Amp enclosures/chasis cabinets

[svaze]

3104 - Pass B1 Cab

Thanks,
Swapnil

 

[captrajesh]

group buy pre order has commenced

3101. Sachu 888 - pass B1 buffer cab
3102. Omishra - 1 bare bones + 2 specialized heatsink cab (similar to this Sound Foundations - Prime-S/R Speaker Stand but no H/W)

if interested please add your names in the following posts with serial number

Hi Magma, is this in continuation to your this post on the Pass B1 thread?

I had expressed my interest to join the group buy here

Is my expressing interest in the B1 thread good enough or do I need to opt in again here? If so, do add me for the cabinet, same as that of Sachin. My serial No. would be 3105??

 

[rikhav]

3106 - Pass B1 Cab

 

[gobble]

3107 Pass B1 cab

--G0bble

 

[doors666]

3108 - pass b1 cab

 

[josephjohnt]

3109 - Pass B1 cabinet

 

[stereorules]

3110 - Pass B1 cabinet

 

[gopib]

3111 - Pass B1 cabinet 1 No
- Specialized cabinet like Omishra's - 1No

 

[magma]

good momentum going
10cabs are good enough for my effort
will keep the pre orders open a couple days

then we close on the day i order the raw matl
probably friday saturday

 

[gobble]

Magma
Is there a cabinet that can be used for both Pass B1 + Linuxguru's Gainclone to make an integrated amp?

--G0bble

 

[magma]

Magma
Is there a cabinet that can be used for both Pass B1 + Linuxguru's Gainclone to make an integrated amp?

--G0bble

You just invaded my thoughts!

i had been thinking along these lines for two days now

but i purposely didnt stae this becase i have absolutely no idea how to adjust everything since i dont have the gainclone etc

 

[josephjohnt]

You just invaded my thoughts!

i had been thinking along these lines for two days now

but i purposely didnt stae this becase i have absolutely no idea how to adjust everything since i dont have the gainclone etc

If you can make one to fit all these that would be great, even i would like to have one.

 

[stereorules]

Even I'm using Linuxguru's clone ....But fitting everything into one enclosure would mean a different trafo ...and the space requirement would be more . But a nice thought ..

 

[magma]

heres a heatsink that arrived today for an F5 Turbo amp cab build
its a monstrous 6feet long extrusion
absolute killer

 

[magma]

Here are some prototype pics
cab going to sachu



Note: to all prospective buyers
Please do understand that is nothing but a decent DIY build.Please do not go around expecting a high end pristine finished OEM cab
i will wait for a day if any one wants to pull out or add
The group buy is then closed

 

[sachu888]

Hi Magma,
It looks good.One question,did you forget to drill hole in partition?

Regards,
Sachin

 

[magma]

Hi Magma,
It looks good.One question,did you forget to drill hole in partition?

Regards,
Sachin

CRAP!

yes i did!

where do you need the hole and how big

Actaully you may be able to do without the hole becuase the partition is actaully 5mm shorter in height than the sides , so you can actually route the wire over it
i did this puposely since the bare bones guys can make use of it too

but let me know what you think

 

[sachu888]

CRAP!

yes i did!

where do you need the hole and how big

Actaully you may be able to do without the hole becuase the partition is actaully 5mm shorter in height than the sides , so you can actually route the wire over it
i did this puposely since the bare bones guys can make use of it too

but let me know what you think

Thanks Magma,
Please refer this pic,hole size is 10mm.I will also need B1 holes close to input/output as I am not going to use input selector.

[URL=http://imageshack.us/photo/my-images/204/p1000647bo.jpg/] Uploaded with ImageShack.us[/URL]

Regards,
Sachin

 

[magma]

the 10 mm hole is possible
moving the pass B1 is NOT

 

[sachu888]

the 10 mm hole is possible
moving the pass B1 is NOT

No problem,I will manage.

Regards,
Sachin