gain to 30%.
Also when i check the crossover frequency after calibration by Audyssey I find that central speaker has 100Hz and front speakers are 40Hz. Should I leave then as it is or change it to 80Hz. Sub-woofer LFE is set to 120 Hz.
Please recommend the best way to calibrate Denon 1611.