Optoma HD141x HD / Full 3D

[htfan17]

Hi guys new optoma hd141x owner here. I'm running a 120" screen and I'm convinced the picture isn't as good as when I set it up closer on a table yet I've seen videos on YouTube of crystal clear images with the same projector anyone else running 120 inch screen ? I find anything less than 1080p is just really pixely.

What do u mean when u say 'as good as when i set it up closer on a table'?

I have 120 inch and runs pretty gud without any problem. You are right difference between 1080p and lower resolutions is pretty evident at this size.

 

[cherryturbojames]

When I had it set up closer to the screen the picture was amazing but at 120 inch I'm convinced it's not quite as clear as it was I wonder if it's so bright is some of the light bouncing right back into the lens

 

[htfan17]

When I had it set up closer to the screen the picture was amazing but at 120 inch I'm convinced it's not quite as clear as it was I wonder if it's so bright is some of the light bouncing right back into the lens

The viewing distance is a the playing factor here. Try sitting far back. At or behind the point where projector is installed. From that distance i feel you should find it better. Yes i know shifting urself back defeats the purpose of having a bigger screen but one needs to accept the science of minimum viewing distance.

Also at that screen size the light severly bleeds on to walls and ceiling which may be making you feel the light is bouncing back. So it is important you have some light control in your room. If u r able to make it pitch dark, and non reflective dark/black walls, results are significantly better.

 

[digistar]

Hi Frds
After reading that thread & after taking help of HTfan & aditya bro, I have also ordered OPTOMA141x fro amazon.com
Its coming between 14 jan -20 jan..
I have read this thread post by post & get some useful information from htfan & aditya bro & some fellow members ..it will help me to make my HT system
thanks

 

[divakar_mba]

How much you have paid now

 

[digistar]

How much you have paid now

Hi Divakar
I have paid 53K ..Its inclusive all ..projector price +shipping+import duty..
I have paid in rupees so price was that as they put dollar cost some 71 rupees..more than exchange rate which was some 66-67 rs at that time.
thanks

 

[sathya9845]

Hi guys
Need help regarding power
Can I use it in 240v direct

 

[sathya9845]

Now I'm using with step down 110v

 

[htfan17]

yes it is universal voltage. Can use for both 110 and 220

 

[digistar]

Hi
I have received my optoma 141x ..It has different power plug..I have to buy indian socket.
I have bought APC ups..will it fit into it?
please reply.its urgent
thanks

 

[mands]

Hi
I have received my optoma 141x ..It has different power plug..I have to buy indian socket.
I have bought APC ups..will it fit into it?
please reply.its urgent
thanks

Hi, replied to this in your other post... I think it is universal, works for both 110 and 220. So go ahead an connect it to UPS.

 

[superb]

I have got a HD26 and it is 110-240v.

 

[manniraj]

Hi
I have received my optoma 141x ..It has different power plug..I have to buy indian socket.
I have bought APC ups..will it fit into it?
please reply.its urgent
thanks

If its universal voltage then just get a good quality 2 flat Pin plugs. You get for 5 to 10/- as well but those are of very bad quality and keeping your projector in mind better get something which holds the grip perfectly and should cost around 50 to 100/- and most of them come with universal pins, so you can use almost different country standards.

 

[sadiqdaredia]

Guys I am having problem I am getting lot of pink when I play cable on my projector,I have attached hdmi splitter,one for airtel he and one for media player,media player works fine but airtel gives lot of pink please help thanks

 

[divakar_mba]

Please suggest me good 3d glasses for this projector

 

[htfan17]

Please suggest me good 3d glasses for this projector

Go to ebay.in. Any 3D glasses with the words DLP Active 3D for projector will work. Preferably SainSonic. You can also pm forum member digistar . He had most recent experience in purchasing 3D glasses.

 

[divakar_mba]

Thanks for reply

 

[sanro]

Hi folks,

Need some help here plz.

I have just hooked my new HD26 and planning to project on 120" screen already in place.

when i switch it on ,it projects the image on the ceiling. I tried to play with the settings image shifting V/H , tilting projector by lifting it from the rear but couldn't resolve . half the image is still on the ceiling .

Projector is placed in shelf which is mounted on the back wall at approx. 8.5 feet from the floor.

Distance from screen to lense is 14 feet.
floor to bottom of the screen is 3 feet

Can someone please help with finding proper settings to project image properly on the screen?

thanks !

 

[rankesh]

Hi Guys,

Any light on filter cleaning of Optoma HD141x

Thanks in advance

 

[divakar_mba]

today i have received my optoma hd141x. is it supports Indian voltage?. it has limit of 110v to 220v