sachu888
Well-Known Member
Hi Bilal,
Did you build it?
Regards
Sachin
Did you build it?
Regards
Sachin
Hi Sachin,Hi Bilal,
Did you build it?
Regards
Sachin
Looks okay to me. Just on boundaries. You may/may not able to do extra 1W mod. But your local weather may permit you.
If you could have placed scale along heatsink then it could have given better idea. I am confused between 10cm and 12.5cm edges.
Find the measurements marked. this is how I will have the sinks on sides.
Normal sinks provided with kits is 20cm length from front panel to back. Mine is only 12.5 Cm, though the fin size is higher and base is thicker, I am skeptical if its not sufficient.
Connected the power to the amp camp boards and set the bias to 10V DC.
Connected the input and output from the boards, (I didn't use the recommended way of using a bulb in series before power supply for first time power on) but I powered it on carefully to see if anything burns.
ACA illustrated build guide - diyAudio
Here is the thread which I was talking, if you haven't found it yet.
Just completed the build. Tested the bias voltage and it was right on spot (10.01v) not much drift after half hour. checked all terminals connections, all fine.
Problem is no sound now. Can you guys help to troubleshoot. Going around diyaudio threads but no proper leads. Mostly related on mods.