The Giveaway Thread

[sidvee]

Marantz 104 vintage tuner. It works decently, however haven't used in past 1.5 years, so not sure anymore. I replaced some lamps with a marantz official lamp kit. So lights up well.
1. I cannot ship, I don't have a box, and honestly not inclined to pack up etc.
2. I can give the unit only next weekend - June 6th-8th, as I am traveling this weekend. It won't be boxed.
3. Will be available in the Jubilee hills area of Hyd.
Cheers,
Sid
View attachment 91242

This is blocked for a FM.
Cheers,
Sid

 

[Vinod.R]

All Hyderabadis are lucky. The other ones are not. Good show Sidvee!

 

[sidvee]

All Hyderabadis are lucky. The other ones are not. Good show Sidvee!

Apologies to others, unfortunately no boxes etc., so shipping is a hassle, especially the heavier items. I have some more items, need to pull them out of storage area, will check them and post in a couple of weeks.
Cheers,
Sid

 

[Kannan]

Good initiative @sidvee

 

[zeta148]

A well known FM had given me this pair of 100 Mbps fibre converters to try. (One 5v pSU is missing.) However, they didn’t work well in my networIf anyone is interested, they can take it. Only local pickup

 

[007india]

Swans d1010 powered speakers that have been made passive. I messed with these by removing the amp. Also one woofer was distorting so I ordered a generic one from amazon (the speaker w/o grille), it doesn't fit very well. However when I used an external crossover they worked well. I was planning to buy 2 original woofers/decent crossovers, and refurbish these, but I don't have the patience. Only speakers available for pick up.
1. Cannot ship.
2. Available without box etc for pickup next weekend.
Cheers,
Sid
View attachment 91244

Good giveaway. Unfortunately I'm from Bangalore

 

[fLUX]

A well known FM had given me this pair of 100 Mbps fibre converters to try. (One 5v pSU is missing.) However, they didn’t work well in my networIf anyone is interested, they can take it. Only local pickup

DMed you

 

[zeta148]

DMed you

Reserved for flux

 

[007india]

Just figured out that I need to use 6ohm and above speaker for my yamaha rx 379. Any lower ohms will over load the AVR. Does anyone have 6ohm or above pair

 

[ketansethi1987]

Just figured out that I need to use 6ohm and above speaker for my yamaha rx 379. Any lower ohms will over load the AVR. Does anyone have 6ohm or above pair

Speakers may be connected in series to increase the resistance (ohms)

 

[007india]

Speakers may be connected in series to increase the resistance (ohms)

The AVR has seprate outputs for each channel. How to connect them in series ?

 

[ketansethi1987]

The AVR has seprate outputs for each channel. How to connect them in series ?

You will need to connect 2 speakers in each channel. Positive of one speaker shall be connected to negative of other speaker. Then positive of other speaker will go to positive of amplifier and negative of 1st speaker will go to negative of amplifier. You can search connecting speakers in series on youtube. Or dm me. Let us leave this thread for the give away