why not use dedicated boards for left and right channels.
If you can get the entire chain that way, then nothing like it, no cross talk or spill over.That's not my prerogative Kannan! you have to ask Aniket that.
A Dual-Mono Preamplifier...?
I've seen some preamplifiers boasting "Dual Mono" designs... My question is do dual mono preamplifiers actually have better channel separation and other advantages over regular stereo preamplifiers, or is it just smoke and mirrors?
I'm curious to see what others have to say.
It's based on Toshiba BJTs. All discrete components.Class A design.Congratulations!
What is the design of this?
There are no opamps.
There is really no need for dual mono, if PCB layout is good. It could be beneficial in bdi high gain application like phonostage. I have tried dual mono configuration of my existing phonostage, but there wasn't any difference in sq in my system.why not use dedicated boards for left and right channels.
Its rs 3200 for fully soldered module with volume pot including shipping. It can also be used as headphone amp.How much for kit?
No offense to anyone, but Eight audio uses some of Aniket's previous designs without taking prior permission.How does it sound ? is it better than the JC2 Pre clones and the ones on Eight audio if someone has compared these.
Thanks ,
lifewater
Interesting to know, how is sound compared to dcb1/B1 based on 3sk170 jfets?Crosstalk is less than -95dB, i beleive that no humar ear can hear that.
The design is full symmetric push pull class A, it uses low noise matched pair BJT’s from ROHM and KEC.
Regards,
Aniket
I will let you know once I build this. I am currently using DCB1 and have used B1 in past.Interesting to know, how is sound compared to dcb1/B1 based on 3sk170 jfets?
Which can be technically better?
Damn !!!! Really ??!!!No offense to anyone, but Eight audio uses some of Aniket's previous designs without taking prior permission.
Regards
Sachin
No offense to anyone, but Eight audio uses some of Aniket's previous designs without taking prior permission.
Regards
Sachin
It should be offensive to everyone! Especially when it's sold commercially without Aniket getting anything out of it.No offense to anyone, but Eight audio uses some of Aniket's previous designs without taking prior permission.
Regards
Sachin
Exactly !!!It should be offensive to everyone! Especially when it's sold commercially without Aniket getting anything out of it.
No offense to anyone, but Eight audio uses some of Aniket's previous designs without taking prior permission.
Regards
Sachin
It seems Eight audio has changed their website layout. Aniket has mentioned this issue here also, post # 56 https://www.hifivision.com/threads/high-performance-class-a-amplifier.67541/page-3#post-772204That's an unfair and unhealthy trade practice... can you pl specify which designs.
I personally don't endorse or subscribe to such organizations...
so, placing eight audio on my black list.