Hi Friends,
Back with a new Project again. It's an 10 Inch Sub having internal volume of 69.5 ltrs tuned to 35Hz. Vent size is 106mm internal diameter x 200mm length. A cad model drawing is below. I will be using 18mm Plywood. Since its a Ported Enclosure, I have not provided heavy bracing inside but the bracing provided will be good enough to absorb the vibrations. External Dimensions are 650mm H x 350mm W x 432mm Deep. Base will be made by Joining 2 baffles of same size. Total thickness of Base will be 36mm.
Cutting of all Baffles is done on CNC router. Below are the Photos of same.
Sadik Bhatkar
Back with a new Project again. It's an 10 Inch Sub having internal volume of 69.5 ltrs tuned to 35Hz. Vent size is 106mm internal diameter x 200mm length. A cad model drawing is below. I will be using 18mm Plywood. Since its a Ported Enclosure, I have not provided heavy bracing inside but the bracing provided will be good enough to absorb the vibrations. External Dimensions are 650mm H x 350mm W x 432mm Deep. Base will be made by Joining 2 baffles of same size. Total thickness of Base will be 36mm.
Cutting of all Baffles is done on CNC router. Below are the Photos of same.
Sadik Bhatkar