Showcase your ICE here

[santhosh]

After seeing all of your Audio Video Setup here, I have often wondered what kind of A/V setup you have in your Cars. So showcase your ICE(In Car Entertainment) here

 

[ashishkesarwani]

In My Innova I have Installed the Clarion Touch Screen DVD player with full control for Ipod. In front Doors I have installed JBL Component based speakers and on the rear door I have installed Blaupaunkt 2 Way speakers, for the Sub I am using the JBL 10" Bass tube connected through a Class D Sony Monoblock AMP, and all the door speakers are connected through a seperate 4 channel Kenwood Amp. There is a 7" Pioneer monitor installed on the roof of my Car for the rear passangers and for the front passangers the Unit's Monitor is a 5.5" thing which caters to the fronts.

In my other car i.e a Swift Dzire I have Installed a Pioneer Double Din Head Unit with Bluetooth and USB so this also control my Ipod as well as my Iphone. For fronts I have installed MTX Component Speakers with Dynamat for insulation, for rears too I replaced the stock speakers with the 3 way Oval speakers from Punch, its all connected by a Kenwood 4 channel AMP and the Subwoofer which is a sealed unit from Blaupunkt is connected through a silicon amp.

 

[neo]

In our octy we've TRU TECH billet 475 4ch amp, The spk are components from a korean brand called kickx, they have a Glass fibre mid bass & a silk dome tweeter. Head unit used to be a nakamichi CD45z but it died on me & is unrepairable hence i'm using an alpine 9830 supplied as stock in my octy. I've aslo damped my front doors with dynamat extreme. The spk cables & interconnects are belden & the power cable is audison

In our spark we've Image dynamics CTX 4"coax in the front & 6X9 on the rear parcel tray. The head unit is an alpine 9857(or something) the amp used to be an MTX thunder 6304 which also died on me recently & so getting a Kenwood 8404. The cables are same as above.

Cheers

 

[audiodelic]

Just recently sold my car but before that i was running ....
Alpine Head Unit
Precision Power DCX 1000.4 4 channel 125 x 4 RMS
Cadence CWM6 KIT 6.5" components
Infinity Reference 6010 CS 6.5' components
Orion 600d Monoblock
Pioneer 12" Subwoofer

 

[srinisundar]

Please guys,

Post your setup and inspire somebody to spend some cash.....I am ready to spend ONLY AFTER seeing yours..

Santhosh,,,,, Urs should be 1...

 

[santhosh]

Pics please

Thanks for sharing details on your ICE here. Request you to add pictures to your posts.

One of my close friends, Kiran has recently implemented a DIY carputer in his Swift DZire. I saw it last week and was totally impressed with how seamlessly it worked. He has a 7 inch Liliput touch screen with a CarPC software running on windows. Currently, he is running a pair of Hertz Components, may upgrade to 2.1 soon.

He is a member here, will request him to post pictures and details here.

 

[ravin]

My ICE: JVC K-545GD + MCOTT 6.5" separate + 6.5" combo + Kenwood KAC-843 + Performance Cables + American Dynamic

Car: Nissan Teana 200JK + Tein SS as my avatar

 

[bhagwan]

I-10 ICE [equipment & installation] Pictures - Team-BHP

I do not know if this is allowed;
I do hope that the moderator does not strike down this thread.

It shows what I installed in my 'wife's car.

I do think it is well documented.
Specially the sub woofer enclosure build part.
It is a long thread - but do try and go through it.
Rather informative...imo

Thanks,

 

[Ajay Kamath]

Thread isn't any good without pics. Please post with snaps of your installs.

This is not my car, but a setup that we recently installed in a close friend's Swift.

Kit -

Head Unit - Alpine 9886
Processor - Alpine PXA-H100
Front Speakers - Focal K2 Power 165 KRX3
Rear Speakers - Illusion Audio Carbon Series ND 6.1
Subwoofer - Illusion Audio Lucent Series Im10
Amplifiers - 1 x RF Power Series 4 channel + 1 x RF Power Series mono

View attachment 1861

View attachment 1862

View attachment 1863

View attachment 1864

View attachment 1865

 

[Ajay Kamath]

Contd.....

 

[Ajay Kamath]

Contd...

 

[Ajay Kamath]

Contd....

 

[Ajay Kamath]

Last set

 

[rallynut]

@ajay,very neat indeed.on a side note,my proposed ICE upgrade/install is still some time away .not to worry,will be begging for gyaan from u,and components too !!cheers

 

[mnhegde]

Nice Installs, Ajay. Finishing is excellent!

 

[bhagwan]

excellent job.
very well executed.
did not get to hear it - there ws no soft ware when I was @ 4S.
will listen to Jatin's car some time....
i am sure it will sound superb.
all the best !

 

[suri]

@ ajay kamath -

that looks extremely good - and should sound good!

one question - those components on the A-pillar - in the event of a frontal/oblique impact accident they could become dangerous/fatal projectiles for the passenger/driver?.

just a thought - and perhaps should not matter if the car is used only at slow speeds.

 

[unleash_me]

one question - those components on the A-pillar - in the event of a frontal/oblique impact accident they could become dangerous/fatal projectiles for the passenger/driver?

Exactly what I thought!

But otherwise, its an excellent job. Beautiful finish.

Cheers.

 

[santhosh]

Shanti: I have already seen your ICE on Team-bhp. Let me say it again here "SIMPLY SUPERB"

one question - those components on the A-pillar - in the event of a frontal/oblique impact accident they could become dangerous/fatal projectiles for the passenger/driver?.

Apart from this, it also increases/widens the blindspot caused by the already thick A-pillars in the Swift.

Nevertheless, fantastic execution Ajay. Lot of goodies have gone into this build:licklips:

 

[audiodelic]

nice fiber glass work