It depends on FS setting selected - Auto, DD and DD+.
Xiaomi to launch Mi TV Q1 75" on 23rd March - QLED, 192 Zones, 120Hz
- Thread starter aditya2603d
- Start date
some time back multichannel formats other than dd or dd+ were streamed as pcm audio to the avr and avr displayed pcm. But now all the other formats are encoded to dd+ including the losless dtshdma and avr displays dd+ for everything.
manindra.mukherjee
Active Member
How much did the AVR cost you and where did you buy this from...if you could PM
What are you trying to do ?
If new TV installation, then ask MI they will do it for free and the engineer will charge in case of wall mount.
Yes I was placing the installation request as you can see on the screenshot. Btw how you placed the installation request?
What are you trying to do ?
If new TV installation, then ask MI engineer they will do it
Call them up.
manindra.mukherjee
Active Member
Today afternoon a strange thing happened. The TV powered on but I could see nothing on screen. Sound was present. Realized that display has gone extremely dim and used a flashlight to confirm. The TV had indeed powered on but no led backlight possibly had gone kaput. With a lot of anguish and disappointment , called the local Mi service guy and told him of the problem. He said could be a led backlight issue. He said he would send somebody.
Disconnected everything after sometime and power on and the tv came to life. Not sure what had happened. Would keep a close watch . I hope this doesn't repeat again.
For the time being looks like a rogue power connector from my surge protector
Disconnected everything after sometime and power on and the tv came to life. Not sure what had happened. Would keep a close watch . I hope this doesn't repeat again.
For the time being looks like a rogue power connector from my surge protector
Last edited:
Using FireStick? And sound through TV or AVR?
manindra.mukherjee
Active Member
Yes..using FireStick and sound via AVR. However at that point since AVR was off , sound was coming from tv speaker only. Have you experienced anything like this before
vikrantxtrad
Well-Known Member
Seems like HDMI, USB issue to me.
Last edited:
I guess, yes with FS.. screen went black. Had to recycle FS's power.
Done installation is scheduled for tomorrow Also I have selected the 1200 mounting which is moveable.
vikrantxtrad
Well-Known Member
After big wait, I finally ordered a soundbar which comes with wireless subwoofer too.
manindra.mukherjee
Active Member
I encountered same problem yesterday night again. The screen went blank and nothing could bring it back to life. Disconnected all HDMI / USB devices . recycled power , used different power source but still the TV wont work. Infact the TV did boot and had a extremely dim display as i could hear sound while i was scrolling through the mi tv remote. On looking closer to the screen , i could see the home screen patchwall menu but that was vey faint. Recorded the video and have uploaded to youtube
Logged a call with Mi service center . Donot want to jump to conclusion but i feel like this could be led backlight issue .
Today morning when i switched on the TV , all was fine again. Lets see how long does that work.
Last edited:
You bought this tv in june right ?
And got it replaced once and the 2nd tv is now giving you issues.
Could happen to any product..
Hmm.
That's why I'm purchasing extended warranty as the product is good but the company doens't have a good track record.
This indeed is a problem. Your replaced TV was made in which month?
manindra.mukherjee
Active Member
The replacement was made just 2 weeks back
Check out our special offers on Stereo Package & Bundles for all budget types.
