Dear all ( pass B1 group buy participants)
pics of the cabs being final assembled and packed will be uploaded tomm or monday
instructions and Updates
All members please use the contact form on
Sound Foundations - Homepage
and email me your shipping address with full name, Moniker,and tel number
Update : unfortunately there have been some unforeseen costs that i have had to pay from my pocket that i had not
anticipated earlier
The amount is rs 380/cabinet
(these costs were mainly due to extra finishing costs - i.e grinding of face plate on surface grinder before brush
finish buffing, also anodising costs very not as anticipated)
i request participants to
please bear with me - especially since this group build was done on cost basis
i do apologize for inconvenience caused or if someone feels cheated
hence now deposit amounts will be as follows
3101 will become 3101+380 = 3481
3102 will become 3102+380 = 3482
so on and so forth
Also those who have asked for an additional (for i p selector) knob please add rs 120 to the above total
As per my calculations
please check the following ( if there is a mistake let me know)
First column is the total amount to be transferred
3605 Captrajesh - 3105+380+120 - 2knobs - 6.9dia ip hole
3610 Stereorules - 3110+380+120 - 2knobs - 6.9dia ip hole
3604 svaze - 3104+380+120 - 2knobs - 6.9dia ip hole
3608 Doors666 - 3108+380+120 - 2knobs - 6.9dia ip hole
3613 Jai1611 - 3113+380+120 - 2knobs - 6.9dia ip hole
3607 Gobble - 3107+380+120 - 2knobs - 6.9dia ip hole
3612 Baswamin - 3112+380+120 - 2knobs - 6.9dia ip hole
3483 Kroyin - 3103+380 - 1 knobs - 5.5 dia ip hole
3489 Josephjohnt - 3109+380 -1 knobs - 5.5 dia ip hole
7091 Gopib - 3111+380+120(pass B1 -2knobs& 6.9dia ip hole ) + 3100+380 (bare bones)
3480 Omishra - 3100+380 (bare bones)
Note : to Omishra - please do not pay - your amount needs to be adjusted against my purchases from you
pics of the cabs being final assembled and packed will be uploaded tomm or monday
instructions and Updates
All members please use the contact form on
Sound Foundations - Homepage
and email me your shipping address with full name, Moniker,and tel number
Update : unfortunately there have been some unforeseen costs that i have had to pay from my pocket that i had not
anticipated earlier
The amount is rs 380/cabinet
(these costs were mainly due to extra finishing costs - i.e grinding of face plate on surface grinder before brush
finish buffing, also anodising costs very not as anticipated)
i request participants to
please bear with me - especially since this group build was done on cost basis
i do apologize for inconvenience caused or if someone feels cheated
hence now deposit amounts will be as follows
3101 will become 3101+380 = 3481
3102 will become 3102+380 = 3482
so on and so forth
Also those who have asked for an additional (for i p selector) knob please add rs 120 to the above total
As per my calculations
please check the following ( if there is a mistake let me know)
First column is the total amount to be transferred
3605 Captrajesh - 3105+380+120 - 2knobs - 6.9dia ip hole
3610 Stereorules - 3110+380+120 - 2knobs - 6.9dia ip hole
3604 svaze - 3104+380+120 - 2knobs - 6.9dia ip hole
3608 Doors666 - 3108+380+120 - 2knobs - 6.9dia ip hole
3613 Jai1611 - 3113+380+120 - 2knobs - 6.9dia ip hole
3607 Gobble - 3107+380+120 - 2knobs - 6.9dia ip hole
3612 Baswamin - 3112+380+120 - 2knobs - 6.9dia ip hole
3483 Kroyin - 3103+380 - 1 knobs - 5.5 dia ip hole
3489 Josephjohnt - 3109+380 -1 knobs - 5.5 dia ip hole
7091 Gopib - 3111+380+120(pass B1 -2knobs& 6.9dia ip hole ) + 3100+380 (bare bones)
3480 Omishra - 3100+380 (bare bones)
Note : to Omishra - please do not pay - your amount needs to be adjusted against my purchases from you