Suggest me a hand drill

[Kannan_madhu]

please suggest me a economical drill which can be used to drill cabinets , heat sinks and for drilling wall to fix screws once in while .I have no idea about them and what wattage to take . Thanks in advance .

 

[sadik]

Go for "Bosch" or "Makita" with 13 mm chuck size. I am using "Bosch" without any kind of problem. Dont go for 10 mm chuck size as for RCA sockets (specially PCB Mounted) you will need 11.5 mm drill and with 10 mm chuck size you will not be able to drill size if required more than 10 mm.

 

[hydrovac]

I suggest you to use these bits for sheet metal drilling... (either with a 10 mm or 13 mm chuck) variable speed is a must.

Step Drill
These drill bits have a stepped profile and can cut a variety of diameters and are great for metal sheets of up to 1/8 inch thick. Each step in the drill enlarges the previous hole to a perfect round, which other wise not possible with a twist drill.

 

[antoniodias]

Sir,
Also try and consider rechargeable drill, where you can carry on your small works wirelessly. Or if you want a stronger and sturdy model please go as @hydrovac and @ Sadik suggested. Makita drills are quality machines, and so more on the price range

 

[Beginner_N]

If you are looking for power drill. KPT has well build quality. And what will be your primary usage? Cordless drill with high volt will cost more.

 

[jls001]

I'm a happy user of Skil model 6513. Half inch chuck, variable speed, hammer action for drilling on concrete + regular for steel it wood.
But equivalent Bosch or Makita or Black and Decker or Hitachi will all serve you equally well.

 

[all4music]

i've been using 13mm chuck size Black and Decker . running just fine.
as hydrovac mentioned, get those stepped drill bits - safer and effective compared to regular bits.

 

[Aniket]

Hi Kannan,

As suggested by Sadik bhai, go for a branded one. Makita, Bosch, Maktek, Hitachi, Stanley are all good. never skimp on the quality of tools.
you can try this also : https://www.amazon.in/Stanley-21076-Drill-Machine-Yellow/dp/B01LNJ1ZQ4


Regards,
Aniket

 

[Kannan_madhu]

Thanks for the suggestions , for me its very limited use may be doing one or two amps in a year or hanging some pic frames in the wall thats all my use . So the quality is going to be big issue for limited use ?

 

[sadik]

Bro.. Even if the use is limited i would suggest you to go for a Branded instead of cheap Chinese stuff. Now a days the branded are also manufactured in China but still they maintain their quality.

Bosch GSB 501 I have this drill machine. Chuck size is 13mm, variable speed, suitable for wood, metal and concrete.

 

[Dr.Lakshay]

From user experience I'd vote for Bosch. I have been using Bosch variable speed drill for many years. It's is one of the best you can get without burning a hole in your pocket.

 

[ashar]

i have been using bosch gsb re 10 mm. it has hammer action for masonry (wall concrete) drilling, and good variable speed and is reversible.

 

[flat_listener]

My take - If you're serious about DIY, then, buy something which is good (like Black & Decker, Bosch, Dewalt.. etc) & will become cheaper on long runs (esp when Bosch India has several service centers all over the country)

Confused... already scratching your head?

couple of links to confuse you more...

https://www.moglix.com/power-tools/drills/114160000

https://www.tolexo.com/power-tools/drills/

 

[a66]

I have Black & Decker, Bosch and Makita all are equaly good, The only big difference is first two are made in china where as Makita is made in Japan.

 

[Beginner_N]

KPT is made in India with one of the best build quality. Normally you will get all plactic body. KPT has casted motor housing in front.
http://www.kpt.co.in/power-tools/products/pages/drills/KPT10VR.php

 

[Kannan_madhu]

I checked the local shops and they don't have Bosch 13 mm right now price quoted was 2600, but no drill bits are there , how's the below package
Black+Decker HD555KA50 13mm 550 Watt Impact Drill Kit (50 Accessories), Orange https://www.amazon.in/dp/B01N4OMFH8/ref=cm_sw_r_cp_apa_i_YC8MBbQCQZS8D

 

[Kannan_madhu]

Thanks for the suggestions finally bought makita 13mm 500 w for 2350 bought few drill bits also

 

[hydrovac]

Congrats madhu! on your new acquisition... incidentally the shade matches your insect zapper...

 

[sadik]

Nice Bro ... Congrats on ur purchase. Its good to go with branded power tools.

 

[Kannan_madhu]

Congrats madhu! on your new acquisition... incidentally the shade matches your insect zapper...

both are aqua ...
Pls suggest commonly used drill bits (size , type) , for amp building and putting some screws to hang pic frames clocks etc