Xiaomi to launch Mi TV Q1 75" on 23rd March - QLED, 192 Zones, 120Hz
- Thread starter aditya2603d
- Start date
Unnecessary stress you guys are taking for a poor panel yada yada. It's a wise and great investment and worst comes to worst you are still in the first batch of this awesome product. Unbox and enjoy buddy
One of the reasons might be that the 1000 nits is the peak brightness achieved by MI in a 2% or 10% HDR window ( Settings maxed out). General public start assuming that 1000 nits is the full field brightness achieved in SDR . MI can put an asterisk next to 1000 nits but maybe they are wary of certain YouTube influencers who will measure the full field SDR brightness at around 700 or so nits n then spin a narrative claiming MI is engaging in false advertising.
IMO irrespective of the fact whether it is assembled in India this TV will have similar specs/ performance throughout its product cycle .
gpkumaran
Member
Mi. But it seems no installation until lockdown
vikrantxtrad
Well-Known Member
Very possible. This may be the case.
vikrantxtrad
Well-Known Member
Agreed. Only check for DSE, forget rest.
gpkumaran
Member
What s the meaning?
IonHawk
Active Member
Oh yeah, I know it can't do 4k@120Hz, I meant 1080p at 120Hz, should have specified that in my earlier post.As per reports by certain reviewers, the mitv cant do 4k at 120hz, whether hdr or not.
Mi QLED 75 TV Review : A fantastic large screen TV experience
The Mi QLED TV 75 is a 75-inch QLED priced at Rs 1,19,999. The TV has a 4K resolution with support for all popular HDR formats including HDR 10, HDR 10+, HLG and Dolby Vision.www.digit.in
vikrantxtrad
Well-Known Member
vikrantxtrad
Well-Known Member
Orginal 120hz also checked. Not a gimmick.
Not sure what was the original context, but yes, it should be able to do 4K, 120hz @4:20 but not at full bandwidth.
vikrantxtrad
Well-Known Member
The issue with mi qled isn't bandwidth. It's SoC.
With 'Full Bandwidth' - I meant @4:4:4 Croma sub-sampling, since the SoC is weak (you are right), it can't handle/process that much information required to display 4K,120Hz @4:4:4 sub-sampling.
vikrantxtrad
Well-Known Member
I think it's perfect to have a great 4k60 experience then. I don't even find difference between 60 and 120 at large distance plus Dolby Vision/HDR10+ can't be done on 120hz.
Some of the better news is that Local Dimming works on game mode.
cant wait for the shield pro to arrive, the UI is laggy AF right now when Playing 4K.
might be OT but do you guys use a voltage stabiliser or any equivalent product for TV and AV receiver? quality of electricity isn’t very good here in Gurgaon. Alol equipment is on a Belkin surge protector right now, which wont do anything for voltage fluctuation
might be OT but do you guys use a voltage stabiliser or any equivalent product for TV and AV receiver? quality of electricity isn’t very good here in Gurgaon. Alol equipment is on a Belkin surge protector right now, which wont do anything for voltage fluctuation
My Yamaha receiver burnt due to voltage fluctuations induced by switching between genset and regular supply. Since then, I have been using APC UPS with surge protector for the entire setup. I have two 600VA powering receiver, sw, TV, amazon echo, wifi router, and broadband modem. Usually, the switch between genset and regular power takes hardly a minute and these two UPSs are enough for that period ensuring there is no power drop and equipments don't suffer brute power on/off.
manindra.mukherjee
Active Member
While non essential delivery have been partially allowed in Maharashtra , MiQ1 75 inch is out of stock on Flipkart and also the HDFC EMI offer is also gone (was valid till 31st May). Mi website is not accepting any orders at all. Anybody been successful to place order via Mi portal
I would suggest you to wait for the HDFC offer on Flipkart. It usually comes and goes every fortnight.
Lobogris
New Member
I have never used any stabiliser for anything. Not for my inverter or regular ACs, not for my 75 inch or 55 inch TVs or anything else.
Never had any issues. Gurgaon is a large city. It is only in very rural areas that you have issues of low or high voltage. Most appliances are quite tolerant to a little voltage change.
TV was installed today. Its indeed huge and magnificent. I won't belabour on what already is said about the panel.
Now my issue.
I have connected the TV through HDMI to Yamaha 3067, eARC port on TV and HDMI in on 3067 thats also ARC.
However, Firestick 4K is not passing through 3067 to the TV. Firestick is connected to 3067.
What could be the issue.
Now my issue.
I have connected the TV through HDMI to Yamaha 3067, eARC port on TV and HDMI in on 3067 thats also ARC.
However, Firestick 4K is not passing through 3067 to the TV. Firestick is connected to 3067.
What could be the issue.
Get the Award Winning Diamond 12.3 Floorstanding Speakers on Special Offer
