rotary dial hole at the front, toggle switch at the back.
Hi Doors666, what is the toggle switch for? I'm asking because you have already opted for making a hole in the front for the rotary switch.
rotary dial hole at the front, toggle switch at the back.
Hi Magma,
also the face plate cannot be detatched and reattatched more than a couple times- Reason the side panel is aluminum extrusion and the self tapping threads in extrusions wear out if you use them too much
For this reason i will be including some extra long screws meant for the front panel ( in case the original threads wear out - use these extra long screws - they will make their own threads as you screw them in )
Hi Doors666, what is the toggle switch for? I'm asking because you have already opted for making a hole in the front for the rotary switch.
In case somebody doesnt want to go for a rotary dial right away due to additional expense, they can use the hole at the back for a toggle switch.
How much extra expense for 2-pole, 2-position rotary switch (in place of toggle switch)? I feel everybody could move to that rotary switch.
Hi Magma,
Can't we put some plastic plug inside excursion before putting screws? This can save some aluminum. There are many types, you know better.
[/IMG]
Also if whole needs to be widened or made then can't anybody mask all surface with masking tape and use power drill to work?
Regards,
but why cant everyone just opt for an expanded hole inthe front ( i.e 6.9mm ) and use the same for the dpdt or ip selectorIn case somebody doesnt want to go for a rotary dial right away due to additional expense, they can use the hole at the back for a toggle switch.
The following participants are yet to give their option:-
Omishra
Kroyin
Rikhav
Gobble
Josephjohnt
Gopib
Kindly exercise your options so that we can finalise.
do this by the weekend
once i assemble the cabs - i will not accomodate requests
currently front ip selector hole stands at 5.5mm
rikhav is out
but
jaibir &
basawin are in
OM is opted for a bare bones
do this by the weekend
once i assemble the cabs - i will not accomodate requests
currently front ip selector hole stands at 5.5mm
rikhav is out
but
jaibir &
basawin are in
OM is opted for a bare bones
Ok updated the list here:
Omishra
Kroyin
Jai1611
Gobble
Josephjohnt
Gopib
Baswamin
Guys, please exercise your options by clicking the relevant part of my signature.
7 people have opted for the 2nd hole on the face plate for the rotary switch (dia 6.9mm), additional aluminium knob for the roatry switch and additional holes for RCA plugs to make it a total of four inputs.
Two people want bare bone cabinet. Two are yet to exercise their option.
@Magma, you can take your call accordingly.