This is an Active 3-way floorstander using cylinders to mount the drivers.
I have used the following drivers for the project.
Brand: Peerless Fabrikkerne(I) Ltd.
1" Fabric Dome Tweeter: SR10DT x 1
5.25" Coated Paper Cone Mid-Range: M13NH x 2
10" Paper Cone Woofer: SB25NP x 1
Per channel.
Link provided below you can find images of all the major steps for this DIY Floorstander.
https://picasaweb.google.com/104550501856680949171/Active3WayFloorstanderProjIII#
I have used the following drivers for the project.
Brand: Peerless Fabrikkerne(I) Ltd.
1" Fabric Dome Tweeter: SR10DT x 1
5.25" Coated Paper Cone Mid-Range: M13NH x 2
10" Paper Cone Woofer: SB25NP x 1
Per channel.
- The Cylinders are of HDPE (High-density polyethylene) Pipe.
- Cuts are made with Metal Lathe.
- Frame made with two pieces of 1/2" MDF sticked together to form 1" thickness.
- Mainly intended for Tri-Amping.
- Dimension: 4.2ft (H), 1.3ft (W), 10" (D)
Link provided below you can find images of all the major steps for this DIY Floorstander.
https://picasaweb.google.com/104550501856680949171/Active3WayFloorstanderProjIII#
Attachments
Last edited: